当前位置: 首页 > news >正文

HCIP---MGRE实验

一、要求及拓扑

二、分析思路

  1. IP 地址: 给所有路由器接口和 PC 分配 IP 地址,并规划隧道使用的 IP 地址段。
  2. PPP/HDLC: 在指定的串行接口上配置相应的封装和认证(PAP/CHAP)。
  3. GRE 隧道:
    • 创建 R1-R4 的点对点 GRE 隧道,指定源/目的 IP 和隧道接口 IP。
    • 创建 R1-R2 和 R1-R3 的 MGRE 隧道,R1 作为 Hub,为各端指定源/目的 IP 和隧道接口 IP。
  4. RIP: 在所有路由器上启动 RIPv2,宣告所有连接的子网(包括物理接口和隧道接口)。

三、配置过程

        1.IP地址

                R1


<Huawei>sy
[Huawei]sys R1
[R1]int g 0/0/0
[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
[R1-GigabitEthernet0/0/0]int serial 4/0/0
[R1-Serial4/0/0]ip address 15.1.1.1 24

                R2


<Huawei>sys
[Huawei]sys R2
[R2]int g 0/0/0
[R2-GigabitEthernet0/0/0]ip address 192.168.2.2 24
[R2-GigabitEthernet0/0/0]int serial 4/0/0
[R2-Serial4/0/0]ip address 25.1.1.2 24

                R3


<Huawei>sys
[Huawei]sys R3
[R3]int g 0/0/0
[R3-GigabitEthernet0/0/0]ip address 192.168.3.3 24
[R3-GigabitEthernet0/0/0]int serial 4/0/0
[R3-Serial4/0/0]ip address 35.1.1.3 24

                R4


<Huawei>sys
[Huawei]sys R4
[R4]int g 0/0/0
[R4-GigabitEthernet0/0/0]ip address 192.168.4.4 24
[R4-GigabitEthernet0/0/0]int g 0/0/1
[R4-GigabitEthernet0/0/1]ip address 45.1.1.4 24

                R5


<Huawei>sys
[Huawei]sys R5
[R5]int serial 4/0/1
[R5-Serial4/0/1]ip address 15.1.1.5 24
[R5-Serial4/0/1]int serial 4/0/0
[R5-Serial4/0/0]ip address 35.1.1.5 24
[R5-Serial4/0/0]int serial 3/0/1
[R5-Serial3/0/1]ip address 25.1.1.5 24
[R5]int g 0/0/0
[R5-GigabitEthernet0/0/0]ip address 45.1.1.5 24
[R5]int LoopBack 0
[R5-LoopBack0]ip address 5.5.5.5 24

                PC1

                PC2

                PC3

                PC4        

        2.静态路由、PPP/HDLC

                R1

[R1]ip route-static 0.0.0.0 0 15.1.1.5
[R1]int serial 4/0/0
[R1-Serial4/0/0]ppp pap local-user wangdaye password cipher wdy123456

                R2

[R2]ip route-static 0.0.0.0 0 25.1.1.5
[R2]int serial 4/0/0
[R2-Serial4/0/0]ppp pap local-user zhangdaye password cipher zdy123456

                R3

[R3]ip route-static 0.0.0.0 0 35.1.1.5
[R3-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y

                R4

[R4]ip route-static 0.0.0.0 0 45.1.1.5

                R5

[R5]aaa
[R5-aaa]local-user wangdaye password cipher wdy12345
Info: Add a new user.
[R5-aaa]local-user wangdaye service-type ppp
[R5-aaa]int serial 4/0/1
[R5-Serial4/0/1]ppp authentication-mode pap
[R5-Serial4/0/1]q
[R5]aaa
[R5-aaa]local-user zhangdaye password cipher zdy12345
Info: Add a new user.
[R5-aaa]local-user zhangdaye service-type ppp
[R5]int serial 3/0/1
[R5-Serial3/0/1]ppp authentication-mode chap
[R5-Serial4/0/0]link-protocol hdlc
Warning: The encapsulation protocol of the link will be changed. Continue? [Y/N]
:y

        3.GRE隧道

                R1

[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip add 10.1.2.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 15.1.1.1
[R1-Tunnel0/0/0]nhrp network-id 100
[R1-Tunnel0/0/0]nhrp entry multicast dynamic
[R1-Tunnel0/0/0]undo rip split-horizon
[R1]int Tunnel 0/0/1
[R1-Tunnel0/0/1]ip add 10.1.1.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre
[R1-Tunnel0/0/1]source 15.1.1.1
[R1-Tunnel0/0/1]destination 45.1.1.4

