当前位置: 首页 > news >正文

20250603在荣品的PRO-RK3566开发板的Android13下的命令行查看RK3566的温度

20250603在荣品的PRO-RK3566开发板的Android13下的命令行查看RK3566的温度
2025/6/3 11:58


RK3566的cpu运行效率 top


rk3566_t:/ #
rk3566_t:/ #
rk3566_t:/ # cd /sys/class/thermal/
rk3566_t:/sys/class/thermal # ls -l
rk3566_t:/sys/class/thermal # cd thermal_zone0/
rk3566_t:/sys/class/thermal/thermal_zone0 #
rk3566_t:/sys/class/thermal/thermal_zone0 # ls -l
rk3566_t:/sys/class/thermal/thermal_zone0 # cat temp
51875
rk3566_t:/sys/class/thermal/thermal_zone0 #

在命令行查看RK3566的温度

在 RK3566 平台上,你可以通过以下方法在命令行中查看 SoC 温度:

方法 1:通过 sysfs 接口查询

RK3566 的温度传感器数据通常通过内核的 thermal 子系统暴露在 /sys/class/thermal 目录下:

bash

复制

下载

# 列出所有 thermal zone
ls /sys/class/thermal/# 通常 thermal_zone0 对应 SoC 温度
cat /sys/class/thermal/thermal_zone0/temp# 更友好的显示方式(除以1000得到摄氏度)
echo "CPU温度: $(($(cat /sys/class/thermal/thermal_zone0/temp)/1000))°C"

方法 2:使用 sensors 命令(需安装 lm-sensors)

如果系统支持:

bash

复制

下载

# 安装 lm-sensors(如果未安装)
sudo apt install lm-sensors# 检测硬件传感器
sudo sensors-detect# 查看温度信息
sensors

方法 3:通过调试接口(需要 root)

有些 RK3566 平台可能提供额外的调试接口:

bash

复制

下载

# 查看 PMIC 温度(如果支持)
cat /sys/kernel/debug/regulator/regulator_temp# 或通过 debugfs
cat /sys/kernel/debug/thermal/thermal_zone0/temp

方法 4:使用第三方工具

bash

复制

下载

# 安装并运行 psensor
sudo apt install psensor
psensor

注意事项:

  1. 不同厂商的 RK3566 板卡/设备可能温度传感器路径略有不同

  2. 某些嵌入式系统可能简化了 thermal 子系统实现

  3. 温度值通常是毫摄氏度(需要除以1000得到摄氏度)

  4. 如果没有显示,可能需要检查内核配置是否启用了 thermal 驱动:

    bash

    复制

    下载

    dmesg | grep thermal

如果需要更精确的信息,建议查阅你所使用的具体 RK3566 平台的硬件手册或内核设备树配置。

在命令行查看RK3566的温度 更加友好的显示方式。RK3566不支持 中文。不支持 温度的度的显示。请切换为 英文状态下的更加友好的显示方式

Here are several English-friendly ways to check the RK3566 temperature in the command line:

Method 1: Simple Temperature Readout

bash

复制

下载

echo "CPU Temp: $(($(cat /sys/class/thermal/thermal_zone0/temp)/1000))C"

Sample output:

复制

下载

CPU Temp: 42C

Method 2: Formatted Thermal Information

bash

复制

下载

temp=$(($(cat /sys/class/thermal/thermal_zone0/temp)/1000))
printf "RK3566 Temperature\n=================\nSOC: %d°C\n" $temp

Sample output:

复制

下载

RK3566 Temperature
=================
SOC: 42°C

Method 3: Continuous Monitoring (refresh every 2 seconds)

bash

复制

下载

watch -n 2 'echo "Current Temp: $(($(cat /sys/class/thermal/thermal_zone0/temp)/1000))C"'

Method 4: Thermal Zone Summary

bash

复制

下载

for zone in $(ls /sys/class/thermal/ | grep thermal_zone); dotype=$(cat /sys/class/thermal/${zone}/type)temp=$(($(cat /sys/class/thermal/${zone}/temp)/1000))printf "%-15s: %2dC\n" $type $temp
done

Sample output:

复制

下载

soc_thermal    : 42C

Method 5: Color-Coded Temperature (requires terminal with color support)

bash

复制

下载

temp=$(($(cat /sys/class/thermal/thermal_zone0/temp)/1000))
if [ $temp -gt 70 ]; thenecho -e "\033[31mWARNING: High Temp - ${temp}C\033[0m"
elif [ $temp -gt 50 ]; thenecho -e "\033[33mNormal Temp - ${temp}C\033[0m"
elseecho -e "\033[32mCool Temp - ${temp}C\033[0m"
fi

Notes:

  1. All methods use standard POSIX shell commands for maximum compatibility

  2. The degree symbol (°) is optional and may be replaced with just 'C'

  3. For embedded systems with limited shell support, Method 1 is the most universal

  4. If thermal_zone0 doesn't exist, check other zones with ls /sys/class/thermal/

使用shell脚本 表示 温度的度

在 Shell 脚本中,你可以使用 printf 或 echo -e 来显示温度的单位符号(°C)。以下是几种在 RK3566 上友好显示温度的方法:


方法 1:使用 Unicode 编码显示 °C 符号

bash

复制

下载

#!/bin/bashtemp=$(($(cat /sys/class/thermal/thermal_zone0/temp)/1000))
echo "CPU Temp: ${temp}°C"

输出示例:

复制

下载

CPU Temp: 42°C

方法 2:使用 printf 格式化输出

bash

复制

下载

#!/bin/bashtemp=$(($(cat /sys/class/thermal/thermal_zone0/temp)/1000))
printf "Current Temperature: %d°C\n" "$temp"

输出示例:

复制

下载

Current Temperature: 42°C

方法 3:使用 ASCII 替代符号(兼容性更强)

如果终端不支持 Unicode 符号,可以用 C 代替 °C

bash

复制

下载

#!/bin/bashtemp=$(($(cat /sys/class/thermal/thermal_zone0/temp)/1000))
echo "CPU Temp: ${temp}C"

输出示例:

复制

下载

CPU Temp: 42C

方法 4:带颜色和警告的 Shell 脚本

bash

复制

下载

#!/bin/bashtemp=$(($(cat /sys/class/thermal/thermal_zone0/temp)/1000))if [ "$temp" -gt 70 ]; thenecho -e "\e[31mWARNING: High Temperature - ${temp}°C\e[0m"
elif [ "$temp" -gt 50 ]; thenecho -e "\e[33mNormal Temperature - ${temp}°C\e[0m"
elseecho -e "\e[32mCool Temperature - ${temp}°C\e[0m"
fi

输出示例:

  • 如果温度 > 70°C → 红色警告

  • 如果温度 50-70°C → 黄色提示

  • 如果温度 < 50°C → 绿色正常


方法 5:持续监控温度(每 2 秒刷新)

bash

复制

下载

#!/bin/bashwhile true; dotemp=$(($(cat /sys/class/thermal/thermal_zone0/temp)/1000))printf "\rCurrent Temperature: %d°C" "$temp"sleep 2
done

按 Ctrl+C 退出监控


注意事项

  1. 确保 /sys/class/thermal/thermal_zone0/temp 存在(不同 RK3566 设备可能路径不同)。

  2. 如果终端不支持 Unicode,可以用 C 代替 °C

  3. 部分嵌入式系统可能不支持 echo -e 颜色,可以去掉颜色代码。

你可以选择最适合你的方式,推荐 方法 1 或 方法 2 进行简单温度读取,方法 5 用于实时监控。

在SHELL脚本中,如果让小写的字幕o显示在上面?

在 Shell 脚本中,如果你想让小写字母 o 显示在数字的上方(类似上标效果),可以使用 Unicode 组合字符 或 ANSI 控制码 来实现。但由于终端限制,纯文本环境无法真正实现上标,以下是几种替代方案:


方法 1:使用 Unicode 上标字母(部分支持)

Unicode 提供了上标字母 (U+1D52),但并非所有终端都能正确渲染:

bash

复制

下载

echo "42°C"  # 正常显示
echo "42ᵒC"  # 尝试用小上标 ᵒ 替代(可能显示异常)

输出可能类似:

复制

下载

42°C
42ᵒC

方法 2:用 printf 和垂直偏移(部分终端支持)

某些终端(如 terminatorgnome-terminal)支持 ANSI 控制码调整字符位置:

bash

复制

下载

printf "42\e[1A\e[1Do\e[1B\e[1DC\n"  # 尝试将 o 上移一行

效果不稳定,可能显示为:

复制

下载

42oC

方法 3:直接使用特殊符号 °(推荐)

大多数 Shell 环境支持 Unicode 的度符号 °(U+00B0),这是最可靠的方式:

bash

复制

下载

echo "42°C"  # 标准温度显示

输出:

复制

下载

42°C

方法 4:用 ASCII 艺术模拟上标

如果终端完全无法显示 Unicode,可以用换行和空格模拟:

bash

复制

下载

echo -e "42\n oC"

输出:

复制

下载

42oC

注意事项

  1. 终端兼容性

    • Unicode 上标(如 )在 SSH、嵌入式设备终端中可能显示为乱码。

    • 推荐优先使用 °(U+00B0),它被广泛支持。

  2. 脚本可移植性
    如果目标设备是 RK3566 嵌入式系统,建议直接使用 C 或 °C,避免复杂格式。

  3. 检查终端支持
    运行 echo -e "\u00B0" 测试是否能正常显示 ° 符号。


最终推荐方案

bash

复制

下载

# 最兼容的写法(支持 Unicode 时用 °,否则用 o)
if echo -e "\u00B0" | grep -q "°"; thenecho "42°C"
elseecho "42oC"  # 降级显示
fi

输出:

  • 支持 Unicode → 42°C

  • 不支持 → 42oC


完整的LOG:
Microsoft Windows [版本 10.0.19045.5737]
(c) Microsoft Corporation。保留所有权利。

C:\Users\QQ>adb shell
adb server version (19045) doesn't match this client (41); killing...
could not read ok from ADB Server
* failed to start daemon
adb.exe: cannot connect to daemon

C:\Users\QQ>adb shell
adb server version (19045) doesn't match this client (41); killing...
* daemon started successfully
adb.exe: no devices/emulators found

