当前位置： 首页 > wzjs >正文

惠州网站建设电话网络媒体

wzjs 2025/8/4 23:29:58
惠州网站建设电话,网络媒体,周口市做网站,军事国际形势最新消息1.开发板配置 本人开发板使用ESP32S3-wroom1-n16r8最小系统板 由于基于vscode与PlatformIO框架开发，无espidf框架，因此无法直接烧录程序，配置开发板参数如下： 在platformio.ini文件中，配置使用esp32-s3-devkitc-1开发…

1.开发板配置

本人开发板使用ESP32S3-wroom1-n16r8最小系统板

由于基于vscode与PlatformIO框架开发，无espidf框架，因此无法直接烧录程序，配置开发板参数如下：

在platformio.ini文件中，配置使用esp32-s3-devkitc-1开发板型号，自行指定flash和psram运行模式，启用psram并指定大小，开启串口调试即可

[env:esp32s3_wroom]
platform = espressif32
board = esp32-s3-devkitc-1  ; 使用N16版本的板型
framework = arduinoboard_build.arduino.partitions = default_16MB.csv
; 指定FLASH和PSRAM的运行模式
board_build.arduino.memory_type = qio_opi
; 指定FLASH容量为16MB
board_upload.flash_size = 16MB
upload_speed = 921600
upload_port = COM17      ; 根据实际端口修改
monitor_speed = 115200
build_flags = -DBOARD_HAS_PSRAM   ; 启用PSRAM-DPSRAM_SIZE=8      ; 指定8MB PSRAM-DARDUINO_USB_MODE=1              ；开启串口调试-DARDUINO_USB_CDC_ON_BOOT=1-DARDUINO_RUNNING_CORE=1-DARDUINO_EVENT_RUNNING_CORE=1lib_deps = bodmer/TFT_eSPI@^2.5.43moononournation/GFX Library for Arduino@^1.5.4

主要博文：VS Code+platformio配置ESP32-S3-N16R8（8MB PSRAM + 16MB FLASH）工程 - Macrored - 博客园

2.安装GFX显示屏库

直接搜索gfx下滑即可，选择加入到工程文件中

 之后选择自己的工程文件夹添加即可

3.修改配置文件

打开该目录，基于个人开发板可能文件目录不同，将PDQ文件夹下所有h文件复制到主文件夹下（main.cpp同级目录）

 

4.之后修改其中两个文件，开启esp32s3 rgb配置

5.修改配置引脚

在第四步同一文件夹下，修改配置spi引脚

之后根据自身显示屏尺寸外形，选择对应rgb引脚配置函数，我使用的为2寸方形屏幕，因此使用option4

之后根据实际硬件接线，修改该函数下引脚配置

 Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(13 /* DE */, 12 /* VSYNC */, 11 /* HSYNC */, 14 /* PCLK */,10 /* R0 */, 9 /* R1 */, 8 /* R2 */, 7 /* R3 */, 6 /* R4 */,5 /* G0 */, 4 /* G1 */, 3 /* G2 */, 2 /* G3 */, 1 /* G4 */, 17 /* G5 */,40 /* B0 */, 39 /* B1 */, 38 /* B2 */, 47 /* B3 */, 45 /* B4 */,1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);Arduino_RGB_Display *gfx = new Arduino_RGB_Display(480 /* width */, 640 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,bus, GFX_NOT_DEFINED /* RST */, st7701_type11_init_operations, sizeof(st7701_type11_init_operations));

 

屏幕引脚序号屏幕引脚定义esp32s3引脚序号
1leda3.3引脚可拉高
2ledkgnd
3vcc3.3拉高
4gnggnd
5gnggnd
6gnggnd
7gnggnd
8gnggnd
9gnggnd
10gnggnd
11gnggnd
12gnggnd
13gnggnd
14vs12
15hs11
16pclk14
17de13
18b040
19b139
20b238
21b347
22b445
23g05
24g14
25g23
26g32
27g41
28g517
29r010
30r19
31r28
32r37
33r46
34rest46（屏幕初始化）19引脚不可用
35cs15
36scl16
37sda21
38gndgnd
39vcc3.3拉高
     3.3拉高引脚20 19 18

此时特别注意屏幕中RESET引脚，后续修改屏幕底层驱动时，不同厂家屏幕，屏幕底层驱动初始化需要RESET引脚电平触发。

6.修改屏幕分辨率

根据自身购买屏幕分辨率，修改对应参数

7.修改屏幕初始化函数（需要商家提供资料）

打开屏幕初始化函数

根据自身屏幕驱动资料，修改对应寄存器配置内容（该函数中不可调用延时等函数，用宏定义即可），商家屏幕部分驱动资料：

RST即为屏幕的RESET引脚，如需配置电平初始化，在屏幕启动函数之前单独配置电平即可，延时函数推荐使用微秒级延时函数。

之后根据商家资料，更改每个指令中寄存器配置内容，注意com与dat不同函数区别。

main.cpp中，step函数配置RESET引脚即可 

8.配置主函数

主函数中配置对应指令，烧录程序即可。

9.注意事项

1.打开开发板的PSRAM功能并配置

2.如果出现竖状彩色条纹花屏，检查以下配置内容：

  显示屏初始化函数 st7701_type11_init_operations

  显示屏底层驱动中寄存器配置

  显示屏分辨率，引脚配置

  显示屏初始化引脚RESET引脚

3.注意显示屏模式rgb656还是rgb888，涉及显示屏初始化驱动函数内容修改

10.附上相关文件代码

main.cpp

#include <Arduino_GFX_Library.h>
#include <Arduino_GFX_dev_device.h>
/*
#include <Arduino_DataBus.h>
#include <Arduino_G.h>
#include <Arduino_GFX.h>
#include <Arduino_TFT.h>
#include <Arduino_TFT_18bit.h>
#include <YCbCr2RGB.h>
#include <gfxfont.h>
*/// 使用extern声明外部变量
//extern Arduino_DataBus *bus;          // 声明外部数据总线
//extern Arduino_ESP32RGBPanel *rgbpanel; // 声明外部RGB面板
//extern Arduino_RGB_Display *gfx;      // 声明外部RGB显示对象const int RESET=46;   //定义屏幕复位引脚，涉及屏幕初始化     
void setup() {Serial.begin(115200);Serial.println("ESP32-S3 启动");Serial.println("初始化GPIO引脚...");pinMode(20, OUTPUT);    pinMode(18, OUTPUT); pinMode(48, OUTPUT); digitalWrite(20, HIGH);digitalWrite(18, HIGH);digitalWrite(48,HIGH);Serial.println("GPIO引脚初始化完成");Serial.println("开始初始化显示屏...");//显示屏初始化 RST引脚配置pinMode(RESET, OUTPUT);digitalWrite(RESET, HIGH);    delayMicroseconds(1000);		digitalWrite(RESET, LOW);  delayMicroseconds(5000);digitalWrite(RESET, HIGH);  delayMicroseconds(50000);if (!gfx->begin()) {Serial.println("显示屏初始化失败!");} else {Serial.println("显示屏初始化成功!");}// 初始化显示gfx->fillScreen(WHITE);delay(1000);
}void loop() {gfx->fillScreen(RED);delay(1000);gfx->fillScreen(GREEN);delay(1000);gfx->fillScreen(BLUE);delay(1000);gfx->drawCircle(250, 250, 50, RED);  Serial.println("ok");  // 在屏幕中心画圆delay(1000);/* gfx->fillCircle(240, 240, 40, GREEN);  // 填充圆delay(1000);gfx->drawRect(190, 190, 100, 100, BLUE); // 画矩形delay(1000); */
}

platformIO.ini


[env:esp32s3_wroom]
platform = espressif32
board = esp32-s3-devkitc-1  ; 使用N16版本的板型
framework = arduinoboard_build.arduino.partitions = default_16MB.csv
; 指定FLASH和PSRAM的运行模式
board_build.arduino.memory_type = qio_opi
; 指定FLASH容量为16MB
board_upload.flash_size = 16MB
upload_speed = 921600
upload_port = COM17      ; 根据实际端口修改
monitor_speed = 115200
build_flags = -DBOARD_HAS_PSRAM   ; 启用PSRAM-DPSRAM_SIZE=8      ; 指定8MB PSRAM-DARDUINO_USB_MODE=1-DARDUINO_USB_CDC_ON_BOOT=1-DARDUINO_RUNNING_CORE=1-DARDUINO_EVENT_RUNNING_CORE=1lib_deps = bodmer/TFT_eSPI@^2.5.43moononournation/GFX Library for Arduino@^1.5.4

