全国八大员报名官方网站企业网站如何建设温州

---

---

前言

本文再网络结构（1）的基础上，完善数据读取、数据增强、数据处理、模型训练、断点训练等功能。

---

一、库导入与配置部分

import torch
import torch.nn as nn  # PyTorch核心神经网络模块
import pandas as pd    # 数据处理
import numpy as np     # 数值计算
from torch.utils.data import Dataset, DataLoader  # 数据加载工具
from sklearn.preprocessing import StandardScaler  # 数据标准化
from sklearn.model_selection import train_test_split  # 数据分割
from torch.optim.lr_scheduler import ReduceLROnPlateau  # 动态学习率调整
from collections import Counter  # 统计类别分布
import csv  # 结果记录
import time  # 时间戳生成
import joblib  # 模型/参数持久化

介绍

导入Pytorch核心神经网路模块、数据处理库和数值处理库数据标准化、数据分割、动态学习率调整、统计类别分布、结果记录、时间戳生成、模型/参数持久化。

二、超参数配置

config = {"batch_size": 256,        # 每批数据量"num_workers": 128,       # 数据加载并行进程数"lr": 1e-3,               # 初始学习率"weight_decay": 1e-4,     # L2正则化强度"epochs": 200,            # 最大训练轮数"patience": 15,           # 早停等待轮数"min_delta": 0.001,       # 视为改进的最小精度提升"grad_clip": 5.0,         # 梯度裁剪阈值"num_classes": None       # 自动计算类别数
}

简介

设置每批数据量、数据加载并行进程数、初始学习率、L2正则化强度、最大训练轮数、早停等待轮数、视为改进的最小精度提升、梯度剪裁阈值、自动计算类别数。

三、模型定义

1. 改进残差块

class ImprovedResBlock(nn.Module):def __init__(self, in_channels, out_channels, stride=1):super().__init__()  # 初始化父类# 第一个卷积层self.conv1 = nn.Conv1d(in_channels, out_channels, 5, stride, 2)# 参数解释：输入通道，输出通道，卷积核大小5，步长，填充2（保持尺寸）self.bn1 = nn.BatchNorm1d(out_channels)  # 批量归一化# 第二个卷积层self.conv2 = nn.Conv1d(out_channels, out_channels, 3, 1, 1)# 3x1卷积，步长1，填充1保持尺寸self.bn2 = nn.BatchNorm1d(out_channels)self.relu = nn.ReLU()  # 激活函数# 下采样路径（当需要调整维度时）self.downsample = nn.Sequential(nn.Conv1d(in_channels, out_channels, 1, stride),  # 1x1卷积调整维度nn.BatchNorm1d(out_channels)) if in_channels != out_channels or stride != 1 else None# 当输入输出通道不同或步长>1时启用def forward(self, x):identity = x  # 保留原始输入作为残差# 主路径处理x = self.relu(self.bn1(self.conv1(x)))  # Conv1 -> BN1 -> ReLUx = self.bn2(self.conv2(x))  # Conv2 -> BN2（无激活）# 调整残差路径维度if self.downsample:identity = self.downsample(identity)x += identity  # 残差连接return self.relu(x)  # 最终激活

2. 完整CNN模型

class EnhancedCNN(nn.Module):def __init__(self, input_channels, seq_len, num_classes):super().__init__()# 初始特征提取层self.initial = nn.Sequential(nn.Conv1d(input_channels, 64, 7, stride=2, padding=3),  # 快速下采样nn.BatchNorm1d(64),nn.ReLU(),nn.MaxPool1d(3, 2, 1)  # 核3，步长2，填充1，输出尺寸约为输入1/4)# 残差块堆叠self.blocks = nn.Sequential(ImprovedResBlock(64, 128, stride=2),  # 通道翻倍，尺寸减半ImprovedResBlock(128, 256, stride=2),ImprovedResBlock(256, 512, stride=2),nn.AdaptiveAvgPool1d(1)  # 自适应全局平均池化到长度1)# 分类器self.classifier = nn.Sequential(nn.Linear(512, 256),     # 全连接层nn.Dropout(0.5),         # 强正则化防止过拟合nn.ReLU(),nn.Linear(256, num_classes)  # 最终分类层)def forward(self, x):x = self.initial(x)  # 初始特征提取x = self.blocks(x)   # 通过残差块x = x.view(x.size(0), -1)  # 展平维度 (batch, 512)return self.classifier(x)  # 分类预测

