网站 建设 申请百度快照优化seo

界面如下，丑是丑了点，但主打一个实用。

主要就是通过ping，就是一直在ping，当不通的时候，就根据你设置的报警时间，主要是利用飞书机器人来给飞书指定群里发异常信息报警。

直接上代码

import subprocess
import time
import requests
import threading
import logging
import tkinter as tk
from tkinter import messagebox, simpledialog
import json
import os
import sys# 获取程序所在目录
if getattr(sys, 'frozen', False):  # 如果程序被打包成exePROGRAM_DIR = os.path.dirname(sys.executable)  # 使用exe所在目录
else:  # 如果是脚本运行PROGRAM_DIR = os.path.dirname(os.path.abspath(__file__))  # 使用脚本所在目录# 日志文件路径
LOG_FILE = os.path.join(PROGRAM_DIR, "ip_monitor.log")
CONFIG_FILE = os.path.join(PROGRAM_DIR, "config.json")# 配置日志
logging.basicConfig(level=logging.INFO,format="%(asctime)s - %(levelname)s - %(message)s",handlers=[logging.FileHandler(LOG_FILE, encoding="utf-8"),  # 日志写入文件logging.StreamHandler()  # 日志输出到控制台]
)# 输出日志和配置文件的路径，方便调试
logging.info(f"程序所在目录: {PROGRAM_DIR}")
logging.info(f"日志文件路径: {LOG_FILE}")
logging.info(f"配置文件路径: {CONFIG_FILE}")class IPMonitor:def __init__(self):self.running = Falseself.thread = Noneself.start_time = None  # 记录监控启动时间self.last_normal_notify_time = {}  # 记录每个目标最后一次正常通知的时间def ping_target(self, target, ping_count, ping_size):"""Ping目标（IP或域名），返回是否连通，并在日志中显示详细过程"""try:# 执行Ping命令，捕获输出result = subprocess.run(['ping', '-n', str(ping_count), '-l', str(ping_size), '-w', '1000', target],stdout=subprocess.PIPE,stderr=subprocess.PIPE,text=True,creationflags=subprocess.CREATE_NO_WINDOW  # 隐藏窗口（仅Windows有效）)# 将Ping命令的完整输出写入日志logging.info(f"Ping {target} 过程:\n{result.stdout}")if result.stderr:logging.error(f"Ping {target} 错误:\n{result.stderr}")# 检查输出中是否包含“回复”或“Reply”if "回复" in result.stdout or "Reply" in result.stdout:return Trueelse:return Falseexcept Exception as e:logging.error(f"Ping命令执行错误 {target}: {e}")return Falsedef send_feishu_message(self, webhook_url, message):"""发送飞书群消息"""try:response = requests.post(webhook_url, json={"msg_type": "text", "content": {"text": message}})if response.status_code == 200:logging.info("消息发送成功")else:logging.error(f"消息发送失败: {response.status_code}, {response.text}")except Exception as e:logging.error(f"发送消息错误: {e}")finally:if 'response' in locals():response.close()def monitor_targets(self, target_info_list, webhook_url, monitor_interval, enable_normal_notify, normal_notify_interval, ping_count, ping_size):"""监控目标列表（IP或域名），根据设置发送通知"""while self.running:for target_info in target_info_list:target, comment = target_infoif not self.ping_target(target, ping_count, ping_size):self.send_feishu_message(webhook_url, f"🛑 检测到目标无法访问：{target} ({comment})，请检查！")else:current_time = time.time()# 检查是否启用了正常通知，并且满足时间间隔if enable_normal_notify and (target not in self.last_normal_notify_time or(current_time - self.last_normal_notify_time.get(target, 0)) >= normal_notify_interval * 60):self.send_feishu_message(webhook_url, f"✅ 目标 {target} ({comment}) 正常")self.last_normal_notify_time[target] = current_timelogging.info(f"✅ 目标 {target} ({comment}) 正常")time.sleep(monitor_interval)  # 根据设置的间隔检查def start(self, target_info_list, webhook_url, monitor_interval, enable_normal_notify, normal_notify_interval, ping_count, ping_size):"""启动监控"""if self.running:logging.warning("监控已在运行中")returnself.running = Trueself.start_time = time.time()  # 记录启动时间self.thread = threading.Thread(target=self.monitor_targets,args=(target_info_list, webhook_url, monitor_interval, enable_normal_notify, normal_notify_interval, ping_count, ping_size))self.thread.daemon = True  # 设置为守护线程，主线程退出时自动结束self.thread.start()logging.info("监控已启动")def stop(self):"""停止监控"""self.running = Falseif self.thread:self.thread.join(timeout=1)  # 最多等待1秒让线程退出if self.thread.is_alive():logging.warning("监控线程未能及时退出，强制终止")self.start_time = None  # 清空启动时间logging.info("监控已停止")class IPMonitorGUI:def __init__(self, root):self.root = rootself.root.title("IP和域名监控工具")self.root.geometry("500x600")self.monitor = IPMonitor()# 加载配置文件self.config = self.load_config()# 飞书Webhook地址输入self.label_webhook = tk.Label(root, text="飞书Webhook地址:")self.label_webhook.pack(pady=5)self.button_set_webhook = tk.Button(root, text="设置飞书Webhook地址", command=self.set_webhook)self.button_set_webhook.pack(pady=5)# 目标（IP或域名）输入框（带滚动条）self.label_target = tk.Label(root, text="需要监控的目标（每行一个，格式：IP/域名 | 备注）:")self.label_target.pack(pady=5)self.frame_target = tk.Frame(root)self.frame_target.pack(pady=5)self.text_target = tk.Text(self.frame_target, height=10, width=50)self.text_target.pack(side=tk.LEFT, fill=tk.BOTH)self.scroll_target = tk.Scrollbar(self.frame_target, command=self.text_target.yview)self.scroll_target.pack(side=tk.RIGHT, fill=tk.Y)self.text_target.config(yscrollcommand=self.scroll_target.set)if "target_info_list" in self.config:self.text_target.insert(tk.END, "\n".join([" | ".join(info) for info in self.config["target_info_list"]]))# Ping包次数设置self.label_ping_count = tk.Label(root, text="Ping包次数:")self.label_ping_count.pack(pady=5)self.entry_ping_count = tk.Entry(root)self.entry_ping_count.pack(pady=5)self.entry_ping_count.insert(0, str(self.config.get("ping_count", 1)))# Ping包大小设置self.label_ping_size = tk.Label(root, text="Ping包大小（字节）:")self.label_ping_size.pack(pady=5)self.entry_ping_size = tk.Entry(root)self.entry_ping_size.pack(pady=5)self.entry_ping_size.insert(0, str(self.config.get("ping_size", 32)))# 报警时间间隔设置self.label_monitor_interval = tk.Label(root, text="报警时间间隔（秒）:")self.label_monitor_interval.pack(pady=5)self.entry_monitor_interval = tk.Entry(root)self.entry_monitor_interval.pack(pady=5)self.entry_monitor_interval.insert(0, str(self.config.get("monitor_interval", 30)))# 正常通知开关self.enable_normal_notify = tk.BooleanVar(value=self.config.get("enable_normal_notify", False))self.check_normal_notify = tk.Checkbutton(root, text="启用正常通知", variable=self.enable_normal_notify)self.check_normal_notify.pack(pady=5)# 正常通知时间间隔设置self.label_normal_notify_interval = tk.Label(root, text="正常通知时间间隔（分钟）:")self.label_normal_notify_interval.pack(pady=5)self.entry_normal_notify_interval = tk.Entry(root)self.entry_normal_notify_interval.pack(pady=5)self.entry_normal_notify_interval.insert(0, str(self.config.get("normal_notify_interval", 5)))# 按钮区域self.button_frame = tk.Frame(root)self.button_frame.pack(pady=10)self.button_start = tk.Button(self.button_frame, text="开始监控", command=self.start_monitor)self.button_start.pack(side=tk.LEFT, padx=10)self.button_stop = tk.Button(self.button_frame, text="停止监控", command=self.stop_monitor)self.button_stop.pack(side=tk.LEFT, padx=10)self.button_stop.config(state=tk.DISABLED)  # 初始禁用停止按钮# 日志显示区域self.label_log = tk.Label(root, text="日志:")self.label_log.pack(pady=5)self.text_log = tk.Text(root, height=10, width=60)self.text_log.pack(pady=5)# 绑定窗口关闭事件self.root.protocol("WM_DELETE_WINDOW", self.on_closing)def set_webhook(self):"""设置飞书Webhook地址"""webhook_url = simpledialog.askstring("设置飞书Webhook地址", "请输入飞书Webhook地址:")if webhook_url:self.config["webhook_url"] = webhook_urlself.save_config()def load_config(self):"""加载配置文件"""try:if os.path.exists(CONFIG_FILE):with open(CONFIG_FILE, "r", encoding="utf-8") as f:return json.load(f)except Exception as e:logging.error(f"加载配置文件失败: {e}")return {}def save_config(self):"""保存配置文件"""try:# 获取当前目标列表target_info_list = []for line in self.text_target.get("1.0", tk.END).strip().splitlines():if "|" in line:target, comment = map(str.strip, line.split("|", 1))target_info_list.append((target, comment))else:target_info_list.append((line.strip(), "无备注"))self.config["target_info_list"] = target_info_list# 保存其他设置self.config["ping_count"] = int(self.entry_ping_count.get())self.config["ping_size"] = int(self.entry_ping_size.get())self.config["monitor_interval"] = int(self.entry_monitor_interval.get())self.config["enable_normal_notify"] = self.enable_normal_notify.get()self.config["normal_notify_interval"] = int(self.entry_normal_notify_interval.get())with open(CONFIG_FILE, "w", encoding="utf-8") as f:json.dump(self.config, f, ensure_ascii=False, indent=4)logging.info("配置文件已保存")except Exception as e:logging.error(f"保存配置文件失败: {e}")def start_monitor(self):"""启动监控"""webhook_url = self.config.get("webhook_url", "").strip()target_info_list = []for line in self.text_target.get("1.0", tk.END).strip().splitlines():if "|" in line:target, comment = map(str.strip, line.split("|", 1))target_info_list.append((target, comment))else:target_info_list.append((line.strip(), "无备注"))if not webhook_url or not target_info_list:messagebox.showerror("错误", "请设置飞书Webhook地址和填写需要监控的目标！")returntry:ping_count = int(self.entry_ping_count.get())ping_size = int(self.entry_ping_size.get())monitor_interval = int(self.entry_monitor_interval.get())normal_notify_interval = int(self.entry_normal_notify_interval.get())except ValueError:messagebox.showerror("错误", "Ping包次数、Ping包大小和时间间隔必须为整数！")returnself.monitor.start(target_info_list,webhook_url,monitor_interval,self.enable_normal_notify.get(),normal_notify_interval,ping_count,ping_size)self.button_start.config(state=tk.DISABLED)self.button_stop.config(state=tk.NORMAL)self.log("监控已启动")# 保存配置self.save_config()def stop_monitor(self):"""停止监控"""self.monitor.stop()self.button_start.config(state=tk.NORMAL)self.button_stop.config(state=tk.DISABLED)self.log("监控已停止")def log(self, message):"""在日志区域显示消息"""self.text_log.insert(tk.END, message + "\n")self.text_log.see(tk.END)def on_closing(self):"""窗口关闭时确保监控停止"""if self.monitor.running:self.monitor.stop()self.root.destroy()# 启动GUI
if __name__ == "__main__":root = tk.Tk()app = IPMonitorGUI(root)root.mainloop()

直接打包即可使用。打包命令

pyinstaller --onefile --windowed 12.py