嘉兴企业网站制作大连公司

主流技术&(IPS/FW/主备-主主快速切换）

一、RBM主备方案

RBM-FW-P 主配置内容介绍-注释

1. remote-backup group 含义：定义了一个远程备份组。这表明设备支持某种形式的远程备份功能，用于在设备之间同步配置或数据。
2. data-channel interface GigabitEthernet1/0/11 含义：指定用于远程备份的数据通道接口为GigabitEthernet1/0/11。 作用：备份数据将通过这个接口发送到远程设备，确保备份操作的数据传输路径明确。
3. configuration sync-check interval 12 含义：设置配置同步检查的间隔时间为12秒。 作用：设备会每隔12秒检查一次配置是否需要同步，确保本地和远程设备的配置保持一致。
4. delay-time 5 含义：设置延迟时间为5秒。 作用：在执行某些操作（如备份或同步）之前，会延迟5秒。这可能是为了避免网络瞬时问题或确保设备状态稳定后再进行操作。
5. local-ip 10.100.2.1 含义：指定本地设备的IP地址为10.100.2.1。 作用：这是本地设备在网络中的标识，用于与其他设备通信。
6. remote-ip 10.100.2.2 含义：指定远程设备的IP地址为10.100.2.2。 作用：这是远程备份设备的IP地址，本地设备会通过这个IP地址与远程设备通信，进行数据备份或配置同步。
7. device-role primary 含义：指定本地设备的角色为“主设备”。 作用：在备份组中，主设备通常负责发起备份操作或作为主要的配置管理设备。如果存在备用设备，备用设备可能会在主设备故障时接管其功能。

remote-backup groupdata-channel interface GigabitEthernet1/0/11configuration sync-check interval 12delay-time 5 local-ip 10.100.2.1remote-ip 10.100.2.2device-role primary

RBM-FW-S 备配置介绍

remote-backup groupdata-channel interface GigabitEthernet1/0/11configuration sync-check interval 12delay-time 5local-ip 10.100.2.2remote-ip 10.100.2.1device-role secondary

二、RBM主主方案介绍

FW-RBM-P配置

1、加上 RBM_P[FW-RBM-S-remote-backup-group]backup-mode dual-active //RBM从主备切换到主主的方案

FW-RBM-S配置

1、删除 RBM_P[FW-RBM-S-remote-backup-group]undo device-role secondary

2、加上 RBM_P[FW-RBM-S-remote-backup-group]backup-mode dual-active //RBM从主备切换到主主的方案

三、RBM从主主切换到主备

FW-RBM-P

RBM_P<FW-RBM-P>display  remote-backup-group  status 
Remote backup group information:Backup mode: Dual-activeDevice management role: PrimaryDevice running status: ActiveData channel interface: GigabitEthernet1/0/11Local IP: 10.100.2.1Remote IP: 10.100.2.2    Destination port: 60064Control channel status: DisconnectedKeepalive interval: 1sKeepalive count: 10Configuration consistency check interval: 12 hourConfiguration consistency check result: Not PerformedConfiguration backup status: Auto sync enabledSession backup status: Hot backup enabledDelay-time: 5 minUptime since last switchover: 0 days, 0 hours, 38 minutesSwitchover records:Time                  Status change        Cause2025-03-26 20:31:27   Initial to Active    HA Configuration changed
RBM_P<FW-RBM-P>RBM_P<FW-RBM-S>display  remote-backup-group  status 
Remote backup group information:Backup mode: Dual-activeDevice management role: PrimaryDevice running status: ActiveData channel interface: GigabitEthernet1/0/11Local IP: 10.100.2.2Remote IP: 10.100.2.1    Destination port: 60064Control channel status: DisconnectedKeepalive interval: 1sKeepalive count: 10Configuration consistency check interval: 12 hourConfiguration consistency check result: Not PerformedConfiguration backup status: Auto sync enabledSession backup status: Hot backup enabledDelay-time: 5 minUptime since last switchover: 0 days, 0 hours, 16 minutesSwitchover records:Time                  Status change        Cause2025-03-26 20:54:53   Initial to Active    HA Configuration changed2025-03-26 20:54:30   Active to Initial    HA Configuration changed2025-03-26 20:34:31   Initial to Active    HA Configuration changed
RBM_P<FW-RBM-S>

FW-RBM-S

---

切换流程:从主主切换到主备

理解一下下面的内容

RBM_P[FW-RBM-P-remote-backup-group]display  this
#
remote-backup group
 backup-mode dual-active
 data-channel interface GigabitEthernet1/0/11
 configuration sync-check interval 12
 delay-time 5
 local-ip 10.100.2.1
 remote-ip 10.100.2.2
 device-role primary
#
return

RBM_P[FW-RBM-P-remote-backup-group]undo   backup-mode
RBM_P[FW-RBM-P-remote-backup-group]display  this
#
remote-backup group
 data-channel interface GigabitEthernet1/0/11
 configuration sync-check interval 12
 delay-time 5
 local-ip 10.100.2.1
 remote-ip 10.100.2.2
 device-role primary
#
return

RBM_P[FW-RBM-S-remote-backup-group]display  this
#
remote-backup group
 backup-mode dual-active
 data-channel interface GigabitEthernet1/0/11
 configuration sync-check interval 12
 delay-time 5
 local-ip 10.100.2.2
 remote-ip 10.100.2.1
 device-role primary
#
return
RBM_P[FW-RBM-S-remote-backup-group]

RBM_P[FW-RBM-S-remote-backup-group]
RBM_P[FW-RBM-S-remote-backup-group]display  this
#
remote-backup group
 backup-mode dual-active
 data-channel interface GigabitEthernet1/0/11
 configuration sync-check interval 12
 delay-time 5
 local-ip 10.100.2.2
 remote-ip 10.100.2.1
 device-role primary
#
return
RBM_P[FW-RBM-S-remote-backup-group]un
RBM_P[FW-RBM-S-remote-backup-group]undo  backup-mode
RBM_P[FW-RBM-S-remote-backup-group]device-role secondary
 

---

四、配置信息