                R2


[R2]int Tunnel 0/0/0
[R2-Tunnel0/0/0]ip address 10.1.2.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp
[R2-Tunnel0/0/0]source Serial 4/0/0
[R2-Tunnel0/0/0]nhrp network-id 100
[R2-Tunnel0/0/0]nhrp entry 10.1.2.1 15.1.1.1 register
[R2-Tunnel0/0/0]undo rip split-horizon

                R3


[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]ip address 10.1.2.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp
[R3-Tunnel0/0/0]source Serial 4/0/0
[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]nhrp entry 10.1.2.1 15.1.1.1 register  
[R3-Tunnel0/0/0]undo rip split-horizon 

                R4


[R4]int Tunnel 0/0/1
[R4-Tunnel0/0/1]ip address 10.1.1.4 24
[R4-Tunnel0/0/1]tunnel-protocol gre
[R4-Tunnel0/0/1]source 45.1.1.4
[R4-Tunnel0/0/1]destination 15.1.1.1

        4.RIP\NAT

                R1


[R1]rip 1
[R1-rip-1]version 2
[R1-rip-1]undo summary
[R1-rip-1]network 192.168.1.0
[R1-rip-1]network 10.0.0.0
[R1-rip-1]q
[R1]acl 2000
[R1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R1-acl-basic-2000]q
[R1]int Serial 4/0/0
[R1-Serial4/0/0]nat outbound 2000

                R2

[R2]rip 1
[R2-rip-1]version 2
[R2-rip-1]undo summary
[R2-rip-1]network 192.168.2.0
[R2-rip-1]network 10.0.0.0
[R2-rip-1]q
[R2]acl 2000
[R2-acl-basic-2000]rule permit source 192.168.2.0 0.0.0.255
[R2-acl-basic-2000]q
[R2]int Serial 4/0/0
[R2-Serial4/0/0]nat outbound 2000

                R3

[R3]rip 1
[R3-rip-1]version 2
[R3-rip-1]undo summary
[R3-rip-1]network 192.168.3.0
[R3-rip-1]network 10.0.0.0
[R3-rip-1]q
[R3]acl 2000
[R3-acl-basic-2000]rule permit source 192.168.3.0 0.0.0.255
[R3-acl-basic-2000]q
[R3]int Serial 4/0/0
[R3-Serial4/0/0]nat outbound 2000

                R4


[R4]rip 1
[R4-rip-1]version 2
[R4-rip-1]undo summary
[R4-rip-1]network 192.168.4.0
[R4-rip-1]network 10.0.0.0
[R4-rip-1]q
[R4]acl 2000
[R4-acl-basic-2000]rule permit source 192.168.4.0 0.0.0.255
[R4-acl-basic-2000]q
[R4]int g0/0/0
[R4-GigabitEthernet0/0/0]nat outbound 2000

四、检测

http://www.dtcms.com/a/300449.html

相关文章:

  • 嵌入式硬件篇---ESP32稳压板
  • OpenLayers 综合案例-轨迹回放
  • LeetCode|Day27|70. 爬楼梯|Python刷题笔记
  • catkin_make与catkin build的关系与区别(使用catkin build的好处)
  • MGRE实验
  • 深入解析 Vue 3 中 v-model 与表单元素的绑定机制
  • 多租户Kubernetes集群架构设计实践——隔离、安全与弹性扩缩容
  • Spring Boot自动配置原理深度解析
  • 昇思学习营-模型推理和性能优化
  • Keepalived + LVS-DR 高可用与负载均衡实验
  • 【Python系列】使用 memory_profiler 诊断 Flask 应用内存问题
  • 结构化文本文档的内容抽取与版本重构策略
  • 8. 状态模式
  • 【NLP舆情分析】基于python微博舆情分析可视化系统(flask+pandas+echarts) 视频教程 - 微博舆情分析实现
  • vLLM 的“投机取巧”:Speculative Decoding 如何加速大语言模型推理
  • Spring Boot2错误处理
  • 负载均衡 LoadBalance
  • Spring Boot音乐服务器项目-查询音乐模块
  • 《Foundation 面板:设计、功能与最佳实践解析》
  • Java学习-------序列化与反序列化
  • UV: 下一代 Python 包管理工具
  • golang--虚拟地址空间
  • 阿里 Qwen3 四模型齐发,字节 Coze 全面开源,GPT-5 8 月初发布!| AI Weekly 7.21-7.27
  • 批量重命名带编号工具,附免费地址
  • Android网络框架封装 ---> Retrofit + OkHttp + 协程 + LiveData + 断点续传 + 多线程下载 + 进度框交互
  • linux根据pid获取服务目录
  • 一场关于电商零售增长破局的深圳探索
  • Vulnhub red靶机渗透攻略详解
  • PHP框架之Laravel框架教程:2. 控制器、路由、视图简单介绍
  • Baumer工业相机堡盟工业相机如何通过YoloV8深度学习模型实现标签条码一维码的检测(C#代码,UI界面版)