  屏幕初始化底层驱动函数（Arduino_RGB_Display.h文件中）

static const uint8_t st7701_type11_init_operations[] = {BEGIN_WRITE,WRITE_COMMAND_8, 0xFF,WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x13,WRITE_COMMAND_8, 0xEF,WRITE_BYTES, 1, 0x08,WRITE_COMMAND_8, 0xFF,WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x10,WRITE_C8_D16, 0xC0, 0x4F, 0x00,WRITE_C8_D16, 0xC1, 0x11, 0x0C,WRITE_C8_D16, 0xC2, 0x07, 0x0A,WRITE_COMMAND_8, 0xC3,WRITE_BYTES, 3, 0x83, 0x33, 0x1B,//WRITE_C8_D8, 0xCC, 0x10, // changed by manufactureWRITE_COMMAND_8, 0xB0, // Positive Voltage Gamma ControlWRITE_BYTES, 16,0x00, 0x0F, 0x18, 0x0D,0x12, 0x07, 0x05, 0x08,0x07, 0x21, 0x30, 0x10,0x0F, 0x26, 0x2F, 0x1F,WRITE_COMMAND_8, 0xB1, // Negative Voltage Gamma ControlWRITE_BYTES, 16,0x00, 0x1B, 0x20, 0x0C,0x0E, 0x03, 0x08, 0x08,0x08, 0x22, 0x05, 0x11,0x0F, 0x2A, 0x32, 0x1F,// PAGE1WRITE_COMMAND_8, 0xFF,WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x11,WRITE_C8_D8, 0xB0, 0x35, // Vop=4.7375vWRITE_C8_D8, 0xB1, 0x52, // VCOM=32WRITE_C8_D8, 0xB2, 0x81, // VGH=15vWRITE_C8_D8, 0xB3, 0x80,WRITE_C8_D8, 0xB5, 0x4E, // VGL=-10.17vWRITE_C8_D8, 0xB7, 0x85,WRITE_C8_D8, 0xB8, 0x21, // AVDD=6.6 & AVCL=-4.6WRITE_C8_D8, 0xC0, 0x09,WRITE_C8_D8, 0xC1, 0x78,WRITE_C8_D8, 0xC2, 0x78,WRITE_C8_D8, 0xD0, 0x88,WRITE_COMMAND_8, 0xE0,WRITE_BYTES, 3, 0x00, 0xA0, 0x02,WRITE_COMMAND_8, 0xE1,WRITE_BYTES, 11,0x06, 0xA0, 0x08, 0xA0,0x05, 0xA0, 0x07, 0xA0,0x00, 0x44, 0x44,WRITE_COMMAND_8, 0xE2,WRITE_BYTES, 13,0x20, 0x20, 0x40, 0x40,0x96, 0xA0, 0x00, 0x00,0x96, 0xA0, 0x00, 0x00,0x00,WRITE_COMMAND_8, 0xE3,WRITE_BYTES, 4, 0x00, 0x00, 0x22, 0x22,WRITE_C8_D16, 0xE4, 0x44, 0x44,WRITE_COMMAND_8, 0xE5,WRITE_BYTES, 16,0x0E, 0x97, 0x10, 0xA0,0x10, 0x99, 0x10, 0xA0,0x0A, 0x93, 0x10, 0xA0,0x0C, 0x95, 0x10, 0xA0,WRITE_COMMAND_8, 0xE6,WRITE_BYTES, 4, 0x00, 0x00, 0x22, 0x22,WRITE_C8_D16, 0xE7, 0x44, 0x44,WRITE_COMMAND_8, 0xE8,WRITE_BYTES, 16,0x0D, 0x96, 0x10, 0xA0,0x0F, 0x98, 0x10, 0xA0,0x09, 0x92, 0x10, 0xA0,0x0B, 0x94, 0x10, 0xA0,WRITE_COMMAND_8, 0xEB,WRITE_BYTES, 7,0x00, 0x01, 0x4E, 0x4E,0x44, 0x88, 0x40,WRITE_C8_D16, 0xEC, 0x78, 0x00,WRITE_COMMAND_8, 0xED,WRITE_BYTES, 16,0xFF, 0xFA, 0x2F, 0x89,0x76, 0x54, 0x01, 0xFF,0xFF, 0x10, 0x45, 0x67,0x98, 0xF2, 0xAF, 0xFF,//-----------VAP & VAN---------------WRITE_COMMAND_8, 0xEF,WRITE_BYTES, 6, 0x08, 0x08, 0x08, 0x45, 0x3F,0x54,WRITE_COMMAND_8, 0xFF,WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x13,WRITE_COMMAND_8, 0xE8,WRITE_BYTES, 8, 0x00, 0x0E, 0xFF, 0x77, 0x01, 0x00, 0x00, 0x00,WRITE_COMMAND_8, 0x11,// Sleep OutEND_WRITE,DELAY, 120,BEGIN_WRITE,WRITE_COMMAND_8, 0xFF,WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x13,WRITE_COMMAND_8, 0xE8,WRITE_BYTES, 2, 0x00, 0x0C,END_WRITE,DELAY, 10,BEGIN_WRITE,WRITE_COMMAND_8, 0xE8,WRITE_BYTES, 2, 0x00, 0x00,WRITE_COMMAND_8, 0xFF,WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x00,WRITE_COMMAND_8, 0x3A,WRITE_BYTES, 1, 0x55,     // RGB565// WRITE_BYTES, 1, 0x77,     // RGB888WRITE_COMMAND_8, 0x29, // Display OnWRITE_BYTES, 1, 0x00,END_WRITE};// Init code for 480x480 round TL021WVC02 display
static const uint8_t TL021WVC02_init_operations[] = {BEGIN_WRITE,WRITE_COMMAND_8, 0xFF,WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x10,WRITE_C8_D16, 0xC0, 0x3B, 0x00,WRITE_C8_D16, 0xC1, 0x0B, 0x02, // VBPWRITE_C8_D16, 0xC2, 0x00, 0x02,WRITE_C8_D8, 0xCC, 0x10,WRITE_C8_D8, 0xCD, 0x08,WRITE_COMMAND_8, 0xB0, // Positive Voltage Gamma ControlWRITE_BYTES, 16,0x02, 0x13, 0x1B, 0x0D,0x10, 0x05, 0x08, 0x07,0x07, 0x24, 0x04, 0x11,0x0E, 0x2C, 0x33, 0x1D,WRITE_COMMAND_8, 0xB1, // Negative Voltage Gamma ControlWRITE_BYTES, 16,0x05, 0x13, 0x1B, 0x0D,0x11, 0x05, 0x08, 0x07,0x07, 0x24, 0x04, 0x11,0x0E, 0x2C, 0x33, 0x1D,WRITE_COMMAND_8, 0xFF,WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x11,WRITE_C8_D8, 0xB0, 0x5d, // 5dWRITE_C8_D8, 0xB1, 0x43, // VCOM amplitude settingWRITE_C8_D8, 0xB2, 0x81, // VGH Voltage setting, 12VWRITE_C8_D8, 0xB3, 0x80,WRITE_C8_D8, 0xB5, 0x43, // VGL Voltage setting, -8.3VWRITE_C8_D8, 0xB7, 0x85,WRITE_C8_D8, 0xB8, 0x20,WRITE_C8_D8, 0xC1, 0x78,WRITE_C8_D8, 0xC2, 0x78,WRITE_C8_D8, 0xD0, 0x88,WRITE_COMMAND_8, 0xE0,WRITE_BYTES, 3, 0x00, 0x00, 0x02,WRITE_COMMAND_8, 0xE1,WRITE_BYTES, 11,0x03, 0xA0, 0x00, 0x00,0x04, 0xA0, 0x00, 0x00,0x00, 0x20, 0x20,WRITE_COMMAND_8, 0xE2,WRITE_BYTES, 13,0x00, 0x00, 0x00, 0x00,0x00, 0x00, 0x00, 0x00,0x00, 0x00, 0x00, 0x00,0x00,WRITE_COMMAND_8, 0xE3,WRITE_BYTES, 4, 0x00, 0x00, 0x11, 0x00,WRITE_C8_D16, 0xE4, 0x22, 0x00,WRITE_COMMAND_8, 0xE5,WRITE_BYTES, 16,0x05, 0xEC, 0xA0, 0xA0,0x07, 0xEE, 0xA0, 0xA0,0x00, 0x00, 0x00, 0x00,0x00, 0x00, 0x00, 0x00,WRITE_COMMAND_8, 0xE6,WRITE_BYTES, 4, 0x00, 0x00, 0x11, 0x00,WRITE_C8_D16, 0xE7, 0x22, 0x00,WRITE_COMMAND_8, 0xE8,WRITE_BYTES, 16,0x06, 0xED, 0xA0, 0xA0,0x08, 0xEF, 0xA0, 0xA0,0x00, 0x00, 0x00, 0x00,0x00, 0x00, 0x00, 0x00,WRITE_COMMAND_8, 0xEB,WRITE_BYTES, 7,0x00, 0x00, 0x40, 0x40,0x00, 0x00, 0x00,WRITE_COMMAND_8, 0xED,WRITE_BYTES, 16,0xFF, 0xFF, 0xFF, 0xBA,0x0A, 0xBF, 0x45, 0xFF,0xFF, 0x54, 0xFB, 0xA0,0xAB, 0xFF, 0xFF, 0xFF,WRITE_COMMAND_8, 0xEF,WRITE_BYTES, 6,0x10, 0x0D, 0x04, 0x08,0x3F, 0x1F,WRITE_COMMAND_8, 0xFF,WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x13,WRITE_C8_D8, 0xEF, 0x08,WRITE_COMMAND_8, 0xFF,WRITE_BYTES, 5, 0x77, 0x01, 0x00, 0x00, 0x00,WRITE_C8_D8, 0x36, 0x00,WRITE_C8_D8, 0x3A, 0x60, // 0x70 RGB888, 0x60 RGB666, 0x50 RGB565WRITE_COMMAND_8, 0x11, // Sleep OutEND_WRITE,DELAY, 100,BEGIN_WRITE,WRITE_COMMAND_8, 0x29, // Display OnEND_WRITE,DELAY, 50};