C:\Users\QQ>adb shell
rk3566_t:/ $ su
rk3566_t:/ # dmesg
[   12.957330] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[   12.957355] Linux version 5.10.157 (rootroot@rootroot-X99-Turbo) (Android (8490178, based on r450784d) clang version 14.0.6 (https://android.googlesource.com/toolchain/llvm-project 4c603efb0cca074e9238af8b4106c30add4418f6), LLD 14.0.6) #8 SMP PREEMPT Mon Jun 2 17:51:31 CST 2025
[   12.964926] Machine model: pro-rk3566
[   12.998054] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
[   13.046332] printk: bootconsole [uart8250] enabled
[   13.054583] Reserved memory: created CMA memory pool at 0x0000000010000000, size 8 MiB
[   13.064031] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[   13.131196] Zone ranges:
[   13.134750] DMA32    [mem 0x0000000000200000-0x00000000ffffffff]
[   13.142295] Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[   13.149836] Movable zone start for each node
[   13.155276] Early memory node ranges
[   13.159954] node   0: [mem 0x0000000000200000-0x00000000083fffff]
[   13.167589] node   0: [mem 0x0000000009400000-0x00000000efffffff]
[   13.175222] node   0: [mem 0x00000001f0000000-0x00000001ffffffff]
[   13.182857] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[   13.191351] On node 0 totalpages: 1043968
[   13.191358] DMA32 zone: 15288 pages used for memmap
[   13.191361] DMA32 zone: 0 pages reserved
[   13.191365] DMA32 zone: 978432 pages, LIFO batch:63
[   13.191369] Normal zone: 1024 pages used for memmap
[   13.191372] Normal zone: 65536 pages, LIFO batch:15
[   13.210831] psci: probing for conduit method from DT.
[   13.217147] psci: PSCIv1.1 detected in firmware.
[   13.222971] psci: Using standard PSCI v0.2 function IDs
[   13.229463] psci: Trusted OS migration not required
[   13.235575] psci: SMC Calling Convention v1.2
[   13.241498] percpu: Embedded 32 pages/cpu s91800 r8192 d31080 u131072
[   13.249350] pcpu-alloc: s91800 r8192 d31080 u131072 alloc=32*4096
[   13.249357] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[   13.249440] Detected VIPT I-cache on CPU0
[   13.254628] CPU features: detected: GIC system register CPU interface
[   13.262455] CPU features: detected: Virtualization Host Extensions
[   13.270000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[   13.278416] alternatives: patching kernel code
[   13.286295] Built 1 zonelists, mobility grouping on.  Total pages: 1027656
[   13.294609] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.dtb_idx=0 androidboot.dtbo_idx=0  androidboot.verifiedbootstate=orange androidboot.serialno=eb8e18cb75f0c6de console=ttyFIQ0 firmware_class.path=/vendor/etc/firmware init=/init rootwait ro loop.max_part=7 androidboot.console=ttyFIQ0 androidboot.wificountrycode=CN androidboot.hardware=rk30board androidboot.boot_devices=fe310000.sdhci,fe330000.nandc,fe2b0000.dwmmc androidboot.selinux=permissive buildvariant=userdebug earlycon=uart8250,mmio32,0xfe660000
[   13.351856] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[   13.361790] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[   13.371171] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[   13.411121] software IO TLB: mapped [mem 0x00000000e7d15000-0x00000000ebd15000] (64MB)
[   13.473022] Memory: 3981268K/4175872K available (19774K kernel code, 4216K rwdata, 8356K rodata, 1344K init, 2187K bss, 186412K reserved, 8192K cma-reserved)
[   13.489346] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[   13.497544] rcu: Preemptible hierarchical RCU implementation.
[   13.504611] rcu: \x09RCU event tracing is enabled.
[   13.510339] rcu: \x09RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[   13.518258] \x09Trampoline variant of Tasks RCU enabled.
[   13.524556] \x09Tracing variant of Tasks RCU enabled.
[   13.530569] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[   13.539632] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[   13.551808] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[   13.560292] GICv3: GIC: Using split EOI/Deactivate mode
[   13.566799] GICv3: 320 SPIs implemented
[   13.571764] GICv3: 0 Extended SPIs implemented
[   13.577431] GICv3: Distributor has no Range Selector support
[   13.584404] GICv3: 16 PPIs implemented
[   13.589308] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
[   13.597728] ITS [mem 0xfd440000-0xfd45ffff]
[   13.603144] ITS@0x00000000fd440000: allocated 8192 Devices @2810000 (indirect, esz 8, psz 64K, shr 0)
[   13.614052] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @2820000 (flat, esz 2, psz 64K, shr 0)
[   13.625981] ITS: using cache flushing for cmd queue
[   13.632505] GICv3: using LPI property table @0x0000000002830000
[   13.639872] GIC: using cache flushing for LPI property table
[   13.646843] GICv3: CPU0: using allocated LPI pending table @0x0000000002840000
[   13.655644] kfence: initialized - using 524288 bytes for 63 objects at 0x(____ptrval____)-0x(____ptrval____)
[   13.698568] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[   13.706031] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[   13.718629] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[   13.729291] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[   13.741341] pid_max: default: 32768 minimum: 301
[   13.747254] LSM: Security Framework initializing
[   13.753120] SELinux:  Initializing.
[   13.757803] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[   13.766703] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[   13.778155] rcu: Hierarchical SRCU implementation.
[   13.784572] Platform MSI: interrupt-controller@fd440000 domain created
[   13.792948] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd440000 domain created
[   13.804355] smp: Bringing up secondary CPUs ...
[   13.818586] Detected VIPT I-cache on CPU1
[   13.818617] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
[   13.818638] GICv3: CPU1: using allocated LPI pending table @0x0000000002850000
[   13.818688] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[   13.827194] Detected VIPT I-cache on CPU2
[   13.827219] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
[   13.827236] GICv3: CPU2: using allocated LPI pending table @0x0000000002860000
[   13.827273] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[   13.835757] Detected VIPT I-cache on CPU3
[   13.835779] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
[   13.835795] GICv3: CPU3: using allocated LPI pending table @0x0000000002870000
[   13.835830] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[   13.835940] smp: Brought up 1 node, 4 CPUs
[   13.932027] SMP: Total of 4 processors activated.
[   13.937960] CPU features: detected: Privileged Access Never
[   13.944842] CPU features: detected: LSE atomic instructions
[   13.951748] CPU features: detected: User Access Override
[   13.958348] CPU features: detected: 32-bit EL0 Support
[   13.964754] CPU features: detected: Common not Private translations
[   13.972397] CPU features: detected: RAS Extension Support
[   13.979086] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[   13.989303] CPU features: detected: CRC32 instructions
[   13.995706] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[   14.004111] CPU features: detected: RCpc load-acquire (LDAPR)
[   14.041340] CPU: All CPU(s) started at EL2
[   14.048340] devtmpfs: initialized
[   14.075915] Trying to unpack rootfs image as initramfs...
[   14.082617] Registered cp15_barrier emulation handler
[   14.082631] Registered setend emulation handler
[   14.082638] KASLR disabled due to lack of seed
[   14.082834] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[   14.111847] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[   14.120536] pinctrl core: initialized pinctrl subsystem
[   14.128301] NET: Registered protocol family 16
[   14.129457] Freeing initrd memory: 1400K
[   14.140502] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[   14.149177] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[   14.158732] audit: initializing netlink subsys (disabled)
[   14.165620] audit: type=2000 audit(0.239:1): state=initialized audit_enabled=0 res=1
[   14.167787] Registered FIQ tty driver
[   14.180046] thermal_sys: Registered thermal governor 'fair_share'
[   14.180052] thermal_sys: Registered thermal governor 'step_wise'
[   14.187518] thermal_sys: Registered thermal governor 'user_space'
[   14.194878] thermal_sys: Registered thermal governor 'power_allocator'
[   14.202665] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[   14.220203] cpuidle: using governor menu
[   14.225682] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[   14.234036] ASID allocator initialised with 65536 entries
[   14.243185] ramoops: dmesg-0\x090x20000@0x0000000000110000
[   14.249729] ramoops: console\x090x80000@0x0000000000130000
[   14.256249] ramoops: pmsg\x090x50000@0x00000000001b0000
[   14.262949] printk: console [ramoops-1] enabled
[   14.268933] pstore: Registered ramoops as persistent store backend
[   14.276497] ramoops: using 0xf0000@0x110000, ecc: 0
[   14.324836] rockchip-gpio fdd60000.gpio0: probed /pinctrl/gpio0@fdd60000
[   14.333509] rockchip-gpio fe740000.gpio1: probed /pinctrl/gpio1@fe740000
[   14.342123] rockchip-gpio fe750000.gpio2: probed /pinctrl/gpio2@fe750000
[   14.350802] rockchip-gpio fe760000.gpio3: probed /pinctrl/gpio3@fe760000
[   14.359476] rockchip-gpio fe770000.gpio4: probed /pinctrl/gpio4@fe770000
[   14.367724] rockchip-pinctrl pinctrl: probed pinctrl
[   14.396188] fiq_debugger fiq_debugger.0: IRQ fiq not found
[   14.403036] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[   14.410119] fiq_debugger_probe: could not install nmi irq handler
[   14.417667] printk: console [ttyFIQ0] enabled
[   14.428258] printk: bootconsole [uart8250] disabled
[   14.434584] Registered fiq debugger ttyFIQ0
[   14.435405] vcc3v3_sys: supplied by dc_12v
[   14.435710] vcc5v0_sys: supplied by dc_12v
[   14.436024] vcc3v3_lcd0_n: supplied by vcc3v3_sys
[   14.436332] vcc3v3_lcd1_n: supplied by vcc3v3_sys
[   14.436978] rockchip-pinctrl pinctrl: unable to find group for node gpiopower-pwr
[   14.436999] reg-fixed-voltage: probe of gpiotest-regulator failed with error -22
[   14.437410] iommu: Default domain type: Translated
[   14.440758] init adp5585_i2c_init
[   14.441218] SCSI subsystem initialized
[   14.441279] libata version 3.00 loaded.
[   14.441460] usbcore: registered new interface driver usbfs
[   14.441511] usbcore: registered new interface driver hub
[   14.441783] usbcore: registered new device driver usb
[   14.442265] mc: Linux media interface: v0.10
[   14.442301] videodev: Linux video capture interface: v2.00
[   14.442383] pps_core: LinuxPPS API ver. 1 registered
[   14.442394] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   14.442414] PTP clock support registered
[   14.443075] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[   14.443140] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[   14.445257] Advanced Linux Sound Architecture Driver Initialized.
[   14.445719] Bluetooth: Core ver 2.22
[   14.445769] NET: Registered protocol family 31
[   14.445779] Bluetooth: HCI device and connection manager initialized
[   14.445799] Bluetooth: HCI socket layer initialized
[   14.445811] Bluetooth: L2CAP socket layer initialized
[   14.445835] Bluetooth: SCO socket layer initialized
[   14.446085] [BT_RFKILL]: Enter rfkill_rk_init
[   14.446097] [WLAN_RFKILL]: Enter rfkill_wlan_init
[   14.446513] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[   14.446558] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6398s
[   14.446568] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[   14.446577] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[   14.446617] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 124, flags = 0.
[   14.446632] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[   14.446641] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[   14.446651] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[   14.446659] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[   14.447217] rockchip-cpuinfo cpuinfo: SoC\x09\x09: 35662000
[   14.447232] rockchip-cpuinfo cpuinfo: Serial\x09\x09: 35e261fa0f931014
[   14.448172] clocksource: Switched to clocksource arch_sys_counter
[   14.518656] VFS: Disk quotas dquot_6.6.0
[   14.518731] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   14.520672] NET: Registered protocol family 2
[   14.520918] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[   14.522570] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[   14.522630] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[   14.522870] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
[   14.523265] TCP: Hash tables configured (established 32768 bind 32768)
[   14.523386] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[   14.523446] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[   14.523606] NET: Registered protocol family 1
[   14.524450] PCI: CLS 0 bytes, default 64
[   14.527248] rockchip-thermal fe710000.tsadc: tsadc is probed successfully!
[   14.528495] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available
[   14.530555] Initialise system trusted keyrings
[   14.530823] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[   14.535312] utf8_selftest: All 154 tests passed
[   14.536089] Key type cifs.idmap registered
[   14.536110] ntfs: driver 2.1.32 [Flags: R/O].
[   14.536246] fuse: init (API version 7.32)
[   14.565591] Key type asymmetric registered
[   14.565610] Asymmetric key parser 'x509' registered
[   14.565656] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[   14.565669] io scheduler mq-deadline registered
[   14.565678] io scheduler kyber registered
[   14.565786] io scheduler bfq registered
[   14.566569] rockchip-csi2-dphy-hw fe870000.csi2-dphy-hw: csi2 dphy hw probe successfully!
[   14.567379] rockchip-csi2-dphy csi2-dphy1: csi2 dphy1 probe successfully!
[   14.579343] pwm-backlight backlight: supply power not found, using dummy regulator
[   14.580025] iep: Module initialized.
[   14.580099] mpp_service mpp-srv: unknown mpp version for missing VCS info
[   14.580112] mpp_service mpp-srv: probe start
[   14.582485] mpp_vdpu2 fdea0400.vdpu: Adding to iommu group 1
[   14.582707] mpp_vdpu2 fdea0400.vdpu: probe device
[   14.583239] mpp_vdpu2 fdea0400.vdpu: probing finish
[   14.583761] mpp_vepu2 fdee0000.vepu: Adding to iommu group 3
[   14.583946] mpp_vepu2 fdee0000.vepu: probing start
[   14.584423] mpp_vepu2 fdee0000.vepu: probing finish
[   14.584995] mpp-iep2 fdef0000.iep: Adding to iommu group 4
[   14.585182] mpp-iep2 fdef0000.iep: probe device
[   14.585478] mpp-iep2 fdef0000.iep: allocate roi buffer failed
[   14.585709] mpp-iep2 fdef0000.iep: probing finish
[   14.586172] mpp_jpgdec fded0000.jpegd: Adding to iommu group 2
[   14.586352] mpp_jpgdec fded0000.jpegd: probe device
[   14.586847] mpp_jpgdec fded0000.jpegd: probing finish
[   14.588668] mpp_service mpp-srv: probe success
[   14.594293] dma-pl330 fe530000.dmac: Loaded driver for PL330 DMAC-241330
[   14.594317] dma-pl330 fe530000.dmac: \x09DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[   14.596419] dma-pl330 fe550000.dmac: Loaded driver for PL330 DMAC-241330
[   14.596436] dma-pl330 fe550000.dmac: \x09DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[   14.596836] rockchip-pvtm fde00000.pvtm: pvtm@0 probed
[   14.596999] rockchip-pvtm fde80000.pvtm: pvtm@1 probed
[   14.597126] rockchip-pvtm fde90000.pvtm: pvtm@2 probed
