公司做网站好seo岗位工资
文章目录
- 查看版本
- 查看网卡名称
- 编辑接口配置
- 配置DNS服务器
- 重启kali服务器
- 启动ssh服务
- 远程登录访问
进行渗透测试时为了更加方便的访问使用kali将kali的IP设置为静态IP。设置步骤如下
查看版本
└─$ uname -a
Linux kali 6.6.9-amd64 #1 SMP PREEMPT_DYNAMIC Kali 6.6.9-1kali1 (2024-01-08) x86_64 GNU/Linux
查看网卡名称
┌──(kali㉿kali)-[~]
└─$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00inet 127.0.0.1/8 scope host lovalid_lft forever preferred_lft foreverinet6 ::1/128 scope host proto kernel_lo valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000link/ether 00:0c:29:d3:19:98 brd ff:ff:ff:ff:ff:ffinet 192.168.126.132/24 brd 192.168.126.255 scope global dynamic noprefixroute eth0valid_lft 1449sec preferred_lft 1449secinet6 fe80::c6ab:f407:db0b:657f/64 scope link noprefixroute valid_lft forever preferred_lft forever
编辑接口配置
Kali Linux 使用 /etc/network/interfaces
增加eth0 网卡的配置 这里直接使用 动态和获取的IP地址
└─$ cat /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).source /etc/network/interfaces.d/*# The loopback network interfaceauto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.126.132
netmask 255.255.255.0
gateway 192.168.126.2
dns-nameservers 192.168.126.2 8.8.8.8
配置DNS服务器
└─$ cat /etc/resolv.conf
# Generated by NetworkManager
search localdomain
nameserver 192.168.126.2
nameserver 8.8.8.8
重启kali服务器
reboot
启动ssh服务
┌──(kali㉿kali)-[~]
└─$ sudo service ssh start
[sudo] password for kali: ┌──(kali㉿kali)-[~]
└─$ netstat -tlunp
(Not all processes could be identified, non-owned process infowill not be shown, you would have to be root to see it all.)
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN -
tcp6 0 0 :::22 :::* LISTEN -
远程登录访问
下载新版putty进行访问