Arduino-GFX-dev-devich.h文件

// #define AD35_S3
// #define BLOCKCODELAB_ARCADE_LITE
// #define DLC35010R // or called "Elecrow ESP Terminal with 3.5inch Parallel RGB Capacitive Touch Display (ILI9488)"
// #define DRAGON_RADAR
// #define ESP32_1732S019
// #define ESP32_2424012
// #define ESP32_2432S028
// #define ESP32_3248S035
// #define ESP32_4827A043 /* requires manual set bus speed to 8 mHz: gfx->begin(8000000) */
// #define ESP32_4827A043_QSPI
// #define ESP32_4827S043
// #define ESP32_4848S040_86BOX_GUITION
// #define ESP32_8048S043
// #define ESP32_8048S070
// #define ESP32_LCDKIT_SPI
// #define ESP32_LCDKIT_PAR8A
// #define ESP32_LCDKIT_PAR8B
// #define ESP32_LCDKIT_PAR16
// #define ESP32_S3_313LCD
// #define ESP32_S3_BOX_3
// #define ESP32_S3_EYE#define ESP32_S3_RGB
// #define ESP32_S3_RPI_DPI
// #define ESP32S3_2_1_TP
// #define GS_T3E // Golden Security GS-T3E
// #define IBUBLY
// #define JC1060P470
// #define JC3248W535
// #define JC3636W518
// #define LILYGO_T_DECK
// #define LILYGO_T_DECK_PLUS
// #define LILYGO_T_DISPLAY
// #define LILYGO_T_DISPLAY_S3
// #define LILYGO_T_Display_S3_AMOLED
// #define LILYGO_T_Display_S3_AMOLED_1_64
// #define LILYGO_T_Display_S3_LONG
// #define LILYGO_T_DISPLAY_S3_PRO
// #define LILYGO_T_QT
// #define LILYGO_T_RGB
// #define LILYGO_T_TRACK
// #define LILYGO_T_WATCH_2021
// #define LILYGO_T4_S3
// #define MAKERFABS_TFT_TOUCH_3_5
// #define MAKERFABS_ESP32_S3_TFT_4_0
// #define MAKERFABS_ESP32_S3_TFT_4_3_v1_3
// #define WT32_SC01
// #define XIAO_SAMD21_ROUND_DISPLAY
// #define XIAO_ESP32C3_ROUND_DISPLAY
// #define XIAO_ESP32S3_ROUND_DISPLAY
// #define WAVESHARE_ESP32_S3_LCD_2_8
// #define WAVESHARE_RP2040_LCD_0_96
// #define WZ8048C050 // or called "Elecrow Wizee-ESP32"
// #define ZX2D10GE10R_V4848
// #define ZX3D50CE02S // or called "WT32-SC01 PLUS"
// #define ZX3D95CE01S_AR
// #define ZX3D95CE01S_TR
// #define ZX7D00CE01S // or called "QM Smart Panlee 7.0 inch serial screen"#if defined(AD35_S3)
#define GFX_DEV_DEVICE AD35_S3
#include <Wire.h>
#include <Adafruit_AW9523.h>
Adafruit_AW9523 aw;
#define DEV_DEVICE_INIT()                     \{                                           \Wire.begin(6 /* SDA */, 5 /* SCL */);     \aw.begin(0x59);                           \aw.pinMode(8, OUTPUT);     /* LCD_LEDK */ \aw.pinMode(9, OUTPUT);     /* LCD_LEDK */ \aw.pinMode(10, OUTPUT);    /* LCD_LEDK */ \aw.pinMode(11, OUTPUT);    /* LCD_LEDK */ \aw.pinMode(14, OUTPUT);    /* LCD_RST */  \aw.digitalWrite(8, LOW);   /* LCD_LEDK */ \aw.digitalWrite(9, LOW);   /* LCD_LEDK */ \aw.digitalWrite(10, LOW);  /* LCD_LEDK */ \aw.digitalWrite(11, LOW);  /* LCD_LEDK */ \aw.digitalWrite(14, HIGH); /* LCD_RST */  \}
Arduino_DataBus *bus = new Arduino_ESP32LCD8(45 /* DC */, GFX_NOT_DEFINED /* CS */, 10 /* WR */, GFX_NOT_DEFINED /* RD */,9 /* D0 */, 4 /* D1 */, 3 /* D2 */, 8 /* D3 */, 18 /* D4 */, 17 /* D5 */, 16 /* D6 */, 15 /* D7 */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);#elif defined(BLOCKCODELAB_ARCADE_LITE)
#define GFX_DEV_DEVICE BLOCKCODELAB_ARCADE_LITE
#define GFX_BL 21
Arduino_DataBus *bus = new Arduino_ESP32SPI(45 /* DC */, 10 /* CS */, 12 /* SCK */, 11 /* MOSI */, GFX_NOT_DEFINED /* MISO */, HSPI /* spi_num */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, 46 /* RST */, 3 /* rotation */, false /* IPS */);#elif defined(DLC35010R)
#define GFX_DEV_DEVICE DLC35010R
#define GFX_BL 46
Arduino_DataBus *bus = new Arduino_ESP32PAR16(45 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, 48 /* RD */,47 /* D0 */, 21 /* D1 */, 14 /* D2 */, 13 /* D3 */, 12 /* D4 */, 11 /* D5 */, 10 /* D6 */, 9 /* D7 */,3 /* D8 */, 8 /* D9 */, 16 /* D10 */, 15 /* D11 */, 7 /* D12 */, 6 /* D13 */, 5 /* D14 */, 4 /* D15 */);
Arduino_GFX *gfx = new Arduino_ILI9488(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, false /* IPS */);#elif defined(DRAGON_RADAR)
#define GFX_DEV_DEVICE DRAGON_RADAR
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(GFX_NOT_DEFINED /* DC */, 39 /* CS */,48 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,11 /* R0 */, 12 /* R1 */, 13 /* R2 */, 45 /* R3 */, 0 /* R4 */,8 /* G0 */, 19 /* G1 */, 20 /* G2 */, 46 /* G3 */, 9 /* G4 */, 10 /* G5 */,4 /* B0 */, 5 /* B1 */, 6 /* B2 */, 7 /* B3 */, 15 /* B4 */,1 /* hsync_polarity */, 50 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 30 /* hsync_back_porch */,1 /* vsync_polarity */, 20 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 30 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,bus, GFX_NOT_DEFINED /* RST */, st7701_type6_init_operations, sizeof(st7701_type6_init_operations));#elif defined(ESP32_1732S019)
#define GFX_DEV_DEVICE ESP32_1732S019
#define GFX_BL 14
Arduino_DataBus *bus = new Arduino_ESP32SPI(11 /* DC */, 10 /* CS */, 12 /* SCK */, 13 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 1 /* RST */, 0 /* rotation */, true /* IPS */, 170 /* width */, 320 /* height */, 35 /* col offset 1 */, 0 /* row offset 1 */, 35 /* col offset 2 */, 0 /* row offset 2 */);#elif defined(ESP32_2424012)
#define GFX_DEV_DEVICE ESP32_2424012
#define GFX_BL 8
Arduino_DataBus *bus = new Arduino_ESP32SPI(2 /* DC */, 10 /* CS */, 6 /* SCK */, 7 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);#elif defined(ESP32_2432S028)
#define GFX_DEV_DEVICE ESP32_2432S028
#define GFX_BL 21
Arduino_DataBus *bus = new Arduino_ESP32SPI(2 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, 12 /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */);#elif defined(ESP32_3248S035)
#define GFX_DEV_DEVICE ESP32_3248S035
#define GFX_BL 27
Arduino_DataBus *bus = new Arduino_ESP32SPI(2 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, 12 /* MISO */, VSPI /* spi_num */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */);#elif defined(ESP32_4827A043)
#define GFX_DEV_DEVICE ESP32_4827A043
#define GFX_BL 2
Arduino_DataBus *bus = new Arduino_ESP32LCD16(48 /* DC */, 45 /* CS */, 47 /* WR */, 21 /* RD */,5 /* D0 */, 6 /* D1 */, 7 /* D2 */, 15 /* D3 */, 16 /* D4 */, 4 /* D5 */, 8 /* D6 */, 3 /* D7 */,46 /* D8 */, 9 /* D9 */, 1 /* D10 */, 42 /* D11 */, 39 /* D12 */, 41 /* D13 */, 40 /* D14 */, 14 /* D15 */);
Arduino_GFX *gfx = new Arduino_NV3041A(bus, 17 /* RST */, 0 /* rotation */, true /* IPS */);#elif defined(ESP32_4827A043_QSPI)
#define GFX_DEV_DEVICE ESP32_4827A043_QSPI
#define GFX_BL 1
Arduino_DataBus *bus = new Arduino_ESP32QSPI(45 /* CS */, 47 /* SCK */, 21 /* D0 */, 48 /* D1 */, 40 /* D2 */, 39 /* D3 */);
Arduino_GFX *gfx = new Arduino_NV3041A(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);#elif defined(ESP32_4827S043)
#define GFX_DEV_DEVICE ESP32_4827S043
#define GFX_BL 2
#define RGB_PANEL
// option 1:
// Uncomment for ILI6485 LCD 480x272
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,0 /* hsync_polarity */, 1 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 43 /* hsync_back_porch */,0 /* vsync_polarity */, 3 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 12 /* vsync_back_porch */,1 /* pclk_active_neg */, 10000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(480 /* width */, 272 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
// option 2:
// Uncomment for ST7262 IPS LCD 800x480
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
//     40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
//     45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
//     5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
//     8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
//     0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 8 /* hsync_back_porch */,
//     0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 8 /* vsync_back_porch */,
//     1 /* pclk_active_neg */, 16000000 /* prefer_speed */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
//     800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);
// option 3:
// Uncomment for RPi DPI 1024x600
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