四、数据集类

class SequenceDataset(Dataset):def __init__(self, sequences, labels, scaler=None):self.sequences = sequences  # 原始序列数据self.labels = labels        # 对应标签self.scaler = scaler or StandardScaler()  # 标准化器# 如果未提供scaler，用当前数据拟合新的if scaler is None:flattened = np.concatenate(sequences)  # 展平所有数据点self.scaler.fit(flattened)  # 计算均值和方差# 对每个序列进行标准化self.normalized = [self.scaler.transform(seq) for seq in sequences]def __len__(self):return len(self.sequences)  # 返回数据集大小def __getitem__(self, idx):# 获取单个样本seq = torch.tensor(self.normalized[idx], dtype=torch.float32).permute(1, 0)# permute将形状从(seq_len, features)转为(features, seq_len)符合Conv1d输入要求label = torch.tensor(self.labels[idx], dtype=torch.long)# 数据增强if np.random.rand() > 0.5:  # 50%概率时序翻转seq = seq.flip(-1)  # 沿时间维度翻转if np.random.rand() > 0.3:  # 70%概率添加噪声seq += torch.randn_like(seq) * 0.01  # 高斯噪声(均值0，方差0.01)return seq, label

五、数据加载函数

def load_data(excel_path):df = pd.read_excel(excel_path)  # 读取Excel数据sequences = []labels = []for _, row in df.iterrows():  # 遍历每一行数据try:# 处理可能存在的字符串格式异常loads = list(map(float, str(row['载荷']).split(',')))displacements = list(map(float, str(row['位移']).split(',')))powers = list(map(float, str(row['功率']).split(',')))# 对齐三列数据的长度min_len = min(len(loads), len(displacements), len(powers))# 组合成(时间步长, 3个特征)的数组combined = np.array([loads[:min_len], displacements[:min_len], powers[:min_len]).T  # 转置为(min_len, 3)label = int(float(row['工况结果']))  # 转换标签sequences.append(combined)labels.append(label)except Exception as e:print(f"处理第{_}行时出错: {str(e)}")  # 异常处理# 统计类别分布label_counts = Counter(labels)print("类别分布:", label_counts)# 创建标签映射（将任意标签转换为0~N-1的索引）unique_labels = sorted(list(set(labels)))label_map = {l:i for i,l in enumerate(unique_labels)}config["num_classes"] = len(unique_labels)  # 更新配置labels = [label_map[l] for l in labels]  # 转换所有标签# 分层划分训练/验证集（保持类别比例）return train_test_split(sequences, labels, test_size=0.2, stratify=labels)

六、训练函数

def train_epoch(model, loader, optimizer, criterion, device):model.train()  # 训练模式total_loss = 0for x, y in loader:  # 遍历数据加载器x, y = x.to(device), y.to(device)  # 数据迁移到设备optimizer.zero_grad()  # 清空梯度outputs = model(x)     # 前向传播loss = criterion(outputs, y)  # 计算损失loss.backward()        # 反向传播# 梯度裁剪防止爆炸nn.utils.clip_grad_norm_(model.parameters(), config["grad_clip"])optimizer.step()       # 参数更新total_loss += loss.item() * x.size(0)  # 累加损失（考虑批次大小）return total_loss / len(loader.dataset)  # 平均损失

七、验证函数

def validate(model, loader, criterion, device):model.eval()  # 评估模式total_loss = 0correct = 0with torch.no_grad():  # 禁用梯度计算for x, y in loader:x, y = x.to(device), y.to(device)outputs = model(x)            loss = criterion(outputs, y)total_loss += loss.item() * x.size(0)# 计算准确率preds = outputs.argmax(dim=1)  # 取最大概率类别correct += preds.eq(y).sum().item()  # 统计正确数return (total_loss / len(loader.dataset),  # 平均损失(correct / len(loader.dataset))    # 准确率

八、检查点管理

def save_checkpoint(epoch, model, optimizer, scheduler, best_acc, scaler, filename="checkpoint.pth"):torch.save({'epoch': epoch,                    # 当前轮数'model_state_dict': model.state_dict(),          # 模型参数'optimizer_state_dict': optimizer.state_dict(),  # 优化器状态'scheduler_state_dict': scheduler.state_dict(),  # 学习率调度器状态'best_acc': best_acc,              # 当前最佳准确率'scaler': scaler                   # 数据标准化参数}, filename)def load_checkpoint(filename, model, optimizer, scheduler):checkpoint = torch.load(filename)model.load_state_dict(checkpoint['model_state_dict'])       # 加载模型optimizer.load_state_dict(checkpoint['optimizer_state_dict']) scheduler.load_state_dict(checkpoint['scheduler_state_dict'])return checkpoint['epoch'], checkpoint['best_acc'], checkpoint['scaler']

