网站运营公司哪家值得推荐线上营销策略都有哪些
设计要求
使用E2PROM完成数据记录功能，单片机复位次数记录到E2PROM的地址0中。每复位一次数值加1，按下按键S4，串口发送复位次数。串口发送格式如下：
Number：1
备注：
单片机IRC振荡器频率设置为12MHz。
按键模式：BTN；扩展方式：IO模式。
串口通信波特率设置为 9600。
代码：
sys.h
#ifndef __SYS_H__
#define __SYS_H__#include <STC15F2K60S2.H>
#include "intrins.h"
sbit scl=P2^0;
sbit sda=P2^1;
extern bit flag_send;//用于标明是否发送数据
extern bit flag_set;//用于标明是否重置数据（非题意）
void init74hc138(unsigned char n);
void init();
void w_eeprom(unsigned char addr,unsigned char date);
unsigned char r_eeprom(unsigned char addr);
void Key_Loop();#endifmain.c
#include "sys.h"
unsigned char eeprom_count=0;//EEPROM中的计数值
unsigned char *str = "Number: ";
bit flag_key=0;
void UartInit(void) //9600bps@12.000MHz
{SCON = 0x50; //8位数据,可变波特率AUXR |= 0x40; //定时器时钟1T模式AUXR &= 0xFE; //串口1选择定时器1为波特率发生器TMOD &= 0x0F; //设置定时器模式TL1 = 0xC7; //设置定时初始值TH1 = 0xFE; //设置定时初始值ET1 = 0; //禁止定时器中断TR1 = 1; //定时器1开始计时ES=1;EA=1;
}
//发送一个字节数据到串口
void send_uart_date(unsigned char date){SBUF=date;while(TI==0);TI=0;
}
//发送字符串到串口
void send_uart_str(unsigned char *str){while(*str!='\0'){send_uart_date(*str++);}
}
//将数字转换为字符串
void num_transt_str(unsigned char num){if(num>=100)send_uart_date(num/100+'0');if(num>=10)send_uart_date((num%100)/10+'0');send_uart_date(num%10+'0');
}
void Timer0_Init(void) //100微秒@12.000MHz
{AUXR |= 0x80; //定时器时钟1T模式TMOD &= 0xF0; //设置定时器模式TL0 = 0x50; //设置定时初始值TH0 = 0xFB; //设置定时初始值TF0 = 0; //清除TF0标志TR0 = 1; //定时器0开始计时ET0 = 1; //使能定时器0中断EA=1;
}
void main(){init();eeprom_count=r_eeprom(0x00);eeprom_count++;w_eeprom(0x00,eeprom_count);UartInit();Timer0_Init();while(1){if(flag_key){flag_key=0;Key_Loop();}if(flag_send){flag_send=0;send_uart_str(str);//发送Number:num_transt_str(eeprom_count);//发送计数器数值send_uart_str("\r\n");//换行}if(flag_set){//重置flag_set=0;eeprom_count=0;w_eeprom(0x00,eeprom_count);}}
}
void uart() interrupt 4
{if(RI){RI=0;}
}
void Timer0_Isr(void) interrupt 1
{static unsigned char count=0;count++;if(count==50){count=0;flag_key=1;}
}sys.c
#include "sys.h"
unsigned char keyval,keyold,keydown,keyup;
bit flag_send=0;
bit flag_set=0;
void init74hc138(unsigned char n){P2=(P2&0x1f)|(n<<5);P2&=0x1f;
}
void init(){P0=0x00;init74hc138(5);P0=0xff;init74hc138(4);
}
void Key_Loop(){keyval=0;if(P33==0)keyval=1;if(P32==0)keyval=2;keydown=keyval&(keyold^keyval);keyup=~keyval&(keyold^keyval);if(keyval==1&&keyold!=keyval)flag_send=1;if(keyval==2&&keyold!=keyval)flag_set=1;keyold=keyval;
}iic.c
#include "sys.h"#define DELAY_TIME 5
static void I2C_Delay(unsigned char n)
{do{_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_(); }while(n--);
}
void I2CStart(void)
{sda = 1;scl = 1;I2C_Delay(DELAY_TIME);sda = 0;I2C_Delay(DELAY_TIME);scl = 0;
}
void I2CStop(void)
{sda = 0;scl = 1;I2C_Delay(DELAY_TIME);sda = 1;I2C_Delay(DELAY_TIME);
}
void I2CSendByte(unsigned char byt)
{unsigned char i;for(i=0; i<8; i++){scl = 0;I2C_Delay(DELAY_TIME);if(byt & 0x80){sda = 1;}else{sda = 0;}I2C_Delay(DELAY_TIME);scl = 1;byt <<= 1;I2C_Delay(DELAY_TIME);}scl = 0;
}
unsigned char I2CReceiveByte(void)
{unsigned char da;unsigned char i;for(i=0;i<8;i++){ scl = 1;I2C_Delay(DELAY_TIME);da <<= 1;if(sda) da |= 0x01;scl = 0;I2C_Delay(DELAY_TIME);}return da;
}
unsigned char I2CWaitAck(void)
{unsigned char ackbit;scl = 1;I2C_Delay(DELAY_TIME);ackbit = sda; scl = 0;I2C_Delay(DELAY_TIME);return ackbit;
}
void I2CSendAck(unsigned char ackbit)
{scl = 0;sda = ackbit; I2C_Delay(DELAY_TIME);scl = 1;I2C_Delay(DELAY_TIME);scl = 0; sda = 1;I2C_Delay(DELAY_TIME);
}
//向EEPROM中写入一个字节数据
void w_eeprom(unsigned char addr,unsigned char date){I2CStart();I2CSendByte(0xa0);I2CWaitAck();I2CSendByte(addr);I2CWaitAck();I2CSendByte(date);I2CWaitAck();I2CStop();
}
//从EEPROM中读取一个字节数据
unsigned char r_eeprom(unsigned char addr){unsigned char temp;I2CStart();I2CSendByte(0xa0);I2CWaitAck();I2CSendByte(addr);I2CWaitAck();I2CStart();I2CSendByte(0xa1);I2CWaitAck();temp=I2CReceiveByte();I2CSendAck(1);I2CStop();return temp;
}测试结果