//     40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,
//     45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,
//     5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,
//     8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,
//     0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 43 /* hsync_back_porch */,
//     0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 12 /* vsync_back_porch */,
//     1 /* pclk_active_neg */, 9000000 /* prefer_speed */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
//     1024 /* width */, 600 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);/* 4.0" 86BOX from GUITION ESP32-4848S040 display */
#elif defined(ESP32_4848S040_86BOX_GUITION)
#define GFX_DEV_DEVICE ESP32_4848S040_86BOX_GUITION
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(GFX_NOT_DEFINED /* DC */, 39 /* CS */,48 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,11 /* R0 */, 12 /* R1 */, 13 /* R2 */, 14 /* R3 */, 0 /* R4 */,8 /* G0 */, 20 /* G1 */, 3 /* G2 */, 46 /* G3 */, 9 /* G4 */, 10 /* G5 */,4 /* B0 */, 5 /* B1 */, 6 /* B2 */, 7 /* B3 */, 15 /* B4 */,1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(480 /* width */, 480 /* height */, rgbpanel, 1 /* rotation */, true /* auto_flush */,bus, GFX_NOT_DEFINED /* RST */, st7701_type9_init_operations, sizeof(st7701_type9_init_operations));#elif defined(ESP32_8048S043)
#define GFX_DEV_DEVICE ESP32_8048S043
#define GFX_BL 2
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 8 /* hsync_back_porch */,0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 8 /* vsync_back_porch */,1 /* pclk_active_neg */, 16000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);#elif defined(ESP32_8048S070)
#define GFX_DEV_DEVICE ESP32_8048S070
#define GFX_BL 2
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(41 /* DE */, 40 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,14 /* R0 */, 21 /* R1 */, 47 /* R2 */, 48 /* R3 */, 45 /* R4 */,9 /* G0 */, 46 /* G1 */, 3 /* G2 */, 8 /* G3 */, 16 /* G4 */, 1 /* G5 */,15 /* B0 */, 7 /* B1 */, 6 /* B2 */, 5 /* B3 */, 4 /* B4 */,0 /* hsync_polarity */, 180 /* hsync_front_porch */, 30 /* hsync_pulse_width */, 16 /* hsync_back_porch */,0 /* vsync_polarity */, 12 /* vsync_front_porch */, 13 /* vsync_pulse_width */, 10 /* vsync_back_porch */,1 /* pclk_active_neg */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);#elif defined(ESP32_LCDKIT_SPI)
#define GFX_DEV_DEVICE ESP32_LCDKIT_SPI
#define GFX_BL 23
Arduino_DataBus *bus = new Arduino_ESP32SPI(19 /* DC */, 5 /* CS */, 22 /* SCK */, 21 /* MOSI */, 27 /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, 18 /* RST */, 1 /* rotation */);#elif defined(ESP32_LCDKIT_PAR8A)
#define GFX_DEV_DEVICE ESP32_LCDKIT_PAR8A
Arduino_DataBus *bus = new Arduino_ESP32PAR8(5 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, GFX_NOT_DEFINED /* RD */, 19 /* D0 */, 21 /* D1 */, 0 /* D2 */, 22 /* D3 */, 23 /* D4 */, 33 /* D5 */, 32 /* D6 */, 27 /* D7 */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */);#elif defined(ESP32_LCDKIT_PAR8B)
#define GFX_DEV_DEVICE ESP32_LCDKIT_PAR8B
Arduino_DataBus *bus = new Arduino_ESP32PAR8(5 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, GFX_NOT_DEFINED /* RD */, 25 /* D0 */, 26 /* D1 */, 12 /* D2 */, 13 /* D3 */, 14 /* D4 */, 15 /* D5 */, 2 /* D6 */, 4 /* D7 */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */);#elif defined(ESP32_LCDKIT_PAR16)
#define GFX_DEV_DEVICE ESP32_LCDKIT_PAR16
Arduino_DataBus *bus = new Arduino_ESP32PAR16(5 /* DC */, GFX_NOT_DEFINED /* CS */, 18 /* WR */, GFX_NOT_DEFINED /* RD */,19 /* D0 */, 21 /* D1 */, 0 /* D2 */, 22 /* D3 */, 23 /* D4 */, 33 /* D5 */, 32 /* D6 */, 27 /* D7 */,25 /* D8 */, 26 /* D9 */, 12 /* D10 */, 13 /* D11 */, 14 /* D12 */, 15 /* D13 */, 2 /* D14 */, 4 /* D15 */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */);#elif defined(ESP32_S3_313LCD)
#define GFX_DEV_DEVICE ESP32_S3_313LCD
#define GFX_BL 4
Arduino_DataBus *bus = new Arduino_SWSPI(GFX_NOT_DEFINED /* DC */, 0 /* CS */,17 /* SCK */, 16 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(15 /* DE */, 5 /* VSYNC */, 6 /* HSYNC */, 7 /* PCLK */,19 /* R0 */, 8 /* R1 */, 18 /* R2 */, 17 /* R3 */, 16 /* R4 */,11 /* G0 */, 10 /* G1 */, 9 /* G2 */, 46 /* G3 */, 3 /* G4 */, 20 /* G5 */,47 /* B0 */, 21 /* B1 */, 14 /* B2 */, 13 /* B3 */, 12 /* B4 */,1 /* hsync_polarity */, 30 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 30 /* hsync_back_porch */,1 /* vsync_polarity */, 16 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 16 /* vsync_back_porch */,0 /* pclk_active_neg */, 16000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(376 /* width */, 960 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,bus, GFX_NOT_DEFINED /* RST */, gc9503v_type2_init_operations, sizeof(gc9503v_type2_init_operations));#elif defined(ESP32_S3_BOX_3)
#define GFX_DEV_DEVICE ARDUINO_ESP32_S3_BOX_3
#define GFX_BL 47
Arduino_DataBus *bus = new Arduino_ESP32SPI(4 /* DC */, 5 /* CS */, 7 /* SCK */, 6 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9342(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */);#elif defined(ESP32_S3_EYE)
#define GFX_DEV_DEVICE ESP32_S3_EYE
#define DEV_DEVICE_INIT()                        \{                                              \pinMode(3 /* camera indicator */, OUTPUT);   \digitalWrite(3 /* camera indicator */, LOW); \pinMode(48 /* BACKLIGHT */, OUTPUT);         \digitalWrite(48 /* BACKLIGHT */, LOW);       \}
Arduino_DataBus *bus = new Arduino_ESP32SPI(43 /* DC */, 44 /* CS */, 21 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */, 240 /* width */, 240 /* height */, 0 /* col offset 1 */, 0 /* row offset 1 */, 0 /* col offset 2 */, 80 /* row offset 2 */);#elif defined(ESP32_S3_RGB)
#define GFX_DEV_DEVICE ESP32_S3_RGB
// #define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(GFX_NOT_DEFINED /* DC */, 15 /* CS */,16 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
// option 1:
// Uncomment for 4" rect display //Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(//   13 /* DE */, 12 /* VSYNC */, 11 /* HSYNC */, 14 /* PCLK */,//   10 /* R0 */, 9 /* R1 */, 8 /* R2 */, 7 /* R3 */, 6 /* R4 */,//   5 /* G0 */, 4 /* G1 */, 3 /* G2 */, 2 /* G3 */, 1 /* G4 */, 17 /* G5 */,//   40 /* B0 */, 39 /* B1 */, 38 /* B2 */, 47 /* B3 */, 45 /* B4 */,//   0 /* hsync_polarity */, 80 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 80 /* hsync_back_porch */,//   0 /* vsync_polarity */, 18 /* vsync_front_porch */, 2 /* vsync_pulse_width */, 30 /* vsync_back_porch */, 0 /* pclk_active_neg */, 6000000L /* pclk_frequency */);//Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
//    240 /* width */, 320 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
//    bus, 46 /* RST */, st7701_type10_init_operations, sizeof(st7701_type10_init_operations));// option 2:
// Uncomment for 2.1" round display
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
//     18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
//     4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,
//     10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,
//     15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,
//     1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,
//     1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
//     480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
//     bus, GFX_NOT_DEFINED /* RST */, st7701_type5_init_operations, sizeof(st7701_type5_init_operations));// option 3:
// Uncomment for 2.8" round display
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
//     18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
//     4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,
//     10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,
//     15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,
//     1 /* hsync_polarity */, 50 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 30 /* hsync_back_porch */,