[   14.597777] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[   14.598928] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
[   14.599348] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[   14.600442] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 71, base_baud = 1500000) is a 16550A
[   14.601253] fe670000.serial: ttyS3 at MMIO 0xfe670000 (irq = 72, base_baud = 1500000) is a 16550A
[   14.601860] fe6a0000.serial: ttyS6 at MMIO 0xfe6a0000 (irq = 73, base_baud = 1500000) is a 16550A
[   14.602385] fe6b0000.serial: ttyS7 at MMIO 0xfe6b0000 (irq = 74, base_baud = 1500000) is a 16550A
[   14.602918] fe6d0000.serial: ttyS9 at MMIO 0xfe6d0000 (irq = 75, base_baud = 1500000) is a 16550A
[   14.604935] random: crng init done
[   14.606119] rockchip-vop2 fe040000.vop: Adding to iommu group 8
[   14.616301] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x2a, primary plane phy id: 5
[   14.616331] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x15, primary plane phy id: 4
[   14.616344] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x0, primary plane phy id: -1
[   14.617178] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops)
[   14.617496] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[   14.618136] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[   14.618444] dwhdmi-rockchip fe0a0000.hdmi: IRQ index 1 not found
[   14.618927] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops)
[   14.619032] dw-mipi-dsi-rockchip fe060000.dsi: failed to find panel or bridge: -517
[   14.630643] cacheinfo: Unable to detect cache hierarchy for CPU 0
[   14.637726] brd: module loaded
[   14.648864] loop: module loaded
[   14.649291] zram: Added device: zram0
[   14.649660] system_heap: orders[0] = 6
[   14.649672] system_heap: orders[1] = 4
[   14.649680] system_heap: orders[2] = 0
[   14.650616] SCSI Media Changer driver v0.25
[   14.651626] ahci fc800000.sata: supply ahci not found, using dummy regulator
[   14.651785] ahci fc800000.sata: supply phy not found, using dummy regulator
[   14.651925] ahci fc800000.sata: supply target not found, using dummy regulator
[   14.652062] ahci fc800000.sata: forcing port_map 0x0 -> 0x1
[   14.652107] ahci fc800000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[   14.652124] ahci fc800000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
[   14.652143] ahci fc800000.sata: port 0 is not capable of FBS
[   14.653175] scsi host0: ahci
[   14.653472] ata1: SATA max UDMA/133 mmio [mem 0xfc800000-0xfc800fff] port 0x100 irq 19
[   14.656150] rockchip-spi fe620000.spi: probed, poll=0, rsd=0, cs-inactive=0, ready=0
[   14.657598] rockchip-spi fe630000.spi: probed, poll=0, rsd=0, cs-inactive=0, ready=0
[   14.658894] rockchip-spi fe640000.spi: probed, poll=0, rsd=0, cs-inactive=0, ready=0
[   14.659207] register spi return v = :0
[   14.660357] tun: Universal TUN/TAP device driver, 1.6
[   14.660550] CAN device driver interface
[   14.662590] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found
[   14.662813] rk_gmac-dwmac fe010000.ethernet: no regulator found
[   14.662828] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input).
[   14.662839] rk_gmac-dwmac fe010000.ethernet: TX delay(0x27).
[   14.662849] rk_gmac-dwmac fe010000.ethernet: RX delay(0xc).
[   14.662865] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no).
[   14.662904] rk_gmac-dwmac fe010000.ethernet: clock input from PHY
[   14.663164] rk_gmac-dwmac fe010000.ethernet: init for RGMII
[   14.663475] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[   14.663490] rk_gmac-dwmac fe010000.ethernet: \x09DWMAC4/5
[   14.663503] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported
[   14.663513] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported
[   14.663521] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported
[   14.663529] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported
[   14.663610] rk_gmac-dwmac fe010000.ethernet: TSO supported
[   14.663621] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[   14.663632] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled
[   14.663642] rk_gmac-dwmac fe010000.ethernet: Using 32 bits DMA width
[   14.795105] mdio_bus stmmac-1: MDIO device at address 0 is missing.
[   14.796384] PPP generic driver version 2.4.2
[   14.796599] PPP BSD Compression module registered
[   14.796612] PPP Deflate Compression module registered
[   14.796639] PPP MPPE Compression module registered
[   14.796650] NET: Registered protocol family 24
[   14.796682] PPTP driver version 0.8.5
[   14.797009] usbcore: registered new interface driver catc
[   14.797060] usbcore: registered new interface driver kaweth
[   14.797072] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   14.797114] usbcore: registered new interface driver pegasus
[   14.797158] usbcore: registered new interface driver rtl8150
[   14.797204] usbcore: registered new interface driver r8152
[   14.797214] hso: drivers/net/usb/hso.c: Option Wireless
[   14.797285] usbcore: registered new interface driver hso
[   14.797329] usbcore: registered new interface driver asix
[   14.797373] usbcore: registered new interface driver ax88179_178a
[   14.797417] usbcore: registered new interface driver cdc_ether
[   14.797466] usbcore: registered new interface driver cdc_eem
[   14.797511] usbcore: registered new interface driver dm9601
[   14.797558] usbcore: registered new interface driver smsc75xx
[   14.797613] usbcore: registered new interface driver smsc95xx
[   14.797662] usbcore: registered new interface driver gl620a
[   14.797713] usbcore: registered new interface driver net1080
[   14.797757] usbcore: registered new interface driver plusb
[   14.797802] usbcore: registered new interface driver rndis_host
[   14.797846] usbcore: registered new interface driver cdc_subset
[   14.797895] usbcore: registered new interface driver zaurus
[   14.797940] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   14.797988] usbcore: registered new interface driver int51x1
[   14.798032] usbcore: registered new interface driver kalmia
[   14.798075] usbcore: registered new interface driver ipheth
[   14.798121] usbcore: registered new interface driver sierra_net
[   14.798206] usbcore: registered new interface driver cx82310_eth
[   14.798259] usbcore: registered new interface driver cdc_ncm
[   14.798303] usbcore: registered new interface driver qmi_wwan_q
[   14.798353] usbcore: registered new interface driver cdc_mbim
[   14.810556] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   14.810585] ehci-pci: EHCI PCI platform driver
[   14.810685] ehci-platform: EHCI generic platform driver
[   14.811170] phy phy-fe8b0000.usb2-phy.4: illegal mode
[   14.813223] ehci-platform fd800000.usb: EHCI Host Controller
[   14.813471] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 1
[   14.813618] ehci-platform fd800000.usb: irq 20, io mem 0xfd800000
[   14.824873] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00
[   14.825056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[   14.825070] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.825079] usb usb1: Product: EHCI Host Controller
[   14.825088] usb usb1: Manufacturer: Linux 5.10.157 ehci_hcd
[   14.825097] usb usb1: SerialNumber: fd800000.usb
[   14.825574] hub 1-0:1.0: USB hub found
[   14.825617] hub 1-0:1.0: 1 port detected
[   14.828339] ehci-platform fd880000.usb: EHCI Host Controller
[   14.828547] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 2
[   14.828656] ehci-platform fd880000.usb: irq 22, io mem 0xfd880000
[   14.841514] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00
[   14.841685] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[   14.841698] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.841708] usb usb2: Product: EHCI Host Controller
[   14.841717] usb usb2: Manufacturer: Linux 5.10.157 ehci_hcd
[   14.841725] usb usb2: SerialNumber: fd880000.usb
[   14.842162] hub 2-0:1.0: USB hub found
[   14.842206] hub 2-0:1.0: 1 port detected
[   14.842956] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   14.842985] ohci-platform: OHCI generic platform driver
[   14.843320] phy phy-fe8b0000.usb2-phy.4: illegal mode
[   14.843335] ohci-platform fd840000.usb: Generic Platform OHCI controller
[   14.843523] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 3
[   14.843640] ohci-platform fd840000.usb: irq 21, io mem 0xfd840000
[   14.902346] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[   14.902361] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.902371] usb usb3: Product: Generic Platform OHCI controller
[   14.902380] usb usb3: Manufacturer: Linux 5.10.157 ohci_hcd
[   14.902389] usb usb3: SerialNumber: fd840000.usb
[   14.902848] hub 3-0:1.0: USB hub found
[   14.902892] hub 3-0:1.0: 1 port detected
[   14.903454] ohci-platform fd8c0000.usb: Generic Platform OHCI controller
[   14.903642] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4
[   14.903758] ohci-platform fd8c0000.usb: irq 23, io mem 0xfd8c0000
[   14.962346] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[   14.962360] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.962370] usb usb4: Product: Generic Platform OHCI controller
[   14.962379] usb usb4: Manufacturer: Linux 5.10.157 ohci_hcd
[   14.962388] usb usb4: SerialNumber: fd8c0000.usb
[   14.962834] hub 4-0:1.0: USB hub found
[   14.962877] hub 4-0:1.0: 1 port detected
[   14.964232] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   14.964463] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
[   14.964577] ata1: SATA link down (SStatus 0 SControl 300)
[   14.964611] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000200002010010
[   14.964678] xhci-hcd xhci-hcd.0.auto: irq 88, io mem 0xfd000000
[   14.965027] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[   14.965041] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.965051] usb usb5: Product: xHCI Host Controller
[   14.965060] usb usb5: Manufacturer: Linux 5.10.157 xhci-hcd
[   14.965068] usb usb5: SerialNumber: xhci-hcd.0.auto
[   14.965550] hub 5-0:1.0: USB hub found
[   14.965595] hub 5-0:1.0: 1 port detected
[   14.965927] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[   14.966098] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
[   14.966119] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[   14.966193] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[   14.966322] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[   14.966335] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   14.966345] usb usb6: Product: xHCI Host Controller
[   14.966353] usb usb6: Manufacturer: Linux 5.10.157 xhci-hcd
[   14.966362] usb usb6: SerialNumber: xhci-hcd.0.auto
[   14.966795] hub 6-0:1.0: USB hub found
[   14.966845] hub 6-0:1.0: 1 port detected
[   14.967332] usbcore: registered new interface driver cdc_acm
[   14.967344] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   14.967410] usbcore: registered new interface driver usblp
[   14.967466] usbcore: registered new interface driver cdc_wdm
[   14.967760] usbcore: registered new interface driver uas
[   14.967849] usbcore: registered new interface driver usb-storage
[   14.967899] usbcore: registered new interface driver ums-alauda
[   14.967947] usbcore: registered new interface driver ums-cypress
[   14.967994] usbcore: registered new interface driver ums-datafab
[   14.968040] usbcore: registered new interface driver ums_eneub6250
[   14.968096] usbcore: registered new interface driver ums-freecom
[   14.968146] usbcore: registered new interface driver ums-isd200
[   14.968228] usbcore: registered new interface driver ums-jumpshot
[   14.968279] usbcore: registered new interface driver ums-karma
[   14.968327] usbcore: registered new interface driver ums-onetouch
[   14.968377] usbcore: registered new interface driver ums-sddr09
[   14.968425] usbcore: registered new interface driver ums-sddr55
[   14.968479] usbcore: registered new interface driver ums-usbat
[   14.968577] usbcore: registered new interface driver usbserial_generic
[   14.968608] usbserial: USB Serial support registered for generic
[   14.968661] usbcore: registered new interface driver cp210x
[   14.968688] usbserial: USB Serial support registered for cp210x
[   14.968753] usbcore: registered new interface driver ftdi_sio
[   14.968779] usbserial: USB Serial support registered for FTDI USB Serial Device
[   14.968902] usbcore: registered new interface driver option
[   14.968930] usbserial: USB Serial support registered for GSM modem (1-port)
[   14.969080] usbcore: registered new interface driver trancevibrator
[   14.969986] usbcore: registered new interface driver xpad
[   14.970051] usbcore: registered new interface driver usb_acecad
[   14.970105] usbcore: registered new interface driver aiptek
[   14.970157] usbcore: registered new interface driver gtco
[   14.970218] usbcore: registered new interface driver hanwang
[   14.970271] usbcore: registered new interface driver kbtab
[   14.970397] <<-GTP-INFO->> GTP driver installing...
[   14.972332] i2c /dev entries driver
[   14.974754] **** wyb 2025/6/2 15:58 drivers/mfd/rk808.c rk808_probe 1159
[   14.975721] rk808 0-0020: chip id: 0x8090
[   14.975762] rk808 0-0020: No cache defaults, reading back from HW
[   14.999469] rk808 0-0020: source: on=0x40, off=0x00
[   14.999483] **** wyb 2025/6/2 15:58 drivers/mfd/rk808.c rk817_of_property_prepare 1086
[   14.999497] rk808 0-0020: support dcdc3 fb mode:-22, 0
[   14.999509] rk808 0-0020: support pmic reset mode:0,0
[   15.000534] **** wyb 2025/6/2 15:58 drivers/mfd/rk808.c rk817_pinctrl_init 920
[   15.005422] rk808-regulator rk808-regulator: there is no dvs0 gpio
[   15.005459] rk808-regulator rk808-regulator: there is no dvs1 gpio
[   15.005890] vdd_logic: supplied by vcc3v3_sys
[   15.006943] vdd_gpu: supplied by vcc3v3_sys
[   15.007583] vcc_ddr: supplied by vcc3v3_sys
[   15.008244] vdd_npu: supplied by vcc3v3_sys
[   15.009241] vcc_1v8: supplied by vcc3v3_sys
[   15.009856] vdda0v9_image: supplied by vcc3v3_sys
[   15.011326] vdda_0v9: supplied by vcc3v3_sys
[   15.012480] vdda0v9_pmu: supplied by vcc3v3_sys
[   15.013598] vccio_acodec: supplied by vcc3v3_sys
[   15.015079] vccio_sd: supplied by vcc3v3_sys
[   15.016215] vcc3v3_pmu: supplied by vcc3v3_sys
[   15.017695] vcca_1v8: supplied by vcc3v3_sys
[   15.018833] vcca1v8_pmu: supplied by vcc3v3_sys
[   15.019963] vcca1v8_image: supplied by vcc3v3_sys
[   15.021442] vcc_3v3: supplied by vcc3v3_sys
[   15.022412] vcc3v3_sd: supplied by vcc3v3_sys
[   15.024016] rk817-battery rk817-battery: DMA mask not set
[   15.024161] rk817-battery rk817-battery: fb_temperature missing!
[   15.024178] rk817-battery rk817-battery: zero_reserve_dsoc missing!
[   15.024193] rk817-battery rk817-battery: low_power_sleep missing!
[   15.024204] rk817-battery rk817-battery: battery design_max_voltage missing!
[   15.024214] rk817-battery rk817-battery: not have to register chg psy!
[   15.024223] rk817-battery rk817-battery: not have to register  dc_rpdzkj_psy!
[   15.050758] rk817-bat: initialized yet..
[   15.097395] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[   15.100886] rk817-charger: Failed to locate of_node [id: -1]
[   15.101056] rk817-charger rk817-charger: Failed to find matching dt id
[   15.104276] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
[   15.106429] fan53555-regulator 0-001c: Failed to get chip ID!
[   15.110842] rtc-hym8563 4-0051: could not init device, -6
[   15.112811] rockchip-mipi-csi2-hw fdfb0000.mipi-csi2-hw: enter mipi csi2 hw probe!
[   15.112977] rockchip-mipi-csi2-hw fdfb0000.mipi-csi2-hw: probe success, v4l2_dev:mipi-csi2-hw!
