青海高端网站建设多少钱福州网seo

一.项目示例

分析:

以上这种属于检测液体是否发表, 由于相机拍摄很模糊,下面我们会用到,

图像与处理工具,CogIPOneImageTool  ,和像素处理 CogPixelMapTool

二 . 原图:

三. 题目要求

液位高度检测  手动定义一条基准线(绿色线条 通过卡尺工具和createline)  测量值液位高度到基准线高度  大于130 小于110为NG

四. 解决方法

注意:我这里写的比较少,好多工具都是手搓出来的

1.工具

2.图像处理

 

3.接下来,就是我手搓的两个工具 CogCreateSegmentTool  和  CogDistanceSegmentLineTool  (这里就不给大家拉了,学习任务繁重,望理解)

 拉好之后是这个样子

4.声明

 CogGraphicCollection dt = new CogGraphicCollection();CogGraphicLabel label;CogCreateSegmentTool segment;CogDistanceSegmentLineTool segmentLine;

5.将拉的工具进行声明

    dt.Clear();CogPixelMapTool pixel = mToolBlock.Tools["CogPixelMapTool1"]as CogPixelMapTool;CogPMAlignTool pma = mToolBlock.Tools["CogPMAlignTool1"]as CogPMAlignTool;CogCaliperTool caliper = mToolBlock.Tools["CogCaliperTool1"]as CogCaliperTool;CogCreateLineTool line = mToolBlock.Tools["CogCreateLineTool1"]as CogCreateLineTool;

6.循环并创建多个卡尺

  for(int i = 0;i < pma.Results.Count;i++){caliper.Region.CenterX = pma.Results[i].GetPose().TranslationX;caliper.Region.CenterY = pma.Results[i].GetPose().TranslationY;caliper.Run();

7.给卡尺的位置创建一条线段

 segment = new CogCreateSegmentTool();segment.InputImage = pixel.OutputImage;segment.Segment.StartX = caliper.Results[0].Edge0.PositionX;segment.Segment.StartY = caliper.Results[0].Edge0.PositionY;segment.Segment.EndX = caliper.Results[0].Edge0.PositionX + 20;segment.Segment.EndY = caliper.Results[0].Edge0.PositionY;segment.Run();segment.GetOutputSegment().Color = CogColorConstants.Purple;dt.Add(segment.GetOutputSegment());

8.线段连接线,找出线段到线的那段距离

segmentLine = new CogDistanceSegmentLineTool();segmentLine.InputImage = pixel.OutputImage;segmentLine.Segment = segment.GetOutputSegment();segmentLine.Line = line.GetOutputLine();segmentLine.Run();

9.判断,距离是否合格

 label = new CogGraphicLabel();double width = Math.Round((segmentLine.Distance),2);double x = caliper.Results[0].Edge0.PositionX;double y = caliper.Results[0].Edge0.PositionY;if(width > 130 || width < 110){label.Color = CogColorConstants.Red;label.SetXYText(x, y -15, "NG:" + width);}else{label.Color = CogColorConstants.Green;label.SetXYText(x, y -15, "OK:" + width);}label.Font = new Font("楷体", 15);dt.Add(label);}  

10.最后把集合遍历出来,放在你想要放的工具页面上去

 foreach(ICogGraphic s in dt){mToolBlock.AddGraphicToRunRecord(s, lastRecord, "CogPixelMapTool1.输出图像", "script");}