//     1 /* vsync_polarity */, 20 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 30 /* vsync_back_porch */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
//     480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
//     bus, GFX_NOT_DEFINED /* RST */, st7701_type6_init_operations, sizeof(st7701_type6_init_operations));// option 4:
// Uncomment for 2.0" displayArduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(13 /* DE */, 12 /* VSYNC */, 11 /* HSYNC */, 14 /* PCLK */,10 /* R0 */, 9 /* R1 */, 8 /* R2 */, 7 /* R3 */, 6 /* R4 */,5 /* G0 */, 4 /* G1 */, 3 /* G2 */, 2 /* G3 */, 1 /* G4 */, 17 /* G5 */,40 /* B0 */, 39 /* B1 */, 38 /* B2 */, 47 /* B3 */, 45 /* B4 */,1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);Arduino_RGB_Display *gfx = new Arduino_RGB_Display(480 /* width */, 640 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,bus, GFX_NOT_DEFINED /* RST */, st7701_type11_init_operations, sizeof(st7701_type11_init_operations));// option 5:
// Uncomment for 3.5" display
// Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(
//     18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,
//     4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,
//     10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,
//     15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,
//     1 /* hsync_polarity */, 20 /* hsync_front_porch */, 30 /* hsync_pulse_width */, 38 /* hsync_back_porch */,
//     1 /* vsync_polarity */, 4 /* vsync_front_porch */, 3 /* vsync_pulse_width */, 15 /* vsync_back_porch */,
//     10 /* pclk_active_neg */, 16000000 /* prefer_speed */);
// Arduino_RGB_Display *gfx = new Arduino_RGB_Display(
//     640 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,
//     bus, GFX_NOT_DEFINED /* RST */, st7701_type1_init_operations, sizeof(st7701_type1_init_operations));#elif defined(ESP32_S3_RPI_DPI)
#define GFX_DEV_DEVICE ESP32_S3_RPI_DPI
// #define GFX_BL 38#define RGB_PANEL
// e.g. Waveshare 7" RPi DPI LCD: https://www.waveshare.com/wiki/7inch_LCD_for_Pi
// dpi_timings=1024 1 40 48 128 600 1 13 3 45 0 0 0 60 0 37000000 6
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,4 /* R0 */, 3 /* R1 */, 2 /* R2 */, 1 /* R3 */, 0 /* R4 */,10 /* G0 */, 9 /* G1 */, 8 /* G2 */, 7 /* G3 */, 6 /* G4 */, 5 /* G5 */,15 /* B0 */, 14 /* B1 */, 13 /* B2 */, 12 /* B3 */, 11 /* B4 */,1 /* hsync_polarity */, 40 /* hsync_front_porch */, 48 /* hsync_pulse_width */, 128 /* hsync_back_porch */,1 /* vsync_polarity */, 13 /* vsync_front_porch */, 3 /* vsync_pulse_width */, 45 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(1024 /* width */, 600 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);#elif defined(ESP32S3_2_1_TP)
#define GFX_DEV_DEVICE ESP32S3_2_1_TP
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(GFX_NOT_DEFINED /* DC */, 39 /* CS */,48 /* SCK */, 47 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(18 /* DE */, 17 /* VSYNC */, 16 /* HSYNC */, 21 /* PCLK */,4 /* R0 */, 5 /* R1 */, 6 /* R2 */, 7 /* R3 */, 15 /* R4 */,8 /* G0 */, 20 /* G1 */, 3 /* G2 */, 46 /* G3 */, 9 /* G4 */, 10 /* G5 */,11 /* B0 */, 12 /* B1 */, 13 /* B2 */, 14 /* B3 */, 0 /* B4 */,1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,bus, GFX_NOT_DEFINED /* RST */, st7701_type5_init_operations, sizeof(st7701_type5_init_operations));/* Golden Security GS-T3E */
#elif defined(GS_T3E)
#define GFX_DEV_DEVICE GS_T3E
#define GFX_BL 42
Arduino_DataBus *bus = new Arduino_SWSPI(GFX_NOT_DEFINED /* DC */, 4 /* CS */,15 /* SCK */, 48 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(40 /* DE */, 39 /* VSYNC */, 38 /* HSYNC */, 41 /* PCLK */,8 /* R0 */, 18 /* R1 */, 17 /* R2 */, 16 /* R3 */, 0 /* R4 */,13 /* G0 */, 12 /* G1 */, 11 /* G2 */, 10 /* G3 */, 9 /* G4 */, 3 /* G5 */,15 /* B0 */, 48 /* B1 */, 47 /* B2 */, 21 /* B3 */, 14 /* B4 */,1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,bus, 4 /* RST */, st7701_type1_init_operations, sizeof(st7701_type1_init_operations));#elif defined(IBUBLY)
#define GFX_DEV_DEVICE IBUBLY
#define GFX_BL 17 // default backlight pin, you may replace DF_GFX_BL to actual backlight pin
Arduino_DataBus *bus = new Arduino_ESP32SPI(8 /* DC */, 9 /* CS */, 10 /* SCK */, 11 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 12 /* RST */, 1 /* rotation */, true /* IPS */, 240 /* width */, 280 /* height */, 0 /* col offset 1 */, 20 /* row offset 1 */, 0 /* col offset 2 */, 20 /* row offset 2 */);#elif defined(JC1060P470)
#define GFX_DEV_DEVICE JC1060P470
#define GFX_BL 23 // default backlight pin, you may replace DF_GFX_BL to actual backlight pin
#define DSI_PANEL
Arduino_ESP32DSIPanel *dsipanel = new Arduino_ESP32DSIPanel(40 /* hsync_pulse_width */, 160 /* hsync_back_porch */, 160 /* hsync_front_porch */,10 /* vsync_pulse_width */, 23 /*vsync_back_porch  */, 12 /* vsync_front_porch */,48000000 /* prefer_speed */);
Arduino_DSI_Display *gfx = new Arduino_DSI_Display(1024 /* width */, 600 /* height */, dsipanel, 0 /* rotation */, true /* auto_flush */,27 /* RST */, jd9165_init_operations, sizeof(jd9165_init_operations) / sizeof(lcd_init_cmd_t));#elif defined(JC3248W535)
#define GFX_DEV_DEVICE JC3248W535
#define GFX_BL 1
Arduino_DataBus *bus = new Arduino_ESP32QSPI(45 /* CS */, 47 /* SCK */, 21 /* D0 */, 48 /* D1 */, 40 /* D2 */, 39 /* D3 */);
Arduino_GFX *g = new Arduino_AXS15231B(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, false /* IPS */, 320 /* width */, 480 /* height */);
#define CANVAS
Arduino_Canvas *gfx = new Arduino_Canvas(320 /* width */, 480 /* height */, g, 0 /* output_x */, 0 /* output_y */, 0 /* rotation */);#elif defined(JC3636W518)
#define GFX_DEV_DEVICE JC3636W518
#define GFX_BL 15
Arduino_DataBus *bus = new Arduino_ESP32QSPI(10 /* CS */, 9 /* SCK */, 11 /* D0 */, 12 /* D1 */, 13 /* D2 */, 14 /* D3 */);
Arduino_GFX *gfx = new Arduino_ST77916(bus, 47 /* RST */, 0 /* rotation */, true /* IPS */, 360 /* width */, 360 /* height */);#elif defined(LILYGO_T_DECK)
#define GFX_DEV_DEVICE LILYGO_T_DECK
#define DEV_DEVICE_INIT()                            \{                                                  \pinMode(9 /* TDECK_RADIO_CS */, OUTPUT);         \digitalWrite(9 /* TDECK_RADIO_CS */, HIGH);      \pinMode(12 /* TDECK_LCD_CS */, OUTPUT);          \digitalWrite(12 /* TDECK_LCD_CS */, HIGH);       \pinMode(39 /* TDECK_SDCARD_CS */, OUTPUT);       \digitalWrite(39 /* TDECK_SDCARD_CS */, HIGH);    \pinMode(10 /* TDECK_PERI_POWERON */, OUTPUT);    \digitalWrite(10 /* TDECK_PERI_POWERON */, HIGH); \delay(500);                                      \}
#define GFX_BL 42
Arduino_DataBus *bus = new Arduino_HWSPI(11 /* DC */, 12 /* CS */, 40 /* SCK */, 41 /* MOSI */, 38 /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */, false /* IPS */);#elif defined(LILYGO_T_DECK_PLUS)
#define GFX_DEV_DEVICE LILYGO_T_DECK_PLUS
#define DEV_DEVICE_INIT()                            \{                                                  \pinMode(9 /* TDECK_RADIO_CS */, OUTPUT);         \digitalWrite(9 /* TDECK_RADIO_CS */, HIGH);      \pinMode(12 /* TDECK_LCD_CS */, OUTPUT);          \digitalWrite(12 /* TDECK_LCD_CS */, HIGH);       \pinMode(39 /* TDECK_SDCARD_CS */, OUTPUT);       \digitalWrite(39 /* TDECK_SDCARD_CS */, HIGH);    \pinMode(10 /* TDECK_PERI_POWERON */, OUTPUT);    \digitalWrite(10 /* TDECK_PERI_POWERON */, HIGH); \delay(500);                                      \}
#define GFX_BL 42
Arduino_DataBus *bus = new Arduino_HWSPI(11 /* DC */, 12 /* CS */, 40 /* SCK */, 41 /* MOSI */, 38 /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */, false /* IPS */);#elif defined(LILYGO_T_DISPLAY)
#define GFX_DEV_DEVICE LILYGO_T_DISPLAY
#define GFX_BL 4
Arduino_DataBus *bus = new Arduino_ESP32SPI(16 /* DC */, 5 /* CS */, 18 /* SCK */, 19 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 23 /* RST */, 0 /* rotation */, true /* IPS */, 135 /* width */, 240 /* height */, 52 /* col offset 1 */, 40 /* row offset 1 */, 53 /* col offset 2 */, 40 /* row offset 2 */);#elif defined(LILYGO_T_DISPLAY_S3)
