当前位置： 首页 > news >正文

wordpress翻译公司网站吕梁网站制作

news 2025/11/14 6:12:51
wordpress翻译公司网站,吕梁网站制作,免费网站建设排名,dark ui wordpress多个序列尝试访问单个驱动器时，执行序列的序列器会通过称为仲裁（arbitration）的过程按特定顺序调度这些序列。可根据称为仲裁模式（arbitration modes）的特定标准，将序列器配置为优先允许某些序列访问驱动器…

多个序列尝试访问单个驱动器时，执行序列的序列器会通过称为仲裁（arbitration）的过程按特定顺序调度这些序列。可根据称为仲裁模式（arbitration modes）的特定标准，将序列器配置为优先允许某些序列访问驱动器。

Example

要理解不同的仲裁模式，我们首先需要构建一个包含序列发生器（sequencer）和驱动器（driver）环境的测试平台。需要注意的是，那些不需要访问驱动器或通过start_item和finish_item执行序列项的序列无需经过仲裁。因此，如果在同一个序列发生器上启动多个简单序列，它们将并行执行。

1. Data class

名为 base_class 的类代表一个数据对象，该对象将被发送至驱动器，以便驱动器能将其转换为被测设备接口上的协议级引脚翻转信号。为清晰演示仲裁机制，我们对此类定义进行了简化处理。

class base_pkt extends uvm_sequence_item;`uvm_object_utils(base_pkt)function new(string name = "base_pkt");super.new(name);endfunctionrand bit[7:0] addr;
endclass

2.driver

假设一个驱动程序接受一个类型为 base_pkt 的数据对象，并翻转 DUT 的引脚。

class base_driver extends uvm_driver #(base_pkt);`uvm_component_utils(base_driver)function new(string name = "base_driver", uvm_component parent=null);super.new(name, parent);endfunction// Assume that the packet is driven across to the DUT within 10ns// after which the driver calls item_done()virtual task run_phase(uvm_phase phase);base_pkt m_pkt;forever beginseq_item_port.get_next_item(m_pkt);#10 `uvm_info ("DRV", $sformatf("Drive packet with addr=0x%0h", m_pkt.addr), UVM_LOW)seq_item_port.item_done();endendtask
endclass

3. Environment

环境类实例化了一个序列发生器和一个驱动器，并在它们之间建立连接。

class base_env extends uvm_env;`uvm_component_utils(base_env)function new(string name="base_env", uvm_component parent=null);super.new(name, parent);endfunctionbase_driver  		 		m_drv;uvm_sequencer#(base_pkt)  m_seqr;virtual function void build_phase(uvm_phase phase);super.build_phase(phase);m_drv = base_driver::type_id::create("m_drv", this);m_seqr = uvm_sequencer#(base_pkt)::type_id::create("m_seqr", this);endfunctionvirtual function void connect_phase(uvm_phase phase);super.connect_phase(phase);m_drv.seq_item_port.connect(m_seqr.seq_item_export);endfunction
endclass

4. sequence 

名为base_seq的序列类会创建数据包，并由上述定义的序列器执行。该数据包将被发送至驱动器，并处于阻塞状态，直至驱动器调用item_done方法。

由于单个序列器上会启动该序列的多个实例，因此声明了名为seq_num的变量来区分不同序列。同时通过使数据包地址唯一化，以识别具体由哪个序列负责通过驱动器发送数据。

class base_seq extends uvm_sequence;`uvm_object_utils(base_seq)function new(string name="base_seq");super.new(name);endfunctionint seq_num;virtual task body();base_pkt m_pkt = base_pkt::type_id::create("m_pkt");`uvm_info(get_name(), $sformatf("Started body"), UVM_LOW)start_item(m_pkt);m_pkt.randomize() with { addr == seq_num; };finish_item(m_pkt);#10 `uvm_info(get_name(), $sformatf("Ended body"), UVM_LOW)endtask
endclass