五. 代码

#region namespace imports
using System;
using System.Collections;
using System.Drawing;
using System.IO;
using System.Windows.Forms;
using Cognex.VisionPro;
using Cognex.VisionPro.ToolBlock;
using Cognex.VisionPro3D;
using Cognex.VisionPro.ImageProcessing;
using Cognex.VisionPro.PixelMap;
using Cognex.VisionPro.PMAlign;
using Cognex.VisionPro.CalibFix;
using Cognex.VisionPro.Caliper;
using Cognex.VisionPro.Dimensioning;
#endregionpublic class CogToolBlockAdvancedScript : CogToolBlockAdvancedScriptBase
{#region Private Member Variablesprivate Cognex.VisionPro.ToolBlock.CogToolBlock mToolBlock;#endregionCogGraphicCollection dt = new CogGraphicCollection();CogGraphicLabel label;CogCreateSegmentTool segment;CogDistanceSegmentLineTool segmentLine;/// <summary>/// Called when the parent tool is run./// Add code here to customize or replace the normal run behavior./// </summary>/// <param name="message">Sets the Message in the tool's RunStatus.</param>/// <param name="result">Sets the Result in the tool's RunStatus</param>/// <returns>True if the tool should run normally,///          False if GroupRun customizes run behavior</returns>public override bool GroupRun(ref string message, ref CogToolResultConstants result){// To let the execution stop in this script when a debugger is attached, uncomment the following lines.// #if DEBUG// if (System.Diagnostics.Debugger.IsAttached) System.Diagnostics.Debugger.Break();// #endifdt.Clear();CogPixelMapTool pixel = mToolBlock.Tools["CogPixelMapTool1"]as CogPixelMapTool;CogPMAlignTool pma = mToolBlock.Tools["CogPMAlignTool1"]as CogPMAlignTool;CogCaliperTool caliper = mToolBlock.Tools["CogCaliperTool1"]as CogCaliperTool;CogCreateLineTool line = mToolBlock.Tools["CogCreateLineTool1"]as CogCreateLineTool;// Run each tool using the RunTool functionforeach(ICogTool tool in mToolBlock.Tools)mToolBlock.RunTool(tool, ref message, ref result);for(int i = 0;i < pma.Results.Count;i++){caliper.Region.CenterX = pma.Results[i].GetPose().TranslationX;caliper.Region.CenterY = pma.Results[i].GetPose().TranslationY;caliper.Run();segment = new CogCreateSegmentTool();segment.InputImage = pixel.OutputImage;segment.Segment.StartX = caliper.Results[0].Edge0.PositionX;segment.Segment.StartY = caliper.Results[0].Edge0.PositionY;segment.Segment.EndX = caliper.Results[0].Edge0.PositionX + 20;segment.Segment.EndY = caliper.Results[0].Edge0.PositionY;segment.Run();segment.GetOutputSegment().Color = CogColorConstants.Purple;dt.Add(segment.GetOutputSegment());segmentLine = new CogDistanceSegmentLineTool();segmentLine.InputImage = pixel.OutputImage;segmentLine.Segment = segment.GetOutputSegment();segmentLine.Line = line.GetOutputLine();segmentLine.Run();label = new CogGraphicLabel();double width = Math.Round((segmentLine.Distance),2);double x = caliper.Results[0].Edge0.PositionX;double y = caliper.Results[0].Edge0.PositionY;if(width > 130 || width < 110){label.Color = CogColorConstants.Red;label.SetXYText(x, y -15, "NG:" + width);}else{label.Color = CogColorConstants.Green;label.SetXYText(x, y -15, "OK:" + width);}label.Font = new Font("楷体", 15);dt.Add(label);}  return false;}#region When the Current Run Record is Created/// <summary>/// Called when the current record may have changed and is being reconstructed/// </summary>/// <param name="currentRecord">/// The new currentRecord is available to be initialized or customized.</param>public override void ModifyCurrentRunRecord(Cognex.VisionPro.ICogRecord currentRecord){}#endregion#region When the Last Run Record is Created/// <summary>/// Called when the last run record may have changed and is being reconstructed/// </summary>/// <param name="lastRecord">/// The new last run record is available to be initialized or customized.</param>public override void ModifyLastRunRecord(Cognex.VisionPro.ICogRecord lastRecord){foreach(ICogGraphic s in dt){mToolBlock.AddGraphicToRunRecord(s, lastRecord, "CogPixelMapTool1.输出图像", "script");}}#endregion#region When the Script is Initialized/// <summary>/// Perform any initialization required by your script here/// </summary>/// <param name="host">The host tool</param>public override void Initialize(Cognex.VisionPro.ToolGroup.CogToolGroup host){// DO NOT REMOVE - Call the base class implementation first - DO NOT REMOVEbase.Initialize(host);// Store a local copy of the script hostthis.mToolBlock = ((Cognex.VisionPro.ToolBlock.CogToolBlock)(host));}#endregion}