#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3
#define DEV_DEVICE_INIT()             \{                                   \pinMode(15 /* PWD */, OUTPUT);    \digitalWrite(15 /* PWD */, HIGH); \}
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_ESP32PAR8Q(7 /* DC */, 6 /* CS */, 8 /* WR */, 9 /* RD */,39 /* D0 */, 40 /* D1 */, 41 /* D2 */, 42 /* D3 */, 45 /* D4 */, 46 /* D5 */, 47 /* D6 */, 48 /* D7 */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 5 /* RST */, 0 /* rotation */, true /* IPS */, 170 /* width */, 320 /* height */, 35 /* col offset 1 */, 0 /* row offset 1 */, 35 /* col offset 2 */, 0 /* row offset 2 */);#elif defined(LILYGO_T_Display_S3_AMOLED)
#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3_AMOLED
Arduino_DataBus *bus = new Arduino_ESP32QSPI(6 /* CS */, 47 /* SCK */, 18 /* D0 */, 7 /* D1 */, 48 /* D2 */, 5 /* D3 */);
Arduino_GFX *gfx = new Arduino_RM67162(bus, 17 /* RST */, 0 /* rotation */);#elif defined(LILYGO_T_Display_S3_AMOLED_1_64)
#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3_AMOLED_1_64
#define DEV_DEVICE_INIT()                \{                                      \pinMode(16 /* LCD_EN */, OUTPUT);    \digitalWrite(16 /* LCD_EN */, HIGH); \}
Arduino_DataBus *bus = new Arduino_ESP32QSPI(10 /* CS */, 12 /* SCK */, 11 /* D0 */, 13 /* D1 */, 14 /* D2 */, 15 /* D3 */);
Arduino_GFX *g = new Arduino_CO5300(bus, 17 /* RST */, 0 /* rotation */, false /* IPS */, 280, 456,20 /* col offset 1 */, 0 /* row offset 1 */, 180 /* col_offset2 */, 24 /* row_offset2 */);
#define CANVAS
Arduino_Canvas *gfx = new Arduino_Canvas(280 /* width */, 456 /* height */, g, 0 /* output_x */, 0 /* output_y */, 0 /* rotation */);#elif defined(LILYGO_T_Display_S3_LONG)
#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3_LONG
#define GFX_BL 1
Arduino_DataBus *bus = new Arduino_ESP32QSPI(12 /* CS */, 17 /* SCK */, 13 /* D0 */, 18 /* D1 */, 21 /* D2 */, 14 /* D3 */);
Arduino_GFX *g = new Arduino_AXS15231B(bus, 47 /* RST */, 0 /* rotation */, false /* IPS */, 180 /* width */, 640 /* height */);
#define CANVAS
Arduino_Canvas *gfx = new Arduino_Canvas(180 /* width */, 640 /* height */, g, 0 /* output_x */, 0 /* output_y */, 0 /* rotation */);#elif defined(LILYGO_T_DISPLAY_S3_PRO)
#define GFX_DEV_DEVICE LILYGO_T_DISPLAY_S3_PRO
#define GFX_BL 48
Arduino_DataBus *bus = new Arduino_ESP32SPI(9 /* DC */, 39 /* CS */, 18 /* SCK */, 17 /* MOSI */, 8 /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, 47 /* RST */, 0 /* rotation */, true /* IPS */, 222 /* width */, 480 /* height */, 49 /* col offset 1 */, 0 /* row offset 1 */, 49 /* col offset 2 */, 0 /* row offset 2 */);#elif defined(LILYGO_T_QT)
#define GFX_DEV_DEVICE LILYGO_T_QT
#define DEV_DEVICE_INIT()           \{                                 \pinMode(10 /* BL */, OUTPUT);   \digitalWrite(10 /* BL */, LOW); \}
Arduino_DataBus *bus = new Arduino_ESP32SPI(6 /* DC */, 5 /* CS */, 3 /* SCK */, 2 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9107(bus, 1 /* RST */, 0 /* rotation */, true /* IPS */);#elif defined(LILYGO_T_RGB)
#define GFX_DEV_DEVICE LILYGO_T_RGB
#include <Wire.h>
#define DEV_DEVICE_INIT()                                       \{                                                             \Wire.begin(8 /* SDA */, 48 /* SCL */, 800000L /* speed */); \}
#define GFX_BL 46
Arduino_DataBus *bus = new Arduino_XL9535SWSPI(8 /* SDA */, 48 /* SCL */, 2 /* XL PWD */, 3 /* XL CS */, 5 /* XL SCK */, 4 /* XL MOSI */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(45 /* DE */, 41 /* VSYNC */, 47 /* HSYNC */, 42 /* PCLK */,21 /* R0 */, 18 /* R1 */, 17 /* R2 */, 16 /* R3 */, 15 /* R4 */,14 /* G0 */, 13 /* G1 */, 12 /* G2 */, 11 /* G3 */, 10 /* G4 */, 9 /* G5 */,7 /* B0 */, 6 /* B1 */, 5 /* B2 */, 3 /* B3 */, 2 /* B4 */,1 /* hsync_polarity */, 50 /* hsync_front_porch */, 1 /* hsync_pulse_width */, 30 /* hsync_back_porch */,1 /* vsync_polarity */, 20 /* vsync_front_porch */, 1 /* vsync_pulse_width */, 30 /* vsync_back_porch */,1 /* pclk_active_neg */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,bus, GFX_NOT_DEFINED /* RST */, st7701_type4_init_operations, sizeof(st7701_type4_init_operations));#elif defined(LILYGO_T_TRACK)
#define GFX_DEV_DEVICE LILYGO_T_TRACK
#define DEV_DEVICE_INIT()              \{                                    \pinMode(4 /* POWER */, OUTPUT);    \digitalWrite(4 /* POWER */, HIGH); \}
Arduino_DataBus *bus = new Arduino_ESP32SPIDMA(7 /* DC */, 9 /* CS */, 5 /* SCK */, 6 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_G *g = new Arduino_JD9613(bus, 8 /* RST */);
#define CANVAS
Arduino_Canvas *gfx = new Arduino_Canvas(126 /* width */, 294 /* height */, g, 0, 0, 3);#elif defined(LILYGO_T_WATCH_2021)
#define GFX_DEV_DEVICE LILYGO_T_WATCH_2021
#define GFX_BL 21
Arduino_DataBus *bus = new Arduino_ESP32SPI(19 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, 27 /* RST */, 0 /* rotation */, true /* IPS */);#elif defined(LILYGO_T4_S3)
#define GFX_DEV_DEVICE LILYGO_T4_S3
#define DEV_DEVICE_INIT()              \{                                    \pinMode(9 /* POWER */, OUTPUT);    \digitalWrite(9 /* POWER */, HIGH); \}
Arduino_DataBus *bus = new Arduino_ESP32QSPI(11 /* CS */, 15 /* SCK */, 14 /* D0 */, 10 /* D1 */, 16 /* D2 */, 12 /* D3 */);
Arduino_GFX *g = new Arduino_RM690B0(bus, 13 /* RST */, 0 /* rotation */, 450 /* width */, 600 /* height */, 16 /* col offset 1 */, 0 /* row offset 1 */, 16 /* col offset 2 */, 0 /* row offset 2 */);
#define CANVAS
Arduino_Canvas *gfx = new Arduino_Canvas(450 /* width */, 600 /* height */, g);#elif defined(MAKERFABS_TFT_TOUCH_3_5)
#define GFX_DEV_DEVICE MAKERFABS_TFT_TOUCH_3_5
Arduino_DataBus *bus = new Arduino_ESP32SPI(33 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, 12 /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9488_18bit(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */, false /* IPS */);#elif defined(MAKERFABS_ESP32_S3_TFT_4_0)
#define GFX_DEV_DEVICE MAKERFABS_ESP32_S3_TFT_4_0
Arduino_DataBus *bus = new Arduino_SWSPI(GFX_NOT_DEFINED /* DC */, 1 /* CS */,12 /* SCK */, 11 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(45 /* DE */, 4 /* VSYNC */, 5 /* HSYNC */, 21 /* PCLK */,39 /* R0 */, 40 /* R1 */, 41 /* R2 */, 42 /* R3 */, 2 /* R4 */,0 /* G0 */, 9 /* G1 */, 14 /* G2 */, 47 /* G3 */, 48 /* G4 */, 3 /* G5 */,6 /* B0 */, 7 /* B1 */, 15 /* B2 */, 16 /* B3 */, 8 /* B4 */,1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,bus, GFX_NOT_DEFINED /* RST */, st7701_type1_init_operations, sizeof(st7701_type1_init_operations));#elif defined(MAKERFABS_ESP32_S3_TFT_4_3_v1_3)
#define GFX_DEV_DEVICE MAKERFABS_ESP32_S3_TFT_4_3_v1_3
#define GFX_BL 2
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 42 /* PCLK */,45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,0 /* hsync_polarity */, 40 /* hsync_front_porch */, 48 /* hsync_pulse_width */, 88 /* hsync_back_porch */,0 /* vsync_polarity */, 13 /* vsync_front_porch */, 3 /* vsync_pulse_width */, 32 /* vsync_back_porch */,1 /* pclk_active_neg */, 16000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);#elif defined(WT32_SC01)
#define GFX_DEV_DEVICE WT32_SC01
#define GFX_BL 23
Arduino_DataBus *bus = new Arduino_ESP32SPI(21 /* DC */, 15 /* CS */, 14 /* SCK */, 13 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, 22 /* RST */, 3 /* rotation */);#elif defined(WZ8048C050)
#define GFX_DEV_DEVICE WZ8048C050
#define GFX_BL 2
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(40 /* DE */, 41 /* VSYNC */, 39 /* HSYNC */, 0 /* PCLK */,45 /* R0 */, 48 /* R1 */, 47 /* R2 */, 21 /* R3 */, 14 /* R4 */,5 /* G0 */, 6 /* G1 */, 7 /* G2 */, 15 /* G3 */, 16 /* G4 */, 4 /* G5 */,8 /* B0 */, 3 /* B1 */, 46 /* B2 */, 9 /* B3 */, 1 /* B4 */,0 /* hsync_polarity */, 8 /* hsync_front_porch */, 4 /* hsync_pulse_width */, 43 /* hsync_back_porch */,0 /* vsync_polarity */, 8 /* vsync_front_porch */, 4 /* vsync_pulse_width */, 12 /* vsync_back_porch */,1 /* pclk_active_neg */, 16000000 /* prefer_speed */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);#elif defined(WAVESHARE_ESP32_S3_LCD_2_8)