[   15.114542] rkisp_hw fdff0000.rkisp: Adding to iommu group 7
[   15.114858] rkisp_hw fdff0000.rkisp: is_thunderboot: 0
[   15.114873] rkisp_hw fdff0000.rkisp: max input:0x0@0fps
[   15.114905] rkisp_hw fdff0000.rkisp: can't request region for resource [mem 0xfdff0000-0xfdffffff]
[   15.115083] rkisp_hw fdff0000.rkisp: no find phandle sram
[   15.115621] rkisp rkisp-vir0: rkisp driver version: v02.02.02
[   15.115787] rkisp rkisp-vir0: No memory-region-thunderboot specified
[   15.115992] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was not initialized!
[   15.116015] rkisp rkisp-vir0: Entity type for entity rkisp-csi-subdev was not initialized!
[   15.119118] usbcore: registered new interface driver uvcvideo
[   15.119137] USB Video Class driver (1.1.1)
[   15.120246] test_power_init: test power disabled
[   15.121823] device-mapper: uevent: version 1.0.3
[   15.122093] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
[   15.122350] Bluetooth: HCI UART driver ver 2.3
[   15.122364] Bluetooth: HCI UART protocol H4 registered
[   15.123038] cpu cpu0: bin=0
[   15.123088] cpu cpu0: leakage=24
[   15.123132] cpu cpu0: pvtm = 88110, from nvmem
[   15.123150] cpu cpu0: pvtm-volt-sel=2
[   15.123220] cpu cpu0: soc version=0, speed=2
[   15.125633] sdhci: Secure Digital Host Controller Interface driver
[   15.125652] sdhci: Copyright(c) Pierre Ossman
[   15.125660] Synopsys Designware Multimedia Card Interface Driver
[   15.126646] sdhci-pltfm: SDHCI platform and OF driver helper
[   15.127115] dwmmc_rockchip fe000000.dwmmc: No normal pinctrl state
[   15.127136] dwmmc_rockchip fe000000.dwmmc: No idle pinctrl state
[   15.127285] dwmmc_rockchip fe000000.dwmmc: IDMAC supports 32-bit address mode.
[   15.127304] dwmmc_rockchip fe2b0000.dwmmc: No normal pinctrl state
[   15.127320] dwmmc_rockchip fe000000.dwmmc: Using internal DMA controller.
[   15.127323] dwmmc_rockchip fe2b0000.dwmmc: No idle pinctrl state
[   15.127344] dwmmc_rockchip fe000000.dwmmc: Version ID is 270a
[   15.127406] dwmmc_rockchip fe000000.dwmmc: DW MMC controller at irq 53,32 bit host data width,256 deep fifo
[   15.127438] dwmmc_rockchip fe2b0000.dwmmc: IDMAC supports 32-bit address mode.
[   15.127466] dwmmc_rockchip fe2b0000.dwmmc: Using internal DMA controller.
[   15.127482] dwmmc_rockchip fe2b0000.dwmmc: Version ID is 270a
[   15.127527] dwmmc_rockchip fe2b0000.dwmmc: DW MMC controller at irq 54,32 bit host data width,256 deep fifo
[   15.127802] dwmmc_rockchip fe000000.dwmmc: allocated mmc-pwrseq
[   15.127820] mmc_host mmc3: card is non-removable.
[   15.129000] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[   15.129115] SMCCC: SOC_ID: ARCH_FEATURES(ARCH_SOC_ID) returned error: fffffffffffffffd
[   15.130084] cryptodev: driver 1.12 loaded.
[   15.130166] hid: raw HID events driver (C) Jiri Kosina
[   15.133396] usbcore: registered new interface driver usbhid
[   15.133414] usbhid: USB HID core driver
[   15.133750] ashmem: initialized
[   15.138370] optee: probing for conduit method.
[   15.138416] optee: revision 3.13 (b5340fd6)
[   15.138594] mmc_host mmc0: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[   15.138772] optee: dynamic shared memory is enabled
[   15.138958] optee: initialized driver
[   15.139689] rp_power prepare build 8 gpio
[   15.139734] rp_power request pwr_5v_3v3
[   15.139760] success request gpio75 out
[   15.139779] rp_power request led
[   15.139794] success request gpio114 flash
[   15.139813] rp_power request usb_pwr
[   15.139827] success request gpio6 out
[   15.139847] rp_power request usb_rst
[   15.139860] success request gpio8 out
[   15.139987] rp_power request spk_en
[   15.140004] success request gpio148 out
[   15.140024] rp_power request spk_mute
[   15.140039] success request gpio0 out
[   15.140065] rp_power request usb_mode
[   15.140081] success request gpio18 out
[   15.140099] rp_power request Equipment_EN
[   15.140112] success request gpio97 out
[   15.140259] input: gpio_event as /devices/platform/rp_power/input/input1
[   15.140620] input: gpio_event as /devices/platform/rp_power/input/input2
[   15.140770] rpdzkj wake lock
[   15.141452] rp_gpio prepare build 11 gpio
[   15.141662] rp_gpio request gpio1d0
[   15.141687] success request gpio56 out
[   15.141710] rp_gpio request gpio1d1
[   15.141724] success request gpio57 out
[   15.141750] rp_gpio request gpio1d2
[   15.141765] success request gpio58 out
[   15.141787] rp_gpio request gpio1d3
[   15.141801] success request gpio59 out
[   15.141820] rp_gpio request gpio1d4
[   15.141834] success request gpio60 out
[   15.141856] rp_gpio request gpio4a0
[   15.141871] success request gpio128 out
[   15.141896] rp_gpio request gpio4a1
[   15.141911] success request gpio129 out
[   15.141931] rp_gpio request gpio4a2
[   15.141944] success request gpio130 out
[   15.141963] rp_gpio request gpio4a3
[   15.141977] success request gpio131 out
[   15.141996] rp_gpio request gpio1a4
[   15.142009] success request gpio36 out
[   15.142028] rp_gpio request gpio3c1
[   15.142042] success request gpio113 out
[   15.142814] mhi_init Quectel_Linux_PCIE_MHI_Driver_V1.3.1
[   15.143082] sprd_pci_ep_dev_init Quectel_Linux&Android_SPRD_PCIE_Driver_V1.1.8
[   15.143684] sipc: name=sprd,sipc
[   15.143696] sipc: type=1
[   15.143704] sipc: dst =1
[   15.143711] sipc: ep_dev=0
[   15.143718] sipc: smem_type = 0
[   15.144532] sipc: smem_base=0x2c00000, dst_smem_base=0x2c00000, smem_size=0x300000
[   15.144543] sipc: high_offset=0x0n
[   15.144546] smsg_ipc_create: sprd,sipc
[   15.145130] smem_init: pool addr = 0x2c00000, size = 0x300000 added.
[   15.145149] smsg_ipc_smem_init: ring_base = 0x2c00000, ring_size = 0x1000
[   15.146136] spipe_probe!
[   15.146153] spipe: after parse device tree, name=spipe_nr, dst=1, channel=4, ringnr=15,  rxbuf_size=0x1000, txbuf_size=0x1000
[   15.146167] sbuf_host_init: channel 1-4, offset = 0x0!
[   15.146637] smsg_ch_open: channel 1-4 send open msg!
[   15.148705] spipe_probe!
[   15.148722] spipe: after parse device tree, name=sdiag_nr, dst=1, channel=21, ringnr=1,  rxbuf_size=0x8000, txbuf_size=0x40000
[   15.148736] sbuf_host_init: channel 1-21, offset = 0x0!
[   15.149079] smsg_ch_open: channel 1-21 send open msg!
[   15.149205] spipe_probe!
[   15.149218] spipe: after parse device tree, name=stty_nr, dst=1, channel=6, ringnr=32,  rxbuf_size=0x800, txbuf_size=0x800
[   15.149231] sbuf_host_init: channel 1-6, offset = 0x0!
[   15.149603] smsg_ch_open: channel 1-6 send open msg!
[   15.153342] spipe_probe!
[   15.153365] spipe: after parse device tree, name=snv_nr, dst=1, channel=40, ringnr=1,  rxbuf_size=0x1000, txbuf_size=0x40400
[   15.153380] sbuf_host_init: channel 1-40, offset = 0x0!
[   15.153683] smsg_ch_open: channel 1-40 send open msg!
[   15.154399] spool: name=slog_nr, dst=1, channel=5, pre_cfg=0
[   15.154413] spool: tx_num=0, tx_size=0, rx_num=32, rx_size=65536
[   15.154741] smsg_ch_open: channel 1-5 send open msg!
[   15.155410] usbcore: registered new interface driver snd-usb-audio
[   15.157843] rk817-codec rk817-codec: DMA mask not set
[   15.158302] mmc2: SDHCI controller on fe310000.sdhci [fe310000.sdhci] using ADMA
[   15.164548] netem: version 1.3
[   15.164575] u32 classifier
[   15.164584] input device check on
[   15.164591] Actions configured
[   15.165567] xt_time: kernel timezone is -0000
[   15.165693] gre: GRE over IPv4 demultiplexor driver
[   15.165706] IPv4 over IPsec tunneling driver
[   15.166458] Initializing XFRM netlink socket
[   15.166502] IPsec XFRM device driver
[   15.166875] NET: Registered protocol family 10
[   15.167948] Segment Routing with IPv6
[   15.168049] mip6: Mobile IPv6
[   15.168839] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[   15.169658] NET: Registered protocol family 17
[   15.169691] NET: Registered protocol family 15
[   15.169759] Bridge firewalling registered
[   15.169810] can: controller area network core
[   15.169861] NET: Registered protocol family 29
[   15.169872] can: raw protocol
[   15.169885] can: broadcast manager protocol
[   15.169901] can: netlink gateway - max_hops=1
[   15.170290] Bluetooth: RFCOMM TTY layer initialized
[   15.170311] Bluetooth: RFCOMM socket layer initialized
[   15.170352] Bluetooth: RFCOMM ver 1.11
[   15.170371] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   15.170380] Bluetooth: BNEP filters: protocol multicast
[   15.170393] Bluetooth: BNEP socket layer initialized
[   15.170403] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   15.170414] Bluetooth: HIDP socket layer initialized
[   15.170441] l2tp_core: L2TP core driver, V2.0
[   15.170457] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   15.171705] gc2093 2-0037: driver version: 00.01.02
[   15.171853] gc2093 2-0037: Failed to get pwdn-gpios
[   15.171900] gc2093 2-0037: supply dovdd not found, using dummy regulator
[   15.172069] gc2093 2-0037: supply avdd not found, using dummy regulator
[   15.172128] gc2093 2-0037: supply dvdd not found, using dummy regulator
[   15.191835] gc2093 2-0037: i2c read failed at addr: 3f0
[   15.192101] gc2093 2-0037: i2c read failed at addr: 3f1
[   15.192115] gc2093 2-0037: Failed to read sensor id, (-6)
[   15.193533] registered taskstats version 1
[   15.193559] Loading compiled-in X.509 certificates
[   15.193742] Key type .fscrypt registered
[   15.193757] Key type fscrypt-provisioning registered
[   15.194054] pstore: Using crash dump compression: deflate
[   15.195321] rga: rga2, irq = 31, match scheduler
[   15.195957] rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
[   15.195995] rga: rga2 probe successfully
[   15.196377] rga_iommu: IOMMU binding successfully, default mapping core[0x4]
[   15.196704] rga: Module initialized. v1.2.27
[   15.200809] mmc2: Host Software Queue enabled
[   15.200862] mmc2: new HS200 MMC card at address 0001
[   15.201793] mmcblk2: mmc2:0001 SPeMMC 29.0 GiB
[   15.202072] mmcblk2boot0: mmc2:0001 SPeMMC partition 1 4.00 MiB
[   15.202325] mmcblk2boot1: mmc2:0001 SPeMMC partition 2 4.00 MiB
[   15.202692] mmcblk2rpmb: mmc2:0001 SPeMMC partition 3 4.00 MiB, chardev (235:0)
[   15.207131] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15
[   15.277649] vendor storage:20190527 ret = 0
[   15.345277] mmc_host mmc3: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0)
[   15.359049] mpp_rkvenc fdf40000.rkvenc: Adding to iommu group 5
[   15.359322] mpp_rkvenc fdf40000.rkvenc: probing start
[   15.359903] mpp_rkvenc fdf40000.rkvenc: bin=0
[   15.359924] mpp_rkvenc fdf40000.rkvenc: Failed to get leakage
[   15.359978] mpp_rkvenc fdf40000.rkvenc: pvtm = 88110, from nvmem
[   15.359995] mpp_rkvenc fdf40000.rkvenc: pvtm-volt-sel=1
[   15.360254] mpp_rkvenc fdf40000.rkvenc: avs=0
[   15.360394] mpp_rkvenc fdf40000.rkvenc: failed to find power_model node
[   15.360408] mpp_rkvenc fdf40000.rkvenc: failed to initialize power model
[   15.360418] mpp_rkvenc fdf40000.rkvenc: failed to get dynamic-coefficient
[   15.361205] mpp_rkvenc fdf40000.rkvenc: probing finish
[   15.361708] mpp_rkvdec2 fdf80200.rkvdec: Adding to iommu group 6
[   15.361960] mpp_rkvdec2 fdf80200.rkvdec: rkvdec, probing start
[   15.362326] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found!
[   15.362340] rkvdec2_init:1022: No niu aclk reset resource define
[   15.362352] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found!
[   15.362360] rkvdec2_init:1025: No niu hclk reset resource define
[   15.362601] mpp_rkvdec2 fdf80200.rkvdec: bin=0
[   15.362706] mpp_rkvdec2 fdf80200.rkvdec: leakage=46
[   15.362722] mpp_rkvdec2 fdf80200.rkvdec: leakage-volt-sel=0
[   15.362763] mpp_rkvdec2 fdf80200.rkvdec: pvtm = 88110, from nvmem
[   15.362778] mpp_rkvdec2 fdf80200.rkvdec: pvtm-volt-sel=1
[   15.363005] mpp_rkvdec2 fdf80200.rkvdec: avs=0
[   15.363151] mpp_rkvdec2 fdf80200.rkvdec: failed to find power_model node
[   15.363164] mpp_rkvdec2 fdf80200.rkvdec: failed to initialize power model
[   15.363175] mpp_rkvdec2 fdf80200.rkvdec: failed to get dynamic-coefficient
[   15.363306] mpp_rkvdec2 fdf80200.rkvdec: sram_start 0x00000000fdcc0000
[   15.363319] mpp_rkvdec2 fdf80200.rkvdec: rcb_iova 0x0000000010000000
[   15.363328] mpp_rkvdec2 fdf80200.rkvdec: sram_size 45056
[   15.363337] mpp_rkvdec2 fdf80200.rkvdec: rcb_size 65536
[   15.363347] mpp_rkvdec2 fdf80200.rkvdec: min_width 512
[   15.363413] mpp_rkvdec2 fdf80200.rkvdec: link mode probe finish
[   15.363493] mpp_rkvdec2 fdf80200.rkvdec: probing finish
[   15.365053] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 142.
[   15.365098] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 133.
[   15.365116] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 134.
[   15.365133] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 137.
[   15.365139] mali fde60000.gpu: Kernel DDK version g18p0-01eac0
[   15.365214] [BT_RFKILL]: Request irq for bt wakeup host
[   15.365329] [BT_RFKILL]: ** disable irq
[   15.365451] [BT_RFKILL]: bt_default device registered.
[   15.365729] mali fde60000.gpu: bin=0
[   15.365778] mali fde60000.gpu: leakage=6
[   15.365821] mali fde60000.gpu: pvtm = 88110, from nvmem
[   15.365841] mali fde60000.gpu: pvtm-volt-sel=2
[   15.365860] mali fde60000.gpu: soc version=0, speed=2
[   15.365926] rockchip-iodomain fdc20000.syscon:io-domains: pmuio2(3300000 uV) supplied by vcc3v3_pmu
[   15.366077] rockchip-iodomain fdc20000.syscon:io-domains: vccio1(3000000 uV) supplied by vccio_acodec
[   15.366270] rockchip-iodomain fdc20000.syscon:io-domains: vccio3(3300000 uV) supplied by vccio_sd
[   15.366420] rockchip-iodomain fdc20000.syscon:io-domains: vccio4(3300000 uV) supplied by vcc_3v3
[   15.366503] rockchip-iodomain fdc20000.syscon:io-domains: vccio5(3300000 uV) supplied by vcc_3v3
[   15.366518] mali fde60000.gpu: avs=0
[   15.366552] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 143; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[   15.366655] rockchip-iodomain fdc20000.syscon:io-domains: vccio6(1800000 uV) supplied by vcc_1v8
[   15.366737] rockchip-iodomain fdc20000.syscon:io-domains: vccio7(3300000 uV) supplied by vcc_3v3
[   15.367187] mali fde60000.gpu: GPU identified as 0x2 arch 7.4.0 r1p0 status 0
[   15.367273] mali fde60000.gpu: No priority control manager is configured
[   15.367604] mali fde60000.gpu: No memory group manager is configured
[   15.369180] mali fde60000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[   15.370904] mali fde60000.gpu: Probed as mali0
[   15.372074] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x2a, primary plane phy id: 5
[   15.372102] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp1 assign plane mask: 0x15, primary plane phy id: 4
[   15.372115] rockchip-vop2 fe040000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x0, primary plane phy id: -1
[   15.372937] rockchip-drm display-subsystem: bound fe040000.vop (ops vop2_component_ops)
[   15.373249] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[   15.374542] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver
[   15.375286] dwhdmi-rockchip fe0a0000.hdmi: IRQ index 1 not found
[   15.376416] input: hdmi_cec_key as /devices/platform/fe0a0000.hdmi/dw-hdmi-cec.3.auto/input/input3
[   15.377432] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops dw_hdmi_rockchip_ops)
[   15.377610] rockchip-drm display-subsystem: bound fe060000.dsi (ops dw_mipi_dsi_rockchip_ops)
[   15.378969] rockchip-drm display-subsystem: route-hdmi: failed to get logo,offset
[   15.395012] mmc3: queuing unknown CIS tuple 0x80 (2 bytes)