九、主函数

def main(resume=False):device = torch.device("cuda" if torch.cuda.is_available() else "cpu")  # 自动选择设备# 生成带时间戳的结果文件名timestamp = time.strftime("%Y%m%d_%H%M%S")results_file = f"training_results_{timestamp}.csv"# 加载并划分数据train_seq, val_seq, train_lb, val_lb = load_data("./dcgt.xls")# 初始化模型（恢复训练时自动获取序列长度）sample_seq = train_seq[0].shape[1] if resume else Nonemodel = EnhancedCNN(input_channels=3, seq_len=sample_seq,  num_classes=config["num_classes"]).to(device)# 定义损失函数和优化器criterion = nn.CrossEntropyLoss()optimizer = torch.optim.AdamW(model.parameters(), lr=config["lr"], weight_decay=config["weight_decay"])# 学习率调度器（根据验证损失调整）scheduler = ReduceLROnPlateau(optimizer, 'min', factor=0.5, patience=5)# 恢复训练逻辑start_epoch = 0best_acc = 0if resume:checkpoint = torch.load("checkpoint.pth")model.load_state_dict(checkpoint['model_state_dict'])optimizer.load_state_dict(checkpoint['optimizer_state_dict'])scheduler.load_state_dict(checkpoint['scheduler_state_dict'])start_epoch = checkpoint['epoch']best_acc = checkpoint['best_acc']train_set = SequenceDataset(train_seq, train_lb, scaler=checkpoint['scaler'])else:train_set = SequenceDataset(train_seq, train_lb)# 验证集使用训练集的scalerval_set = SequenceDataset(val_seq, val_lb, scaler=train_set.scaler)# 持久化标准化参数joblib.dump(train_set.scaler, 'scaler.save')# 创建数据加载器train_loader = DataLoader(train_set, batch_size=config["batch_size"], shuffle=True, num_workers=config["num_workers"]  # 多进程加载加速)val_loader = DataLoader(val_set, batch_size=config["batch_size"], num_workers=config["num_workers"])# 训练循环with open(results_file, 'w', newline='') as f:writer = csv.writer(f)writer.writerow(['epoch', 'train_loss', 'val_loss', 'val_acc', 'learning_rate'])for epoch in range(start_epoch, config["epochs"]):# 训练一个epochtrain_loss = train_epoch(model, train_loader, optimizer, criterion, device)# 验证val_loss, val_acc = validate(model, val_loader, criterion, device)current_lr = optimizer.param_groups[0]['lr']  # 获取当前学习率# 更新学习率scheduler.step(val_loss)# 保存检查点save_checkpoint(epoch+1, model, optimizer, scheduler, best_acc, train_set.scaler)# 记录结果writer.writerow([epoch + 1, f"{train_loss:.4f}", f"{val_loss:.4f}", f"{val_acc:.4f}", f"{current_lr:.6f}"])print(f"\nEpoch {epoch+1}/{config['epochs']}")print(f"Train Loss: {train_loss:.4f} | Val Loss: {val_loss:.4f}")print(f"Val Acc: {val_acc*100:.2f}% | Learning Rate: {current_lr:.6f}")# 早停逻辑（伪代码示意）if val_acc > best_acc + config["min_delta"]:best_acc = val_accpatience_counter = 0else:patience_counter += 1if patience_counter >= config["patience"]:print(f"早停触发于第{epoch+1}轮")break# 保存最终模型torch.save(model.state_dict(), "best_model.pth")

十、执行入口

if __name__ == "__main__":main(resume=False)  # 首次训练# main(resume=True)  # 恢复训练

十一、关键设计亮点总结

1.维度管理

维度管理：通过permute确保数据形状符合Conv1d要求

2.数据标准化

数据标准化：使用全体训练数据计算均值和方差，避免数据泄露

3.动态学习率

动态学习率：ReduceLROnPlateau根据验证损失自动调整

4.梯度剪裁

梯度裁剪：防止梯度爆炸，稳定训练过程

5.检查点系统

检查点系统：完整保存训练状态，支持训练中断恢复

6.结果可追溯

结果可追溯：带时间戳的CSV记录和模型保存

7.工业级健壮性

工业级健壮性：异常捕获、参数持久化、自动类别映射

8.高效数据加载

高效数据加载：多进程并行加速数据预处理

这个实现涵盖了从数据预处理到模型训练的完整流程，适合工业级时间序列分类任务，具有良好的可扩展性和可维护性。

---