#define GFX_DEV_DEVICE WAVESHARE_ESP32_S3_LCD_2_8
#define GFX_BL 5
Arduino_DataBus *bus = new Arduino_HWSPI(41 /* DC */, 42 /* CS */, 40 /* SCK */, 45 /* MOSI */, 46 /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, 39 /* RST */, 0 /* rotation */, true /* IPS */);#elif defined(WAVESHARE_RP2040_LCD_0_96)
#define GFX_DEV_DEVICE WAVESHARE_RP2040_LCD_0_96
#define GFX_BL 25
Arduino_DataBus *bus = new Arduino_RPiPicoSPI(8 /* DC */, 9 /* CS */, 10 /* SCK */, 11 /* MOSI */, GFX_NOT_DEFINED /* MISO */, spi1 /* spi */);
Arduino_GFX *gfx = new Arduino_ST7735(bus, 12 /* RST */, 0 /* rotation */, true /* IPS */, 80 /* width */, 160 /* height */, 26 /* col offset 1 */, 1 /* row offset 1 */, 26 /* col offset 2 */, 1 /* row offset 2 */);#elif defined(XIAO_SAMD21_ROUND_DISPLAY)
#define GFX_DEV_DEVICE XIAO_SAMD21_ROUND_DISPLAY
Arduino_DataBus *bus = new Arduino_HWSPI(3 /* DC */, 1 /* CS */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);#elif defined(XIAO_ESP32C3_ROUND_DISPLAY)
#define GFX_DEV_DEVICE XIAO_ESP32C3_ROUND_DISPLAY
Arduino_DataBus *bus = new Arduino_ESP32SPI(5 /* DC */, 3 /* CS */, 8 /* SCK */, 10 /* MOSI */, 9 /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);#elif defined(XIAO_ESP32S3_ROUND_DISPLAY)
#define GFX_DEV_DEVICE XIAO_ESP32S3_ROUND_DISPLAY
Arduino_DataBus *bus = new Arduino_ESP32SPI(4 /* DC */, 2 /* CS */, 7 /* SCK */, 9 /* MOSI */, 8 /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */);#elif defined(ZX2D10GE10R_V4848)
#define GFX_DEV_DEVICE ZX2D10GE10R_V4848
#define GFX_BL 38
Arduino_DataBus *bus = new Arduino_SWSPI(GFX_NOT_DEFINED /* DC */, 21 /* CS */,47 /* SCK */, 41 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(39 /* DE */, 48 /* VSYNC */, 40 /* HSYNC */, 45 /* PCLK */,10 /* R0 */, 16 /* R1 */, 9 /* R2 */, 15 /* R3 */, 46 /* R4 */,8 /* G0 */, 13 /* G1 */, 18 /* G2 */, 12 /* G3 */, 11 /* G4 */, 17 /* G5 */,47 /* B0 */, 41 /* B1 */, 0 /* B2 */, 42 /* B3 */, 14 /* B4 */,1 /* hsync_polarity */, 10 /* hsync_front_porch */, 10 /* hsync_pulse_width */, 10 /* hsync_back_porch */,1 /* vsync_polarity */, 14 /* vsync_front_porch */, 2 /* vsync_pulse_width */, 12 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,bus, GFX_NOT_DEFINED /* RST */, st7701_type7_init_operations, sizeof(st7701_type7_init_operations));#elif defined(ZX3D50CE02S)
#define GFX_DEV_DEVICE ZX3D50CE02S
#define GFX_BL 45
Arduino_DataBus *bus = new Arduino_ESP32LCD8(0 /* DC */, GFX_NOT_DEFINED /* CS */, 47 /* WR */, GFX_NOT_DEFINED /* RD */,9 /* D0 */, 46 /* D1 */, 3 /* D2 */, 8 /* D3 */, 18 /* D4 */, 17 /* D5 */, 16 /* D6 */, 15 /* D7 */);
Arduino_GFX *gfx = new Arduino_ST7796(bus, 4 /* RST */, 0 /* rotation */, true /* IPS */);#elif defined(ZX3D95CE01S_AR)
#define GFX_DEV_DEVICE ZX3D95CE01S_AR
#define GFX_BL 45
Arduino_DataBus *bus = new Arduino_SWSPI(GFX_NOT_DEFINED /* DC */, 0 /* CS */,10 /* SCK */, 9 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(13 /* DE */, 12 /* VSYNC */, 11 /* HSYNC */, 14 /* PCLK */,2 /* R0 */, 17 /* R1 */, 16 /* R2 */, 1 /* R3 */, 15 /* R4 */,41 /* G0 */, 46 /* G1 */, 3 /* G2 */, 42 /* G3 */, 8 /* G4 */, 18 /* G5 */,10 /* B0 */, 9 /* B1 */, 40 /* B2 */, 20 /* B3 */, 19 /* B4 */,1 /* hsync_polarity */, 10 /* hsync_front_porch */, 8 /* hsync_pulse_width */, 50 /* hsync_back_porch */,1 /* vsync_polarity */, 10 /* vsync_front_porch */, 8 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,bus, GFX_NOT_DEFINED /* RST */, gc9503v_type1_init_operations, sizeof(gc9503v_type1_init_operations));#elif defined(ZX3D95CE01S_TR)
#define GFX_DEV_DEVICE ZX3D95CE01S_TR
#define GFX_BL 5
Arduino_DataBus *bus = new Arduino_SWSPI(GFX_NOT_DEFINED /* DC */, 38 /* CS */,45 /* SCK or SCLK */, 48 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(40 /* DE */, 41 /* VSYNC */, 42 /* HSYNC */, 39 /* PCLK */,18 /* R0 */, 8 /* R1 */, 3 /* R2 */, 46 /* R3 */, 10 /* R4 */,14 /* G0 */, 13 /* G1 */, 12 /* G2 */, 11 /* G3 */, 16 /* G4 */, 17 /* G5 */,45 /* B0 */, 48 /* B1 */, 47 /* B2 */, 0 /* B3 */, 21 /* B4 */,1 /* hsync_polarity */, 8 /* hsync_front_porch */, 10 /* hsync_pulse_width */, 50 /* hsync_back_porch */,1 /* vsync_polarity */, 8 /* vsync_front_porch */, 10 /* vsync_pulse_width */, 20 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(480 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */,bus, 41 /* RST */, gc9503v_type1_init_operations, sizeof(gc9503v_type1_init_operations));#elif defined(ZX7D00CE01S)
#define GFX_DEV_DEVICE ZX7D00CE01S
#define GFX_BL 45
#define RGB_PANEL
Arduino_ESP32RGBPanel *rgbpanel = new Arduino_ESP32RGBPanel(39 /* DE */, 38 /* VSYNC */, 5 /* HSYNC */, 9 /* PCLK */,10 /* R0 */, 11 /* R1 */, 12 /* R2 */, 13 /* R3 */, 14 /* R4 */,21 /* G0 */, 0 /* G1 */, 46 /* G2 */, 3 /* G3 */, 8 /* G4 */, 18 /* G5 */,17 /* B0 */, 16 /* B1 */, 15 /* B2 */, 7 /* B3 */, 6 /* B4 */,0 /* hsync_polarity */, 0 /* hsync_front_porch */, 210 /* hsync_pulse_width */, 30 /* hsync_back_porch */,0 /* vsync_polarity */, 0 /* vsync_front_porch */, 22 /* vsync_pulse_width */, 13 /* vsync_back_porch */);
Arduino_RGB_Display *gfx = new Arduino_RGB_Display(800 /* width */, 480 /* height */, rgbpanel, 0 /* rotation */, true /* auto_flush */);/* Wio Terminal */
#elif defined(ARDUINO_ARCH_SAMD) && defined(SEEED_GROVE_UI_WIRELESS)
#define GFX_DEV_DEVICE WIO_TERMINAL
// #define GFX_BL LCD_BACKLIGHT
Arduino_DataBus *bus = new Arduino_HWSPI(LCD_DC /* DC */, LCD_SS_PIN /* CS */);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 1 /* rotation */);/* ESP32-S3-BOX */
#elif defined(ARDUINO_ESP32_S3_BOX)
#define GFX_DEV_DEVICE ARDUINO_ESP32_S3_BOX
#define GFX_BL 45
Arduino_DataBus *bus = new Arduino_ESP32SPI(4 /* DC */, 5 /* CS */, 7 /* SCK */, 6 /* MOSI */, 0 /* MISO */);
Arduino_GFX *gfx = new Arduino_ILI9342(bus, 48 /* RST */, 0 /* rotation */);/* M5Stack */
#elif defined(ARDUINO_M5Stack_Core_ESP32) || defined(ARDUINO_M5STACK_FIRE)
#define GFX_DEV_DEVICE ARDUINO_M5Stack_Core_ESP32
// #define GFX_BL 32
Arduino_DataBus *bus = new Arduino_ESP32SPI(27 /* DC */, 14 /* CS */, SCK, MOSI, MISO);
Arduino_GFX *gfx = new Arduino_ILI9342(bus, 33 /* RST */, 2 /* rotation */);#elif defined(ARDUINO_M5Stack_ATOMS3)
#define GFX_DEV_DEVICE ARDUINO_M5Stack_ATOMS3
#define GFX_BL 16
Arduino_DataBus *bus = new Arduino_ESP32SPI(33 /* DC */, 15 /* CS */, 17 /* SCK */, 21 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_GC9107(bus, 34 /* RST */, 0 /* rotation */, true /* IPS */);/* Odroid-Go */
#elif defined(ARDUINO_ODROID_ESP32)
#define GFX_DEV_DEVICE ARDUINO_ODROID_ESP32
// #define GFX_BL 14
Arduino_DataBus *bus = new Arduino_ESP32SPI(21 /* DC */, 5 /* CS */, SCK, MOSI, MISO);
Arduino_GFX *gfx = new Arduino_ILI9341(bus, GFX_NOT_DEFINED /* RST */, 3 /* rotation */);
// Arduino_ST7789 *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 3 /* rotation */, true /* IPS */);/* LILYGO T-Watch */
#elif defined(ARDUINO_T) || defined(ARDUINO_TWATCH_BASE) || defined(ARDUINO_TWATCH_2020_V1) || defined(ARDUINO_TWATCH_2020_V2)
#define GFX_DEV_DEVICE ARDUINO_T_WATCH
#define GFX_BL 12
Arduino_DataBus *bus = new Arduino_ESP32SPI(27 /* DC */, 5 /* CS */, 18 /* SCK */, 19 /* MOSI */, GFX_NOT_DEFINED /* MISO */);
Arduino_GFX *gfx = new Arduino_ST7789(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, true /* IPS */, 240 /* width */, 240 /* height */, 0 /* col offset 1 */, 0 /* row offset 1 */, 0 /* col offset 2 */, 80 /* row offset 2 */);/* Waveshare RP2040-LCD-1.28 */
#elif defined(ARDUINO_WAVESHARE_RP2040_LCD_1_28)
#define GFX_DEV_DEVICE ARDUINO_WAVESHARE_RP2040_LCD_1_28
#define GFX_BL 25
Arduino_DataBus *bus = new Arduino_RPiPicoSPI(8 /* DC */, 9 /* CS */, 10 /* SCK */, 11 /* MOSI */, 12 /* MISO */, spi1 /* spi */);
Arduino_GFX *gfx = new Arduino_GC9A01(bus, 12 /* RST */, 0 /* rotation */, true /* IPS */);#endif