5. test

下面定义了一个基础测试类，用于构建测试环境和所有序列。该类还包含一个额外功能，用于显示环境中序列器当前的仲裁方案。根据该仲裁方案，序列器会按照特定顺序向驱动程序授予所有序列的访问权限。

class base_test extends uvm_test;`uvm_component_utils(base_test)function new(string name="base_test", uvm_component parent=null);super.new(name, parent);endfunctionbase_seq 		m_seq[6];base_env 		m_env;virtual function void build_phase(uvm_phase phase);super.build_phase(phase);foreach(m_seq[i]) beginm_seq[i] = base_seq::type_id::create($sformatf("m_seq_%0d", i));m_seq[i].seq_num = i;endm_env = base_env::type_id::create("m_env", this);endfunctionvirtual function void show_arb_cfg();UVM_SEQ_ARB_TYPE  cur_arb;cur_arb = m_env.m_seqr.get_arbitration();`uvm_info("TEST", $sformatf("Seqr set to %s", cur_arb.name()), UVM_LOW)endfunction
endclass

UVM_SEQ_ARB_FIFO

这是默认的仲裁模式，UVM序列器会启动它们而不考虑其优先级。

Without priority

class arb_fifo_test extends base_test;`uvm_component_utils(arb_fifo_test)function new(string name, uvm_component parent);super.new(name, parent);endfunctionvirtual task run_phase(uvm_phase phase);super.run_phase(phase);phase.raise_objection(this);m_env.m_seqr.set_arbitration(UVM_SEQ_ARB_FIFO);show_arb_cfg();forkm_seq[0].start(m_env.m_seqr);m_seq[1].start(m_env.m_seqr);m_seq[2].start(m_env.m_seqr);m_seq[3].start(m_env.m_seqr);joinphase.drop_objection(this);endtask
endclass
UVM_INFO @ 0: reporter [RNTST] Running test arb_fifo_test...
UVM_INFO testbench.sv(90) @ 0: uvm_test_top [TEST] Seqr set to UVM_SEQ_ARB_FIFO
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Started body
UVM_INFO testbench.sv(41) @ 10: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x0
UVM_INFO testbench.sv(27) @ 20: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Ended body
UVM_INFO testbench.sv(41) @ 20: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x1
UVM_INFO testbench.sv(27) @ 30: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Ended body
UVM_INFO testbench.sv(41) @ 30: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x2
UVM_INFO testbench.sv(27) @ 40: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Ended body
UVM_INFO testbench.sv(41) @ 40: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x3
UVM_INFO testbench.sv(27) @ 50: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Ended body
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_objection.svh(1271) @ 50: reporter [TEST_DONE] 'run' phase is ready to proceed to the 'extract' phase
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_report_server.svh(847) @ 50: reporter [UVM/REPORT/SERVER] 
--- UVM Report Summary ---

With priority

Lets add some priorities to the sequence when they are started on the sequencer and see how they behave.

class arb_fifo_test extends base_test;`uvm_component_utils(arb_fifo_test)function new(string name, uvm_component parent);super.new(name, parent);endfunctionvirtual task run_phase(uvm_phase phase);super.run_phase(phase);phase.raise_objection(this);m_env.m_seqr.set_arbitration(UVM_SEQ_ARB_FIFO);show_arb_cfg();forkm_seq[0].start(m_env.m_seqr, .this_priority(100));m_seq[1].start(m_env.m_seqr, .this_priority(200));m_seq[2].start(m_env.m_seqr, .this_priority(300));m_seq[3].start(m_env.m_seqr, .this_priority(400));joinphase.drop_objection(this);endtask
endclass