[   15.397031] mmc3: queuing unknown CIS tuple 0x80 (3 bytes)
[   15.398920] mmc3: queuing unknown CIS tuple 0x80 (3 bytes)
[   15.402324] mmc3: queuing unknown CIS tuple 0x80 (7 bytes)
[   15.406187] mmc3: queuing unknown CIS tuple 0x81 (9 bytes)
[   15.447247] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device
[   15.448308] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[   15.449102] input: adc-keys as /devices/platform/adc-keys/input/input4
[   15.454111] rk817-codec rk817-codec: rk817_probe: chip_name:0x80, chip_ver:0x95
[   15.467245] mmc_host mmc3: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
[   15.470564] rk808-rtc rk808-rtc: registered as rtc0
[   15.472426] rk808-rtc rk808-rtc: setting system clock to 2017-08-04T09:00:16 UTC (1501837216)
[   15.475051] rockchip_headset rk-headset: Can not read property headset_gpio
[   15.475123] rockchip_headset: probe of rk-headset failed with error -2
[   15.475811] RKNPU fde40000.npu: Adding to iommu group 0
[   15.476456] RKNPU fde40000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[   15.476758] RKNPU fde40000.npu: can't request region for resource [mem 0xfde40000-0xfde4ffff]
[   15.477388] [drm] Initialized rknpu 0.9.2 20231018 for fde40000.npu on minor 1
[   15.478035] RKNPU fde40000.npu: bin=0
[   15.478082] RKNPU fde40000.npu: leakage=3
[   15.478125] RKNPU fde40000.npu: pvtm = 88110, from nvmem
[   15.478145] RKNPU fde40000.npu: pvtm-volt-sel=2
[   15.478191] RKNPU fde40000.npu: soc version=0, speed=2
[   15.478919] RKNPU fde40000.npu: avs=0
[   15.479128] RKNPU fde40000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[   15.479615] RKNPU fde40000.npu: failed to find power_model node
[   15.479628] RKNPU fde40000.npu: RKNPU: failed to initialize power model
[   15.479639] RKNPU fde40000.npu: RKNPU: failed to get dynamic-coefficient
[   15.480958] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   15.482012] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   15.482167] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   15.482184] cfg80211: failed to load regulatory.db
[   15.483206] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[   15.483743] rockchip-suspend not set sleep-mode-config for mem-lite
[   15.483753] rockchip-suspend not set wakeup-config for mem-lite
[   15.483764] rockchip-suspend not set sleep-mode-config for mem-ultra
[   15.483772] rockchip-suspend not set wakeup-config for mem-ultra
[   15.484997] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 410; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '17:49:57', on 'Jun  2 2025'.
[   15.485479] Mali:
[   15.485482] Mali device driver loaded
[   15.485506] rkisp rkisp-vir0: clear unready subdev num: 1
[   15.486105] rkisp-vir0: update sensor failed
[   15.486123] ALSA device list:
[   15.486133] #0: rockchip,hdmi
[   15.486142] #1: rockchip,rk809-codec
[   15.486761] Freeing unused kernel memory: 1344K
[   15.511657] Run /init as init process
[   15.511673] with arguments:
[   15.511676] /init
[   15.511679] with environment:
[   15.511681] HOME=/
[   15.511684] TERM=linux
[   15.511686] storagemedia=emmc
[   15.511689] buildvariant=userdebug
[   15.514907] init: init first stage started!
[   15.515143] init: Unable to open /lib/modules, skipping module loading.
[   15.515522] init: Copied ramdisk prop to /second_stage_resources/system/etc/ramdisk/build.prop
[   15.516020] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
[   15.517873] init: Using Android DT directory /proc/device-tree/firmware/android/
[   15.517960] init: Failed to read vbmeta partitions.
[   15.597429] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/by-name/metadata
[   15.597583] init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46
[   15.598102] EXT4-fs (mmcblk2p11): Ignoring removed nomblk_io_submit option
[   15.601829] dwmmc_rockchip fe000000.dwmmc: Successfully tuned phase to 105
[   15.605906] mmc3: new ultra high speed SDR104 SDIO card at address 0001
[   15.607707] EXT4-fs (mmcblk2p11): recovery complete
[   15.607863] EXT4-fs (mmcblk2p11): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit[   15.608012] init: [libfs_mgr]check_fs(): mount(/dev/block/by-name/metadata,/metadata,ext4)=0: Success
[   15.610001] init: [libfs_mgr]umount_retry(): unmount(/metadata) succeeded
[   15.613133] EXT4-fs (mmcblk2p11): mounted filesystem with ordered data mode. Opts: discard
[   15.627282] request_module fs-erofs succeeded, but still no fs?
[   15.633975] EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier=1
[   15.642530] EXT4-fs (dm-3): mounted filesystem without journal. Opts: barrier=1
[   15.646253] EXT4-fs (dm-5): mounted filesystem without journal. Opts: barrier=1
[   15.649907] EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier=1
[   15.653571] EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier=1
[   15.657243] EXT4-fs (dm-4): mounted filesystem without journal. Opts: barrier=1
[   15.660806] EXT4-fs (dm-6): mounted filesystem without journal. Opts: barrier=1
[   15.665210] EXT4-fs (dm-7): mounted filesystem without journal. Opts: barrier=1
[   15.692251] printk: init: 38 output lines suppressed due to ratelimiting
[   15.854913] init: Opening SELinux policy
[   15.858051] init: Falling back to standard signature check. TODO implementent support for fsverity SEPolicy.
[   15.858215] init: Error: Apex SEPolicy failed signature check
[   15.858254] init: Loading APEX Sepolicy from /system/etc/selinux/apex/SEPolicy.zip
[   15.858315] init: Failed to open package /system/etc/selinux/apex/SEPolicy.zip: No such file or directory
[   15.868036] init: Loading SELinux policy
[   15.893594] SELinux:  Permission bpf in class capability2 not defined in policy.
[   15.893628] SELinux:  Permission checkpoint_restore in class capability2 not defined in policy.
[   15.893661] SELinux:  Permission bpf in class cap2_userns not defined in policy.
[   15.893669] SELinux:  Permission checkpoint_restore in class cap2_userns not defined in policy.
[   15.893811] SELinux: the above unknown classes and permissions will be denied
[   15.900727] SELinux:  policy capability network_peer_controls=1
[   15.900758] SELinux:  policy capability open_perms=1
[   15.900767] SELinux:  policy capability extended_socket_class=1
[   15.900775] SELinux:  policy capability always_check_network=0
[   15.900782] SELinux:  policy capability cgroup_seclabel=0
[   15.900790] SELinux:  policy capability nnp_nosuid_transition=1
[   15.900797] SELinux:  policy capability genfs_seclabel_symlinks=0
[   15.900804] SELinux:  policy capability ioctl_skip_cloexec=0
[   16.001617] usb 1-1: new high-speed USB device number 2 using ehci-platform
[   16.149898] usb 1-1: New USB device found, idVendor=1d6b, idProduct=8030, bcdDevice= 3.10
[   16.149926] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   16.149936] usb 1-1: Product: Artosyn in HS Mode
[   16.149945] usb 1-1: Manufacturer: Artosyn
[   16.149954] usb 1-1: SerialNumber: 64DA50518032
[   16.151578] usbhid 1-1:1.0: couldn't find an input interrupt endpoint
[   16.181718] audit: type=1403 audit(1501837217.206:2): auid=4294967295 ses=4294967295 lsm=selinux res=1
[   16.200102] selinux: SELinux: Loaded file_contexts
[   16.200146] selinux:
[   16.244540] init: init second stage started!
[   16.310025] init: Using Android DT directory /proc/device-tree/firmware/android/
[   16.316574] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory
[   16.328257] init: Setting product property ro.product.brand to 'rockchip' (from ro.product.product.brand)
[   16.328346] init: Setting product property ro.product.device to 'rk3566_t' (from ro.product.product.device)
[   16.328411] init: Setting product property ro.product.manufacturer to 'rockchip' (from ro.product.product.manufacturer)
[   16.328472] init: Setting product property ro.product.model to 'rk3566_t' (from ro.product.product.model)
[   16.328556] init: Setting product property ro.product.name to 'rk3566_t' (from ro.product.product.name)
[   16.328646] init: Setting property 'ro.build.fingerprint' to 'rockchip/rk3566_t/rk3566_t:13/TQ3C.230805.001.B2/eng.rootro.20250602.175345:userdebug/release-keys'
[   16.328728] init: Setting property 'ro.product.cpu.abilist' to 'arm64-v8a,armeabi-v7a,armeabi'
[   16.390406] audit: type=1107 audit(1501837217.413:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc:  denied  { read } for property=persist.sys.adb_enable pid=0 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_prop:s0 tclass=file permissive=1'
[   16.390950] audit: type=1107 audit(1501837217.413:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc:  denied  { read } for property=flash.success pid=0 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1'
[   16.412546] init: rpdzkj read rpdzkj_config dts,ro.surface_flinger.primary_display_orientation=90
[   16.413761] init: rpdzkj read rpdzkj_config dts,ro.sf.csi.camera.rotation=0
[   16.414532] init: rpdzkj read rpdzkj_config dts,ro.sf.usb.camera.rotation=0
[   16.415346] init: rpdzkj read rpdzkj_config dts,ro.sf.csi.camera.facing=0
[   16.416294] init: rpdzkj read rpdzkj_config dts,ro.sf.usb.camera.facing=0
[   16.417059] init: rpdzkj read rpdzkj_config dts,ro.sf.lcd_density=320
[   16.417683] init: rpdzkj read rpdzkj_config dts,persist.sys.timezone=Asia/Shanghai
[   16.418401] audit: type=1107 audit(1501837217.443:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc:  denied  { set } for property=persist.sys.timezone pid=151 uid=0 gid=0 scontext=u:r:vendor_init:s0 tcontext=u:object_r:exported_system_prop:s0 tclass=property_service permissive=1'
[   16.418804] init: rpdzkj read rpdzkj_config dts,ro.rpdzkj.no.statusbar=false
[   16.419432] init: rpdzkj read rpdzkj_config dts,rpdzkj.default.launcher=true
[   16.420023] init: rpdzkj read rpdzkj_config dts,rpdzkj.has.root=true
[   16.466336] cgroup: Unknown subsys name 'schedtune'
[   16.517553] linkerconfig: Unable to access VNDK APEX at path: /apex/com.android.vndk.v33: No such file or directory
[   16.517674] linkerconfig: Unable to access VNDK APEX at path: /apex/com.android.vndk.v33: No such file or directory
[   16.569975] ueventd: ueventd started!
[   16.575401] selinux: SELinux: Loaded file_contexts
[   16.575447] selinux:
[   16.576283] ueventd: Parsing file /system/etc/ueventd.rc...
[   16.577225] ueventd: Added '/vendor/etc/ueventd.rc' to import list
[   16.577285] ueventd: Added '/odm/etc/ueventd.rc' to import list
[   16.578068] ueventd: Parsing file /vendor/etc/ueventd.rc...
[   16.580150] ueventd: Parsing file /odm/etc/ueventd.rc...
[   16.580263] ueventd: Unable to read config file '/odm/etc/ueventd.rc': open() failed: No such file or directory
[   16.617380] apexd: Bootstrap subcommand detected
[   16.618500] apexd: ActivateFlattenedApex
[   16.618551] apexd: Scanning /system/apex
[   16.620424] apexd: Bind mounting /system/apex/com.android.adbd onto /apex/com.android.adbd
[   16.621551] apexd: Bind mounting /system/apex/com.android.adservices onto /apex/com.android.adservices
[   16.622653] apexd: Bind mounting /system/apex/com.android.appsearch onto /apex/com.android.appsearch
[   16.623732] apexd: Bind mounting /system/apex/com.android.art onto /apex/com.android.art
[   16.624887] apexd: Bind mounting /system/apex/com.android.btservices onto /apex/com.android.btservices
[   16.626174] apexd: Bind mounting /system/apex/com.android.conscrypt onto /apex/com.android.conscrypt
[   16.627312] apexd: Bind mounting /system/apex/com.android.extservices onto /apex/com.android.extservices
[   16.662898] printk: apexd: 25 output lines suppressed due to ratelimiting
[   16.781062] audit: type=1400 audit(1501837217.803:6): avc:  denied  { mounton } for  pid=1 comm="init" path="/sys/kernel/debug/tracing" dev="debugfs" ino=285 scontext=u:r:init:s0 tcontext=u:object_r:debugfs_tracing_debug:s0 tclass=dir permissive=1
[   16.793113] audit: type=1400 audit(1501837217.816:7): avc:  denied  { getattr } for  pid=151 comm="init" path="/sys/kernel/debug/tracing/trace_marker" dev="tracefs" ino=9097 scontext=u:r:vendor_init:s0 tcontext=u:object_r:debugfs_trace_marker:s0 tclass=file permissive=1
[   17.829767] ueventd: Coldboot took 1.248 seconds
[   17.958905] Registered swp emulation handler
[   18.082179] logd.auditd: start
[   18.082235] logd.klogd: 4037401780
[   18.098332] logd: Loaded bug_map file: /system_ext/etc/selinux/bug_map
[   18.098682] logd: Loaded bug_map file: /vendor/etc/selinux/selinux_denial_metadata
[   18.099567] logd: Loaded bug_map file: /system/etc/selinux/bug_map
[   18.285320] EXT4-fs (mmcblk2p10): Ignoring removed nomblk_io_submit option
[   18.291099] EXT4-fs (mmcblk2p10): recovery complete
[   18.291297] EXT4-fs (mmcblk2p10): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit[   18.342574] e2fsck: e2fsck 1.46.2 (28-Feb-2021)
[   18.348255] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[   18.351596] e2fsck: Pass 2: Checking directory structure
[   18.353656] e2fsck: Pass 3: Checking directory connectivity
[   18.353944] e2fsck: Pass 4: Checking reference counts
[   18.361030] e2fsck: Pass 5: Checking group summary information
[   18.383711] e2fsck: /dev/block/by-name/cache: 18/98304 files (0.0% non-contiguous), 16421/98304 blocks
[   18.390663] EXT4-fs (mmcblk2p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[   18.511683] PELT half life is set to 8ms
[   18.571963] type=1400 audit(1501837219.593:8): avc: denied { write } for comm="tee-supplicant" name="property_service" dev="tmpfs" ino=337 scontext=u:r:tee:s0 tcontext=u:object_r:property_socket:s0 tclass=sock_file permissive=1
[   18.572249] type=1400 audit(1501837219.593:9): avc: denied { connectto } for comm="tee-supplicant" path="/dev/socket/property_service" scontext=u:r:tee:s0 tcontext=u:r:init:s0 tclass=unix_stream_socket permissive=1
[   18.572474] type=1107 audit(1501837219.593:10): uid=0 auid=4294967295 ses=4294967295 subj=u:r:init:s0 msg='avc: denied { set } for property=vendor.security.tee_supplicant pid=205 uid=0 gid=0 scontext=u:r:tee:s0 tcontext=u:object_r:vendor_default_prop:s0 tclass=property_service permissive=1'
[   18.687789] vdc: Waited 0ms for vold
[   18.689465] Checkpoint: No magic
[   18.690611] vdc: Command: checkpoint restoreCheckpoint /dev/block/by-name/userdata Failed: Status(-8, EX_SERVICE_SPECIFIC): '22: No magic'
[   18.737631] vdc: Waited 0ms for vold
[   18.745174] EXT4-fs (mmcblk2p15): Ignoring removed nomblk_io_submit option
[   18.745224] EXT4-fs (mmcblk2p15): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0
[   18.834458] type=1400 audit(1501837219.856:11): avc: denied { read } for comm="android.hardwar" name="u:object_r:serialno_prop:s0" dev="tmpfs" ino=258 scontext=u:r:hal_keymint_default:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=1
[   18.834696] type=1400 audit(1501837219.856:12): avc: denied { open } for comm="android.hardwar" path="/dev/__properties__/u:object_r:serialno_prop:s0" dev="tmpfs" ino=258 scontext=u:r:hal_keymint_default:s0 tcontext=u:object_r:serialno_prop:s0 tclass=file permissive=1
[   19.563186] EXT4-fs (mmcblk2p15): recovery complete
[   19.563444] EXT4-fs (mmcblk2p15): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit[   19.637485] e2fsck: e2fsck 1.46.2 (28-Feb-2021)
[   19.693871] e2fsck: Pass 1: Checking inodes, blocks, and sizes
[   19.806353] e2fsck: Pass 2: Checking directory structure
[   20.122271] EXT4-fs (mmcblk2p15): Using encoding defined by superblock: utf8-12.1.0 with flags 0x0
[   20.131406] EXT4-fs (mmcblk2p15): mounted filesystem with ordered data mode. Opts: discard,noauto_da_alloc,data=ordered,user_xattr,barrier=1,resgid=1065