http://www.dtcms.com/wzjs/221420.html

相关文章：

  • 网站做销售是斤么工作软件测试培训
  • 做网站花多钱百度网站统计
  • 社区网站 租用服务器还是只需要购买空间深圳疫情防控最新消息
  • app开发制作网站平台网络建站优化科技
  • 陕西广告公司网站建设百度股市行情上证指数
  • 网站建设的售后服务怎么写收录好的网站有哪些
  • 土木毕业设计代做网站安卓优化大师新版
  • 网站建设精英seo网络推广到底是做什么的
  • 新疆建设兵团管理局网站优化网站标题
  • 山东省建设发展研究院网站百度seo排名曝光行者seo
  • 成都装修公司十大排名网站建设优化推广系统
  • 一个网站多少钱?郭生b如何优化网站
  • 手机怎么进入国外网站重庆seo网站排名
  • 毕业论文网站设计与建设关键词排名优化易下拉软件
  • 微信采集wordpressseo排名优化工具推荐
  • 用macbook做网站开发网络营销技能大赛优秀作品
  • 商务网站建设联系方式百度seo关键词排名 s
  • 兼职做任务的网站怎样在百度上打广告
  • 国际b2c电商平台有哪些站长工具seo综合查询怎么关闭
  • bluehost 网站后台杭州网站优化咨询
  • 美食网站的设计与制作代码泰州seo
  • 小程序源码怎么使用seo二级目录
  • 2345网址大全设主页访问app优化推广
  • 妇科医院网站建设怎么做免费下载百度并安装
  • 顺德定制网站建设seo咨询邵阳
  • html5网站图标关键词优化一年多少钱
  • 商务网站建设哪家好如何制作一个网址
  • 做网站1008做网站 - 百度网站建立的步骤
  • 哪个网站免费建站最好博客可以做seo吗
  • 建设官网流程自动优化app