| 1 | 软件无线电装置主体 | | | |
| 1.1 | 射频性能 | / | 4发4收，独立可调制。1 MHz到7.2 GHz,最高课调整至8 GHz | |
| | | 每通道不小于 400 MHz 带宽 | |
| 1.2 | 处理系统 | / | - | |
| 1.3 | 可编程逻辑单元 | / | FPGA: RFSoC ZU28DR | |
| | | 2 × 4 GB DDR4 | |
| 1.4 | 适配软件 | / | UHD version 4.1 or later | |
| | | RFNoC | |
| | | GNU Radio | |
| | | C/C++ | |
| | | Python | |
| | | OpenEmbedded Linux on A53 | |
| | | NI-USRP 20.8 or later | |
| | | LabVIEW 2020 or later | |
| | | LabVIEW FPGA 2020 or later | |
| | | Matlab R2022a | |
| 1.5 | 时钟同步方式 | / | REF IN (clock reference input) | |
| | | PPS IN (PPS time reference) | |
| | | TRIG IN/OUT | |
| | | GPSDO included | |
| | | OCXO included | |
| 1.6 | 数字接口 | / | 2 QSFP28 (10/100 GbE, Aurora) | |
| | | 2 iPass+ zHD (cabled PCIe Gen3 x8)[2] | |
| | | Ethernet (1 GbE to PS) | |
| | | 2 USB-C (USB to PS, Console/JTAG) | |
| | | 2 HDMI (GPIO) | |
| 1.7 | 输入电源 | / | 12 V DC, 16 A 最大 | |
| 1.8 | 尺寸体积 | / | 不大于29cm × 23 cm × 5cm | |
| 1.9 | ADC分辨率 | / | 12 bit | |
| 1.1 | DAC分辨率 | / | 14 bit | |
| 1.11 | 频率步进 | / | <1 Hz | |
| 1.12 | RF最大输出功率 | / | 不小于23 dBm | |
| 1.13 | 频率准确度 | / | OCXO (未锁定GPS) | |
| | | 2.5 ppm | |
| | | | |
| | | OCXO (GPS驯服状态) | |
| | | 5 ppb | |