[   20.290713] vdc: Waited 0ms for vold
[   20.344474] fscrypt: AES-256-CTS-CBC using implementation "cts-cbc-aes-ce"
[   20.347456] fscrypt: AES-256-XTS using implementation "xts-aes-ce"
[   20.438067] vold: keystore2 Keystore earlyBootEnded returned service specific error: -68
[   20.572994] rockchip-vop2 fe040000.vop: [drm:vop2_crtc_atomic_enable] Update mode to 1920x1080p60, type: 11(if:800, flag:0x0) for vp0 dclk: 148500000
[   20.573047] apexd: This device does not support updatable APEX. Exiting
[   20.573139] apexd: Marking APEXd as activated
[   20.847791] vdc: Waited 0ms for vold
[   21.123888] apexd: This device does not support updatable APEX. Exiting
[   21.123974] apexd: Marking APEXd as ready
[   21.248503] init: Service 'exec 12 (/system/bin/clean_scratch_files)' (pid 287) exited with status 0 oneshot service took 0.054000 seconds in background
[   21.248622] init: Sending signal 9 to service 'exec 12 (/system/bin/clean_scratch_files)' (pid 287) process group...
[   21.248928] libprocessgroup: Successfully killed process cgroup uid 0 pid 287 in 0ms
[   21.252052] init: Service 'exec 13 (/system/bin/recovery-persist)' (pid 289) exited with status 0 oneshot service took 0.031000 seconds in background
[   21.252124] init: Sending signal 9 to service 'exec 13 (/system/bin/recovery-persist)' (pid 289) process group...
[   21.252364] libprocessgroup: Successfully killed process cgroup uid 1000 pid 289 in 0ms
[   21.273287] LibBpfLoader: Loading critical for tethering ELF object /apex/com.android.tethering/etc/bpf/offload.o with license Apache 2.0
[   21.273434] LibBpfLoader: Section bpfloader_min_ver value is 2 [0x2]
[   21.273577] LibBpfLoader: Section bpfloader_max_ver value is 65536 [0x10000]
[   21.273705] LibBpfLoader: Section size_of_bpf_map_def value is 116 [0x74]
[   21.273828] LibBpfLoader: Section size_of_bpf_prog_def value is 92 [0x5c]
[   21.273858] LibBpfLoader: BpfLoader version 0x00013 processing ELF object /apex/com.android.tethering/etc/bpf/offload.o with ver [0x00002,0x10000)
[   21.275495] init: Service 'dump_kernel_panic' (pid 288) exited with status 0 oneshot service took 0.074000 seconds in background
[   21.275584] init: Sending signal 9 to service 'dump_kernel_panic' (pid 288) process group...
[   21.275875] libprocessgroup: Successfully killed process cgroup uid 0 pid 288 in 0ms
[   21.280937] LibBpfLoader: Loaded code section 3 (schedcls_tether_downstream6_ether)
[   21.281715] LibBpfLoader: Loaded relo section 3 (.relschedcls/tether_downstream6_ether)
[   21.281755] LibBpfLoader: Adding section 3 to cs list
[   21.281957] LibBpfLoader: Loaded code section 5 (schedcls_tether_upstream6_ether)
[   21.660308] printk: bpfloader: 1683 output lines suppressed due to ratelimiting
[   21.660794] init: Service 'bpfloader' (pid 290) exited with status 0 waiting took 0.424000 seconds
[   21.715815] init: Verified that /data/nfc has the encryption policy 96fe96351d96576d3a44b0eb74fb656d v2 modes 1/4 flags 0x2
[   21.716339] init: Inferred action different from explicit one, expected 0 but got 2
[   21.716862] init: Verified that /data/nfc/param has the encryption policy 96fe96351d96576d3a44b0eb74fb656d v2 modes 1/4 flags 0x2
[   21.743762] file system registered
[   21.747082] using random self ethernet address
[   21.747113] using random host ethernet address
[   21.818803] using random self ethernet address
[   21.818863] using random host ethernet address
[   22.380776] healthd: BatteryPresentPath not found
[   22.380865] healthd: BatteryTechnologyPath not found
[   22.380885] healthd: BatteryCycleCountPath not found
[   22.415553] healthd: battery l=100 v=7904 t=18.8 h=2 st=5 c=-7000 fc=5000000 chg=
[   22.883310] bcmdhd: loading out-of-tree module taints kernel.
[   22.918994] [dhd] _dhd_module_init: in Dongle Host Driver, version 101.10.591.33.20 (20230621-1)(gdbe2bd9)\x0a/home/rootroot/Android13.0/external/wifi_driver/bcmdhd compiled on Jun  2 2025 at 17:52:12\x0a
[   22.919043] [dhd] ANDROID_VERSION = 13
[   22.919054] [dhd] STATIC-MSG) dhd_static_buf_init : 101.10.361.31 (wlan=r892223-20230427-1)
[   22.919176] [dhd] STATIC-MSG) dhd_init_wlan_mem : prealloc ok for index 0: 6624256(6469K)
[   22.919193] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[   22.919283] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=115, oob_irq_flags=0x4
[   22.919294] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
[   22.919303] [dhd] dhd_wifi_platform_load: Enter
[   22.919344] [dhd] Power-up adapter 'DHD generic adapter'
[   22.919568] [dhd] dummy_probe: enter
[   22.920253] [dhd] dummy_probe: enter
[   22.921023] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[   22.921053] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[   22.921062] [WLAN_RFKILL]: rockchip_wifi_power: 1
[   22.921073] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[   22.921082] [WLAN_RFKILL]: wifi turn on power [GPIO-1-0]
[   23.097288] type=1400 audit(1501837224.120:55): avc: denied { read } for comm="ExtCamHotPlug" name="u:object_r:default_prop:s0" dev="tmpfs" ino=134 scontext=u:r:hal_camera_default:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1
[   23.097506] type=1400 audit(1501837224.120:56): avc: denied { open } for comm="ExtCamHotPlug" path="/dev/__properties__/u:object_r:default_prop:s0" dev="tmpfs" ino=134 scontext=u:r:hal_camera_default:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1
[   23.097627] type=1400 audit(1501837224.120:57): avc: denied { getattr } for comm="ExtCamHotPlug" path="/dev/__properties__/u:object_r:default_prop:s0" dev="tmpfs" ino=134 scontext=u:r:hal_camera_default:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1
[   23.097738] type=1400 audit(1501837224.120:58): avc: denied { map } for comm="ExtCamHotPlug" path="/dev/__properties__/u:object_r:default_prop:s0" dev="tmpfs" ino=134 scontext=u:r:hal_camera_default:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1
[   23.124943] [dhd] wifi_platform_set_power = 1, sleep done: 200 msec
[   23.124983] [dhd] wifi_platform_bus_enumerate device present 1
[   23.124994] [dhd] ======== Card detection to detect SDIO card! ========
[   23.141857] rkisp-vir0: rkisp_enum_frameintervals Not active sensor
[   23.142122] rkisp-vir0: rkisp_enum_frameintervals Not active sensor
[   23.142604] rkisp-vir0: rkisp_enum_frameintervals Not active sensor
[   23.142849] rkisp-vir0: rkisp_enum_frameintervals Not active sensor
[   23.148673] [dhd] bcmsdh_register: register client driver
[   23.148938] [dhd] bcmsdh_sdmmc_probe: Enter num=1
[   23.149250] [dhd] bcmsdh_sdmmc_probe: Enter num=2
[   23.149271] [dhd] bus num (host idx)=3, slot num (rca)=1
[   23.149282] [dhd] found adapter info 'DHD generic adapter'
[   23.149295] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 3, size 139264
[   23.149336] [dhd] succeed to alloc static buf
[   23.149344] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 4, size 0
[   23.149399] [dhd] sdioh_attach: set sd_f2_blocksize 256
[   23.149431] [dhd] sdioh_attach: sd clock rate = 150000000
[   23.149877] [dhd] dhdsdio_probe : no mutex held
[   23.149896] [dhd] dhdsdio_probe : set mutex lock
[   23.150002] [dhd] F1 signature read @0x18000000=0x15294345
[   23.152981] [dhd] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x9 pkg:0x2
[   23.154651] [dhd] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
[   23.154736] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 7, size 42712
[   23.154771] [dhd] dhd_conf_set_chiprev : devid=0xa9bf, chip=0x4345, chiprev=9
[   23.154903] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 0, size 10320
[   23.156682] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 5, size 65536
[   23.171665] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 19, size 65720
[   23.171746] [dhd] dhd_log_dump_init: kernel log buf size = 512KB; logdump_prsrv_tailsize = 80KB; limit prsrv tail size to = 76KB
[   23.171762] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 15, size 4194304
[   23.172835] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 16, size 8192
[   23.173161] [dhd] dhd_attach(): thread:dhd_watchdog_thread:190 started
[   23.191666] [dhd] dhd_attach(): thread:dhd_dpc:191 started
[   23.192402] [dhd] dhd_attach(): thread:dhd_rxf:192 started
[   23.192448] [dhd] dhd_deferred_work_init: work queue initialized
[   23.192468] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
[   23.192478] [dhd] dhd_tcpack_suppress_set: TCPACK_INFO_MAXNUM=40, TCPDATA_INFO_MAXNUM=40
[   23.192578] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[   23.192606] [dhd] sdioh_cis_read: func_cis_ptr[0]=0x10ac
[   23.200262] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 1, size 10300
[   23.200297] [dhd] STATIC-MSG) dhd_wlan_mem_prealloc : section 2, size 65536
[   23.200372] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[   23.200502] [dhd] Dongle Host Driver, version 101.10.591.33.20 (20230621-1)(gdbe2bd9)\x0a/home/rootroot/Android13.0/external/wifi_driver/bcmdhd compiled on Jun  2 2025 at 17:52:12\x0a
[   23.209035] [dhd] Register interface [wlan0]  MAC: 54:78:c9:3e:89:96\x0a
[   23.209262] [dhd] [wlan0] wl_android_wifi_off :  g_wifi_on=1 force_off=1
[   23.209303] [dhd] dhd_bus_devreset: == Power OFF ==
[   23.209508] [dhd] dhd_bus_stop: making DHD_BUS_DOWN
[   23.209556] [dhd] bcmsdh_oob_intr_unregister: Enter
[   23.209569] [dhd] bcmsdh_oob_intr_unregister: irq is not registered
[   23.209589] [dhd] dhd_bus_devreset: making dhdpub up FALSE
[   23.209601] [dhd] dhd_txglom_enable: enable 0
[   23.209611] [dhd] dhd_bus_devreset: making DHD_BUS_DOWN
[   23.209661] [dhd] wifi_platform_set_power = 0, delay: 0 msec
[   23.209677] [dhd] ======== PULL WL_REG_ON(-1) LOW! ========
[   23.210330] [dhd] [wlan0] wl_android_wifi_off : out
[   23.217658] [dhd] Register interface [wlan1]  MAC: 56:78:c9:3e:89:96\x0a
[   23.217698] [dhd] wl_android_post_init: 0
[   23.217714] [dhd] dhdsdio_probe : mutex is released.
[   23.222032] [dhd] _dhd_module_init: Exit err=0
[   23.360997] type=1400 audit(1501837224.380:59): avc: denied { read } for comm="surfaceflinger" name="u:object_r:vendor_hwc_prop:s0" dev="tmpfs" ino=307 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:vendor_hwc_prop:s0 tclass=file permissive=1
[   23.361287] type=1400 audit(1501837224.380:60): avc: denied { open } for comm="surfaceflinger" path="/dev/__properties__/u:object_r:vendor_hwc_prop:s0" dev="tmpfs" ino=307 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:vendor_hwc_prop:s0 tclass=file permissive=1
[   23.361465] type=1400 audit(1501837224.380:61): avc: denied { getattr } for comm="surfaceflinger" path="/dev/__properties__/u:object_r:vendor_hwc_prop:s0" dev="tmpfs" ino=307 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:vendor_hwc_prop:s0 tclass=file permissive=1
[   23.361690] type=1400 audit(1501837224.380:62): avc: denied { map } for comm="surfaceflinger" path="/dev/__properties__/u:object_r:vendor_hwc_prop:s0" dev="tmpfs" ino=307 scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:vendor_hwc_prop:s0 tclass=file permissive=1
[   23.384679] type=1400 audit(1501837224.403:63): avc: denied { read } for comm="rockchip.hardwa" name="u:object_r:default_prop:s0" dev="tmpfs" ino=134 scontext=u:r:hal_tv_input_default:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1
[   23.392437] type=1400 audit(1501837224.410:64): avc: denied { open } for comm="rockchip.hardwa" path="/dev/__properties__/u:object_r:default_prop:s0" dev="tmpfs" ino=134 scontext=u:r:hal_tv_input_default:s0 tcontext=u:object_r:default_prop:s0 tclass=file permissive=1
[   23.563335] read descriptors
[   23.563382] read strings
[   24.722440] read descriptors
[   24.722512] read strings
[   25.017858] dwc3 fcc00000.dwc3: device reset
[   25.087123] android_work: sent uevent USB_STATE=CONNECTED
[   25.087312] android_work: sent uevent USB_STATE=CONFIGURED
[   26.862697] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   27.866384] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   28.867659] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   29.161090] type=1400 audit(1501837230.183:127): avc: denied { read } for comm="main" name="libcutils.so" dev="dm-3" ino=1747 scontext=u:r:zygote:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
[   29.161658] type=1400 audit(1501837230.183:128): avc: denied { open } for comm="main" path="/vendor/lib64/libcutils.so" dev="dm-3" ino=1747 scontext=u:r:zygote:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
[   29.162043] type=1400 audit(1501837230.183:129): avc: denied { getattr } for comm="main" path="/vendor/lib64/libcutils.so" dev="dm-3" ino=1747 scontext=u:r:zygote:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
[   29.162369] type=1400 audit(1501837230.183:130): avc: denied { map } for comm="main" path="/vendor/lib64/libcutils.so" dev="dm-3" ino=1747 scontext=u:r:zygote:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
[   29.166364] type=1400 audit(1501837230.190:131): avc: denied { execute } for comm="main" path="/vendor/lib64/libcutils.so" dev="dm-3" ino=1747 scontext=u:r:zygote:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
[   29.869100] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   30.869800] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   31.871124] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   32.573394] type=1400 audit(1501837233.596:132): avc: denied { execute } for comm="sh" name="toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   32.573663] type=1400 audit(1501837233.596:133): avc: denied { getattr } for comm="sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   32.575179] type=1400 audit(1501837233.596:134): avc: denied { read open } for comm="sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   32.575674] type=1400 audit(1501837233.596:135): avc: denied { execute_no_trans } for comm="sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   32.576839] type=1400 audit(1501837233.600:136): avc: denied { map } for comm="sync" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   32.872319] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   33.873366] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   34.874206] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   35.660440] healthd: battery l=100 v=7968 t=18.8 h=2 st=3 c=-7000 fc=5000000 chg=
[   35.876693] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   36.868527] Freeing drm_logo memory: 736K
[   36.876233] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   37.712298] dwc3 fcc00000.dwc3: device disconnect
[   37.713076] android_work: sent uevent USB_STATE=DISCONNECTED
[   37.853967] android_work: did not send uevent (0 0 0000000000000000)
[   37.854540] read descriptors
[   37.854578] read strings
[   37.855713] init: processing action (sys.usb.config=adb && sys.usb.configfs=1 && sys.usb.ffs.ready=1) from (/system/etc/init/hw/init.usb.configfs.rc:21)
[   37.857428] init: Command 'symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f1' action=sys.usb.config=adb && sys.usb.configfs=1 && sys.usb.ffs.ready=1 (/system/etc/init/hw/init.usb.configfs.rc:23) took 0ms and failed: symlink() failed: File exists
[   37.879217] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   38.460347] android_work: did not send uevent (0 0 0000000000000000)