UVM_INFO @ 0: reporter [RNTST] Running test arb_fifo_test...
UVM_INFO testbench.sv(90) @ 0: uvm_test_top [TEST] Seqr set to UVM_SEQ_ARB_FIFO
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Started body
UVM_INFO testbench.sv(41) @ 10: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x0
UVM_INFO testbench.sv(27) @ 20: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Ended body
UVM_INFO testbench.sv(41) @ 20: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x1
UVM_INFO testbench.sv(27) @ 30: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Ended body
UVM_INFO testbench.sv(41) @ 30: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x2
UVM_INFO testbench.sv(27) @ 40: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Ended body
UVM_INFO testbench.sv(41) @ 40: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x3
UVM_INFO testbench.sv(27) @ 50: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Ended body
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_objection.svh(1271) @ 50: reporter [TEST_DONE] 'run' phase is ready to proceed to the 'extract' phase
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_report_server.svh(847) @ 50: reporter [UVM/REPORT/SERVER] 
--- UVM Report Summary ---

 UVM_SEQ_ARB_RANDOM

在这里，sequencer 将随机启动序列，而不考虑它们的优先级。

Without priority

class arb_random_test extends base_test;`uvm_component_utils(arb_random_test)function new(string name, uvm_component parent);super.new(name, parent);endfunctionvirtual task run_phase(uvm_phase phase);super.run_phase(phase);phase.raise_objection(this);m_env.m_seqr.set_arbitration(UVM_SEQ_ARB_RANDOM);show_arb_cfg();forkm_seq[0].start(m_env.m_seqr);m_seq[1].start(m_env.m_seqr);m_seq[2].start(m_env.m_seqr);m_seq[3].start(m_env.m_seqr);joinphase.drop_objection(this);endtask
endclass
UVM_INFO @ 0: reporter [RNTST] Running test arb_random_test...
UVM_INFO testbench.sv(90) @ 0: uvm_test_top [TEST] Seqr set to UVM_SEQ_ARB_RANDOM
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Started body
UVM_INFO testbench.sv(41) @ 10: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x0
UVM_INFO testbench.sv(27) @ 20: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Ended body
UVM_INFO testbench.sv(41) @ 20: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x3
UVM_INFO testbench.sv(27) @ 30: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Ended body
UVM_INFO testbench.sv(41) @ 30: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x1
UVM_INFO testbench.sv(27) @ 40: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Ended body
UVM_INFO testbench.sv(41) @ 40: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x2
UVM_INFO testbench.sv(27) @ 50: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Ended body
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_objection.svh(1271) @ 50: reporter [TEST_DONE] 'run' phase is ready to proceed to the 'extract' phase
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_report_server.svh(847) @ 50: reporter [UVM/REPORT/SERVER] 
--- UVM Report Summary ---

With priority

Lets add some priorities to the sequence when they are started on the sequencer and see how they behave.

class arb_random_test extends base_test;`uvm_component_utils(arb_random_test)function new(string name, uvm_component parent);super.new(name, parent);endfunctionvirtual task run_phase(uvm_phase phase);super.run_phase(phase);phase.raise_objection(this);m_env.m_seqr.set_arbitration(UVM_SEQ_ARB_RANDOM);show_arb_cfg();forkm_seq[0].start(m_env.m_seqr, .this_priority(100));m_seq[1].start(m_env.m_seqr, .this_priority(200));m_seq[2].start(m_env.m_seqr, .this_priority(300));m_seq[3].start(m_env.m_seqr, .this_priority(400));joinphase.drop_objection(this);endtask
endclass
UVM_INFO @ 0: reporter [RNTST] Running test arb_random_test...
UVM_INFO testbench.sv(90) @ 0: uvm_test_top [TEST] Seqr set to UVM_SEQ_ARB_RANDOM
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Started body
UVM_INFO testbench.sv(41) @ 10: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x0
UVM_INFO testbench.sv(27) @ 20: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Ended body
UVM_INFO testbench.sv(41) @ 20: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x3
UVM_INFO testbench.sv(27) @ 30: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Ended body
UVM_INFO testbench.sv(41) @ 30: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x1
UVM_INFO testbench.sv(27) @ 40: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Ended body
UVM_INFO testbench.sv(41) @ 40: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x2
UVM_INFO testbench.sv(27) @ 50: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Ended body
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_objection.svh(1271) @ 50: reporter [TEST_DONE] 'run' phase is ready to proceed to the 'extract' phase
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_report_server.svh(847) @ 50: reporter [UVM/REPORT/SERVER] 
--- UVM Report Summary ---

