建设收费网站企业seo外包公司

本节定义EFI_LOADED_IMAGE_PROTOCOL和 EFI_LOADED_IMAGE_DEVICE_PATH_PROTOCOL。这些协议分别描述了已加载到内存中的映像，并指定了PE/COFF映像通过EFI引导服务LoadImage()加载 时使用的设备路径。这些描述包括 load image 的源、映像在内存中的当前位置、为image分配的内存类型、 以及在调用image时传递给image的参数。

9.1 EFI Loaded Image Protocol

被 image handle 使用，用于获取加载的 Image 的信息。

///
/// Can be used on any image handle to obtain information about the loaded image.
///
typedef struct {UINT32                      Revision;     ///< Defines the revision of the EFI_LOADED_IMAGE_PROTOCOL structure.///< All future revisions will be backward compatible to the current revision.EFI_HANDLE                  ParentHandle; ///< Parent image's image handle. NULL if the image is loaded directly from///< the firmware's boot manager.EFI_SYSTEM_TABLE            *SystemTable; ///< the image's EFI system table pointer.//// Source location of image//EFI_HANDLE                  DeviceHandle; ///< The device handle that the EFI Image was loaded from.EFI_DEVICE_PATH_PROTOCOL    *FilePath;    ///< A pointer to the file path portion specific to DeviceHandle///< that the EFI Image was loaded from.VOID                        *Reserved;    ///< Reserved. DO NOT USE.//// Images load options//UINT32                      LoadOptionsSize; ///< The size in bytes of LoadOptions.VOID                        *LoadOptions;    ///< A pointer to the image's binary load options.//// Location of where image was loaded//VOID                        *ImageBase;    ///< The base address at which the image was loaded.UINT64                      ImageSize;     ///< The size in bytes of the loaded image.EFI_MEMORY_TYPE             ImageCodeType; ///< The memory type that the code sections were loaded as.EFI_MEMORY_TYPE             ImageDataType; ///< The memory type that the data sections were loaded as.EFI_IMAGE_UNLOAD            Unload;
} EFI_LOADED_IMAGE_PROTOCOL;

这个EFI_LOADED_IMAGE_PROTOCOL 是在需要加载 Image 的 driver 来 install，拿 SMM driver 来举例：

在 SMM driver entry 里面会来填充对应 image 的相关信息，包括 image 的地址。

9.2 EFI Loaded Image Device Path Protocol

安装后，Loaded Image Device Path Protocol 指定通过EFI引导服务LoadImage（）加载 PE/COFF映像时使用的设备路径。Loaded Image Device Path Protocol 使用与第 10 章中定义的Device Path Protocol 相同的协议接口结构，只有 GUIID 不同。

Loaded Image Device Path Protocol 必须安装到EFI引导服务loadimage（）加载的PE/COFF映像的映像句柄上。

在 Boot service-->loadimage 加载 image 之前需要将这个 device patch 复制到Boot service-->loadimage；

typedef struct {UINT8    Type;    ///< 0x01 Hardware Device Path.///< 0x02 ACPI Device Path.///< 0x03 Messaging Device Path.///< 0x04 Media Device Path.///< 0x05 BIOS Boot Specification Device Path.///< 0x7F End of Hardware Device Path.UINT8    SubType; ///< Varies by Type///< 0xFF End Entire Device Path, or///< 0x01 End This Instance of a Device Path and start a new///< Device Path.UINT8    Length[2]; ///< Specific Device Path data. Type and Sub-Type define///< type of data. Size of data is included in Length.
} EFI_DEVICE_PATH_PROTOCOL;