[   38.876648] type=1400 audit(1501837239.900:147): avc: denied { execute } for comm="sh" name="toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   38.876951] type=1400 audit(1501837239.900:148): avc: denied { getattr } for comm="sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   38.878734] type=1400 audit(1501837239.900:149): avc: denied { read open } for comm="sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   38.879814] type=1400 audit(1501837239.903:150): avc: denied { execute_no_trans } for comm="sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   38.880007] init: Control message: Could not find 'aidl/package_native' for ctl.interface_start from pid: 170 (/system/bin/servicemanager)
[   38.882107] type=1400 audit(1501837239.903:151): avc: denied { map } for comm="sync" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   39.065732] init: service 'idmap2d' requested start, but it is already running (flags: 4)
[   39.065817] init: Control message: Processed ctl.start for 'idmap2d' from pid: 556 (system_server)
[   39.259612] healthd: battery l=100 v=7968 t=18.8 h=2 st=3 c=-7000 fc=5000000 chg=
[   39.305969] dwc3 fcc00000.dwc3: device reset
[   39.312520] healthd: battery l=100 v=7968 t=18.8 h=2 st=3 c=-7000 fc=5000000 chg=
[   39.368752] android_work: sent uevent USB_STATE=CONNECTED
[   39.376447] android_work: sent uevent USB_STATE=CONFIGURED
[   39.773609] type=1400 audit(1748858172.180:152): avc: denied { read } for comm="android.ui" name="uevent" dev="sysfs" ino=9557 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   39.773893] type=1400 audit(1748858172.180:153): avc: denied { open } for comm="android.ui" path="/sys/devices/platform/fe0a0000.hdmi/uevent" dev="sysfs" ino=9557 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   39.774047] type=1400 audit(1748858172.180:154): avc: denied { getattr } for comm="android.ui" path="/sys/devices/platform/fe0a0000.hdmi/uevent" dev="sysfs" ino=9557 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   39.947956] init: processing action (sys.sysctl.extra_free_kbytes=*) from (/system/etc/init/hw/init.rc:1203)
[   39.949080] init: starting service 'exec 18 (/system/bin/extra_free_kbytes.sh 27000)'...
[   39.960108] init: SVC_EXEC service 'exec 18 (/system/bin/extra_free_kbytes.sh 27000)' pid 677 (uid 0 gid 0+0 context default) started; waiting...
[   40.986235] type=1400 audit(1748858173.390:155): avc: denied { execute } for comm="sh" name="toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   40.986717] type=1400 audit(1748858173.390:156): avc: denied { getattr } for comm="sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   41.248440] read descriptors
[   41.249289] read strings
[   41.249508] read descriptors
[   41.249539] read strings
[   41.911476] healthd: battery l=100 v=7896 t=18.8 h=2 st=3 c=-7000 fc=5000000 chg=
[   42.037109] rk_gmac-dwmac fe010000.ethernet eth0: no phy at addr -1
[   42.037261] rk_gmac-dwmac fe010000.ethernet eth0: stmmac_open: Cannot attach to PHY (error: -19)
[   45.282109] type=1400 audit(1748858177.680:178): avc: denied { execute } for comm="sh" name="toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   45.282418] type=1400 audit(1748858177.680:179): avc: denied { getattr } for comm="sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   45.283497] type=1400 audit(1748858177.683:180): avc: denied { read open } for comm="sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   45.283887] type=1400 audit(1748858177.683:181): avc: denied { execute_no_trans } for comm="sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   45.284048] type=1400 audit(1748858177.683:182): avc: denied { map } for comm="sync" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:autosync:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   46.094895] vcc3v3_lcd1_n: disabling
[   46.619161] type=1400 audit(1748858179.026:183): avc: denied { search } for comm="system_server" name="tethering" dev="bpf" ino=21598 scontext=u:r:system_server:s0 tcontext=u:object_r:fs_bpf_tethering:s0 tclass=dir permissive=1
[   46.646152] type=1400 audit(1748858179.053:184): avc: denied { read } for comm="system_server" name="uevent" dev="sysfs" ino=9557 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   46.647239] type=1400 audit(1748858179.053:185): avc: denied { open } for comm="system_server" path="/sys/devices/platform/fe0a0000.hdmi/uevent" dev="sysfs" ino=9557 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   46.647774] type=1400 audit(1748858179.053:186): avc: denied { getattr } for comm="system_server" path="/sys/devices/platform/fe0a0000.hdmi/uevent" dev="sysfs" ino=9557 scontext=u:r:system_server:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   46.682875] type=1400 audit(1748858179.086:187): avc: denied { open } for comm="RenderThread" path="/dev/__properties__/u:object_r:vendor_default_prop:s0" dev="tmpfs" ino=305 scontext=u:r:system_app:s0 tcontext=u:object_r:vendor_default_prop:s0 tclass=file permissive=1
[   46.745140] dwc3 fcc00000.dwc3: device disconnect
[   46.746156] android_work: sent uevent USB_STATE=DISCONNECTED
[   46.884280] android_work: did not send uevent (0 0 0000000000000000)
[   46.885196] read descriptors
[   46.885242] read strings
[   46.886766] init: processing action (sys.usb.config=adb && sys.usb.configfs=1 && sys.usb.ffs.ready=1) from (/system/etc/init/hw/init.usb.configfs.rc:21)
[   46.893716] init: Command 'symlink /config/usb_gadget/g1/functions/ffs.adb /config/usb_gadget/g1/configs/b.1/f1' action=sys.usb.config=adb && sys.usb.configfs=1 && sys.usb.ffs.ready=1 (/system/etc/init/hw/init.usb.configfs.rc:23) took 4ms and failed: symlink() failed: File exists
[   47.367190] android_work: did not send uevent (0 0 0000000000000000)
[   48.136749] dwc3 fcc00000.dwc3: device reset
[   48.202487] android_work: sent uevent USB_STATE=CONNECTED
[   48.209975] android_work: sent uevent USB_STATE=CONFIGURED
[   49.118998] init: Sending signal 9 to service 'idmap2d' (pid 435) process group...
[   49.125005] libprocessgroup: Successfully killed process cgroup uid 1000 pid 435 in 5ms
[   49.131627] init: Control message: Processed ctl.stop for 'idmap2d' from pid: 556 (system_server)
[   49.132199] init: Service 'idmap2d' (pid 435) received signal 9
[   50.933937] binder: undelivered transaction 29767, process died.
[   50.935237] init: Service 'bootanim' (pid 214) exited with status 0 oneshot service took 32.299000 seconds in background
[   50.935311] init: Sending signal 9 to service 'bootanim' (pid 214) process group...
[   50.935614] libprocessgroup: Successfully killed process cgroup uid 1003 pid 214 in 0ms
[   51.139598] init: processing action (sys.boot_completed=1) from (/system/etc/init/hw/init.rc:1194)
[   51.272196] type=1400 audit(1748858183.676:202): avc: denied { map } for comm="getagpsdata.sh" path="/system/bin/sh" dev="dm-0" ino=1669 scontext=u:r:getagpsdata:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[   51.275509] type=1400 audit(1748858183.680:203): avc: denied { read } for comm="getagpsdata.sh" path="/system/bin/sh" dev="dm-0" ino=1669 scontext=u:r:getagpsdata:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[   51.275717] type=1400 audit(1748858183.680:204): avc: denied { execute } for comm="getagpsdata.sh" path="/system/bin/sh" dev="dm-0" ino=1669 scontext=u:r:getagpsdata:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[   51.285760] type=1400 audit(1748858183.683:205): avc: denied { getattr } for comm="getagpsdata.sh" path="/system/bin/sh" dev="dm-0" ino=1669 scontext=u:r:getagpsdata:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[   51.351053] type=1400 audit(1748858183.756:206): avc: denied { getattr } for comm="getagpsdata.sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:getagpsdata:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   51.351289] type=1400 audit(1748858183.756:207): avc: denied { execute } for comm="getagpsdata.sh" name="toybox" dev="dm-0" ino=1721 scontext=u:r:getagpsdata:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   51.399176] type=1400 audit(1748858183.793:208): avc: denied { read open } for comm="getagpsdata.sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:getagpsdata:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   51.399608] type=1400 audit(1748858183.793:209): avc: denied { execute_no_trans } for comm="getagpsdata.sh" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:getagpsdata:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   51.399789] type=1400 audit(1748858183.796:210): avc: denied { map } for comm="touch" path="/system/bin/toybox" dev="dm-0" ino=1721 scontext=u:r:getagpsdata:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[   51.454725] type=1400 audit(1748858183.860:211): avc: denied { dac_read_search } for comm="touch" capability=2 scontext=u:r:getagpsdata:s0 tcontext=u:r:getagpsdata:s0 tclass=capability permissive=1
[   51.499664] audit: audit_lost=1 audit_rate_limit=5 audit_backlog_limit=64
[   51.499721] audit: rate limit exceeded
[   51.922276] init: starting service 'simple_bugreportd'...
[   51.929304] init: Created socket '/dev/socket/dumpstate', mode 660, user 2000, group 1007
[   51.956952] init: Control message: Processed ctl.start for 'simple_bugreportd' from pid: 556 (system_server)
[   52.086989] init: processing action (sys.boot_completed=1) from (/vendor/etc/init/init.tune_io.rc:12)
[   52.136909] init: processing action (persist.sys.zram_enabled=1 && sys-boot-completed-set) from (/vendor/etc/init/hw/init.rk30board.rc:245)
[   52.164603] zram0: detected capacity change from 0 to 2044383232
[   52.273718] mkswap: Swapspace size: 1996464k, UUID=014a832d-59fd-4267-8266-07c466e969e4
[   52.301749] Adding 1996464k swap on /dev/block/zram0.  Priority:-2 extents:1 across:1996464k SS
[   52.302421] init: Command 'swapon_all /vendor/etc/fstab.${ro.hardware}' action=persist.sys.zram_enabled=1 && sys-boot-completed-set (/vendor/etc/init/hw/init.rk30board.rc:246) took 165ms and succeeded
[   52.303599] init: processing action (sys.user.0.ce_available=true) from (/system/etc/init/wifi.rc:21)
[   52.308292] selinux: SELinux: Skipping restorecon on directory(/data/misc_ce/0/apexdata/com.android.wifi)
[   52.308353] selinux:
[   52.309426] init: processing action (sys.boot_completed=1 && sys.wifitracing.started=1 && wifi.interface=*) from (/system/etc/init/wifi.rc:98)
[   53.018017] audit: audit_lost=35 audit_rate_limit=5 audit_backlog_limit=64
[   53.018094] audit: rate limit exceeded
rk3566_t:/ #
rk3566_t:/ #
rk3566_t:/ #
rk3566_t:/ #
rk3566_t:/ # dmesg | grep -i power
[   14.194878] thermal_sys: Registered thermal governor 'power_allocator'
[   14.202665] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[   14.436978] rockchip-pinctrl pinctrl: unable to find group for node gpiopower-pwr
[   14.446568] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[   14.446577] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[   14.446651] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
[   14.579343] pwm-backlight backlight: supply power not found, using dummy regulator
[   15.024193] rk817-battery rk817-battery: low_power_sleep missing!
[   15.097395] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[   15.120246] test_power_init: test power disabled
[   15.139689] rp_power prepare build 8 gpio
[   15.139734] rp_power request pwr_5v_3v3
[   15.139779] rp_power request led
[   15.139813] rp_power request usb_pwr
[   15.139847] rp_power request usb_rst
[   15.139987] rp_power request spk_en
[   15.140024] rp_power request spk_mute
[   15.140065] rp_power request usb_mode
[   15.140099] rp_power request Equipment_EN
[   15.140259] input: gpio_event as /devices/platform/rp_power/input/input1
[   15.140620] input: gpio_event as /devices/platform/rp_power/input/input2
[   15.360394] mpp_rkvenc fdf40000.rkvenc: failed to find power_model node
[   15.360408] mpp_rkvenc fdf40000.rkvenc: failed to initialize power model
[   15.363151] mpp_rkvdec2 fdf80200.rkvdec: failed to find power_model node
[   15.363164] mpp_rkvdec2 fdf80200.rkvdec: failed to initialize power model
[   15.366552] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 143; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[   15.479615] RKNPU fde40000.npu: failed to find power_model node
[   15.479628] RKNPU fde40000.npu: RKNPU: failed to initialize power model
[   22.919344] [dhd] Power-up adapter 'DHD generic adapter'
[   22.921023] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[   22.921062] [WLAN_RFKILL]: rockchip_wifi_power: 1
[   22.921073] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
[   22.921082] [WLAN_RFKILL]: wifi turn on power [GPIO-1-0]
[   23.124943] [dhd] wifi_platform_set_power = 1, sleep done: 200 msec
[   23.209303] [dhd] dhd_bus_devreset: == Power OFF ==
[   23.209661] [dhd] wifi_platform_set_power = 0, delay: 0 msec
rk3566_t:/ #
rk3566_t:/ #
rk3566_t:/ #
rk3566_t:/ #
rk3566_t:/ #
rk3566_t:/ #
rk3566_t:/ # cd /sys/class/thermal/
rk3566_t:/sys/class/thermal #
rk3566_t:/sys/class/thermal # ls -l
total 0
lrwxrwxrwx 1 root root 0 2025-06-02 18:01 cooling_device0 -> ../../devices/virtual/thermal/cooling_device0
lrwxrwxrwx 1 root root 0 2017-08-04 17:00 thermal_zone0 -> ../../devices/virtual/thermal/thermal_zone0
lrwxrwxrwx 1 root root 0 2017-08-04 17:00 thermal_zone1 -> ../../devices/virtual/thermal/thermal_zone1
lrwxrwxrwx 1 root root 0 2017-08-04 17:00 thermal_zone2 -> ../../devices/virtual/thermal/thermal_zone2
rk3566_t:/sys/class/thermal #
rk3566_t:/sys/class/thermal #
rk3566_t:/sys/class/thermal # cd the
thermal_zone0/  thermal_zone1/  thermal_zone2/
rk3566_t:/sys/class/thermal # cd thermal_zone0/
rk3566_t:/sys/class/thermal/thermal_zone0 #
rk3566_t:/sys/class/thermal/thermal_zone0 # ls -l
total 0
-r--r--r-- 1 root   root   4096 2025-06-02 18:02 available_policies
lrwxrwxrwx 1 root   root      0 2025-06-02 18:02 cdev0 -> ../cooling_device0
-r--r--r-- 1 root   root   4096 2025-06-02 18:02 cdev0_trip_point
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 cdev0_weight
drwxr-xr-x 3 root   root      0 2017-08-04 17:00 hwmon0
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 integral_cutoff
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 k_d
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 k_i
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 k_po
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 k_pu
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 mode
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 offset
-rw-r--r-- 1 system system 4096 2017-08-04 17:00 policy
drwxr-xr-x 2 root   root      0 2017-08-04 17:00 power
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 slope
lrwxrwxrwx 1 root   root      0 2025-06-02 18:02 subsystem -> ../../../../class/thermal
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 sustainable_power
-r--r--r-- 1 root   root   4096 2025-06-02 17:56 temp
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 trip_point_0_hyst
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 trip_point_0_temp
-r--r--r-- 1 root   root   4096 2025-06-02 18:02 trip_point_0_type
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 trip_point_1_hyst
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 trip_point_1_temp
-r--r--r-- 1 root   root   4096 2025-06-02 18:02 trip_point_1_type
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 trip_point_2_hyst
-rw-r--r-- 1 root   root   4096 2025-06-02 18:02 trip_point_2_temp
-r--r--r-- 1 root   root   4096 2025-06-02 18:02 trip_point_2_type
-r--r--r-- 1 root   root   4096 2025-06-02 17:56 type
-rw-r--r-- 1 root   root   4096 2017-08-04 17:00 uevent
rk3566_t:/sys/class/thermal/thermal_zone0 #
rk3566_t:/sys/class/thermal/thermal_zone0 # cat temp
51875
rk3566_t:/sys/class/thermal/thermal_zone0 #
C:\Users\QQ>
 