 UVM_SEQ_ARB_STRICT_FIFO

该模式始终优先处理优先级最高的序列。多个具有相同优先级的序列将采用类似先进先出（FIFO）的仲裁机制。本次测试中，我们将增加序列数量，以便在同一优先级上存在多个序列。

Without priority

class arb_strict_fifo_test extends base_test;`uvm_component_utils(arb_strict_fifo_test)function new(string name, uvm_component parent);super.new(name, parent);endfunctionvirtual task run_phase(uvm_phase phase);super.run_phase(phase);phase.raise_objection(this);m_env.m_seqr.set_arbitration(UVM_SEQ_ARB_STRICT_FIFO);show_arb_cfg();forkm_seq[0].start(m_env.m_seqr);m_seq[3].start(m_env.m_seqr);m_seq[1].start(m_env.m_seqr);m_seq[2].start(m_env.m_seqr);m_seq[4].start(m_env.m_seqr);m_seq[5].start(m_env.m_seqr);joinphase.drop_objection(this);endtask
endclass

当未指定优先级时，确保输出与UVM_SEQ_ARB_FIFO仲裁模式相同。

UVM_INFO @ 0: reporter [RNTST] Running test arb_strict_fifo_test...
UVM_INFO testbench.sv(90) @ 0: uvm_test_top [TEST] Seqr set to UVM_SEQ_ARB_STRICT_FIFO
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_4 [m_seq_4] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_5 [m_seq_5] Started body
UVM_INFO testbench.sv(41) @ 10: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x0
UVM_INFO testbench.sv(27) @ 20: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Ended body
UVM_INFO testbench.sv(41) @ 20: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x3
UVM_INFO testbench.sv(27) @ 30: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Ended body
UVM_INFO testbench.sv(41) @ 30: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x1
UVM_INFO testbench.sv(27) @ 40: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Ended body
UVM_INFO testbench.sv(41) @ 40: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x2
UVM_INFO testbench.sv(27) @ 50: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Ended body
UVM_INFO testbench.sv(41) @ 50: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x4
UVM_INFO testbench.sv(27) @ 60: uvm_test_top.m_env.m_seqr@@m_seq_4 [m_seq_4] Ended body
UVM_INFO testbench.sv(41) @ 60: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x5
UVM_INFO testbench.sv(27) @ 70: uvm_test_top.m_env.m_seqr@@m_seq_5 [m_seq_5] Ended body
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_objection.svh(1271) @ 70: reporter [TEST_DONE] 'run' phase is ready to proceed to the 'extract' phase
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_report_server.svh(847) @ 70: reporter [UVM/REPORT/SERVER] 
--- UVM Report Summary ---

With priority

class arb_strict_fifo_test extends base_test;`uvm_component_utils(arb_strict_fifo_test)function new(string name, uvm_component parent);super.new(name, parent);endfunctionvirtual task run_phase(uvm_phase phase);super.run_phase(phase);phase.raise_objection(this);m_env.m_seqr.set_arbitration(UVM_SEQ_ARB_STRICT_FIFO);show_arb_cfg();forkm_seq[0].start(m_env.m_seqr, .this_priority(100));m_seq[1].start(m_env.m_seqr, .this_priority(200));m_seq[2].start(m_env.m_seqr, .this_priority(200));m_seq[3].start(m_env.m_seqr, .this_priority(200));m_seq[4].start(m_env.m_seqr, .this_priority(200));m_seq[5].start(m_env.m_seqr, .this_priority(400));joinphase.drop_objection(this);endtask
endclass

Note that priorities affect output in UVM_SEQ_ARB_STRICT_FIFO mode.

