当前位置：首页 > wzjs >正文

广州h5网站制作2020站群seo系统

wzjs 2025/7/31 23:40:15

广州h5网站制作,2020站群seo系统,成品网站源码68w68游戏,可以直接进入的舆情网站Arduino示例代码讲解：Project 08 - Digital Hourglass 数字沙漏 Project 08 - Digital Hourglass 数字沙漏程序功能概述功能：硬件要求：输出：代码结构全局变量`setup()` 函数`loop()` 函数计时和点亮LED：读取倾斜开关状态：重置LED和计时器：运行过程注意事项Project 08 - …

Arduino示例代码讲解：Project 08 - Digital Hourglass 数字沙漏

Project 08 - Digital Hourglass 数字沙漏
- 程序功能概述
- - - 功能：
    - 硬件要求：
    - 输出：
- 代码结构
- - - 全局变量
    - `setup()` 函数
    - `loop()` 函数
    - 计时和点亮LED：
    - 读取倾斜开关状态：
    - 重置LED和计时器：
- 运行过程
- 注意事项

Project 08 - Digital Hourglass 数字沙漏

/*Arduino Starter Kit exampleProject 8  - Digital HourglassThis sketch is written to accompany Project 8 in theArduino Starter KitParts required:10 kilohm resistorsix 220 ohm resistorssix LEDstilt switchCreated 13 September 2012by Scott Fitzgeraldhttp://arduino.cc/starterKitThis example code is part of the public domain*/// named constant for the switch pin
const int switchPin = 8;unsigned long previousTime = 0; // store the last time an LED was updated
int switchState = 0; // the current switch state
int prevSwitchState = 0; // the previous switch state
int led = 2; // a variable to refer to the LEDs// 600000 = 10 minutes in milliseconds
long interval = 600000; // interval at which to light the next LEDvoid setup() {// set the LED pins as outputsfor (int x = 2; x < 8; x++) {pinMode(x, OUTPUT);}// set the tilt switch pin as inputpinMode(switchPin, INPUT);