相关文章:

  • 使用Redis作为缓存优化ElasticSearch读写性能
  • LRC and VIP
  • Starrocks Full GC日志分析
  • QGIS 矢量数据属性表中文乱码解决方案:4 步修复编码匹配问题
  • 系统设计面试利器:The System Design Primer开源项目介绍
  • PostgreSQL数据库备份
  • 人工智能-Chain of Thought Prompting(思维链提示,简称CoT)
  • 转战海外 Web3 远程工作指南
  • GIC v3 v4 虚拟化架构
  • 《TCP/IP 详解 卷1:协议》第5章:Internet协议
  • 第11节 Node.js 模块系统
  • macos常见且应该避免被覆盖的系统环境变量(避免用 USERNAME 作为你的自定义变量名)
  • 完美解决在pycharm中创建Django项目安装mysqlclient报错的问题(windows下)
  • Java高级 | (二十二)快速应用开发框架——Spring Boot
  • ABAP设计模式之---“高内聚,低耦合(High Cohesion Low Coupling)”
  • 用PyTorch从零开始编写DeepSeek-V2
  • 结构性设计模式之Composite(组合)
  • 从Java的JDK源码中学设计模式之装饰器模式
  • Ubuntu 系统部署 MySQL 入门篇
  • 深入理解汇编语言中的顺序与分支结构
  • 二手书店网站建设项目规划书/seo的收费标准
  • 风铃网站具体是做那方面的/优化关键词排名哪家好
  • 网站建设和/优质网站
  • 网站公司成本/事件营销的案例有哪些
  • 导购网站 转化率/广告投放方式
  • 品牌网站建设9小蝌蚪9/百度置顶广告多少钱