UVM_INFO @ 0: reporter [RNTST] Running test arb_strict_fifo_test...
UVM_INFO testbench.sv(90) @ 0: uvm_test_top [TEST] Seqr set to UVM_SEQ_ARB_STRICT_FIFO
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_4 [m_seq_4] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_5 [m_seq_5] Started body
UVM_INFO testbench.sv(41) @ 10: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x5
UVM_INFO testbench.sv(27) @ 20: uvm_test_top.m_env.m_seqr@@m_seq_5 [m_seq_5] Ended body
UVM_INFO testbench.sv(41) @ 20: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x1
UVM_INFO testbench.sv(27) @ 30: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Ended body
UVM_INFO testbench.sv(41) @ 30: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x2
UVM_INFO testbench.sv(27) @ 40: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Ended body
UVM_INFO testbench.sv(41) @ 40: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x3
UVM_INFO testbench.sv(27) @ 50: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Ended body
UVM_INFO testbench.sv(41) @ 50: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x4
UVM_INFO testbench.sv(27) @ 60: uvm_test_top.m_env.m_seqr@@m_seq_4 [m_seq_4] Ended body
UVM_INFO testbench.sv(41) @ 60: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x0
UVM_INFO testbench.sv(27) @ 70: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Ended body
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_objection.svh(1271) @ 70: reporter [TEST_DONE] 'run' phase is ready to proceed to the 'extract' phase
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_report_server.svh(847) @ 70: reporter [UVM/REPORT/SERVER] 
--- UVM Report Summary ---

 UVM_SEQ_ARB_STRICT_RANDOM

此模式将始终优先处理优先级最高的序列。多个优先级相同的序列将随机选取。本次测试中，我们将增加序列数量，以便在同一优先级下拥有更多序列。

Without priority

class arb_strict_random_test extends base_test;`uvm_component_utils(arb_strict_random_test)function new(string name, uvm_component parent);super.new(name, parent);endfunctionvirtual task run_phase(uvm_phase phase);super.run_phase(phase);phase.raise_objection(this);m_env.m_seqr.set_arbitration(UVM_SEQ_ARB_STRICT_RANDOM);show_arb_cfg();forkm_seq[0].start(m_env.m_seqr);m_seq[3].start(m_env.m_seqr);m_seq[1].start(m_env.m_seqr);m_seq[2].start(m_env.m_seqr);m_seq[4].start(m_env.m_seqr);m_seq[5].start(m_env.m_seqr);joinphase.drop_objection(this);endtask
endclass

Note that this is similar to UVM_SEQ_ARB_RANDOM mode when there are no priorities.

UVM_INFO @ 0: reporter [RNTST] Running test arb_strict_random_test...
UVM_INFO testbench.sv(90) @ 0: uvm_test_top [TEST] Seqr set to UVM_SEQ_ARB_STRICT_RANDOM
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_4 [m_seq_4] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_5 [m_seq_5] Started body
UVM_INFO testbench.sv(41) @ 10: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x3
UVM_INFO testbench.sv(27) @ 20: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Ended body
UVM_INFO testbench.sv(41) @ 20: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x4
UVM_INFO testbench.sv(27) @ 30: uvm_test_top.m_env.m_seqr@@m_seq_4 [m_seq_4] Ended body
UVM_INFO testbench.sv(41) @ 30: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x0
UVM_INFO testbench.sv(27) @ 40: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Ended body
UVM_INFO testbench.sv(41) @ 40: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x5
UVM_INFO testbench.sv(27) @ 50: uvm_test_top.m_env.m_seqr@@m_seq_5 [m_seq_5] Ended body
UVM_INFO testbench.sv(41) @ 50: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x2
UVM_INFO testbench.sv(27) @ 60: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Ended body
UVM_INFO testbench.sv(41) @ 60: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x1
UVM_INFO testbench.sv(27) @ 70: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Ended body
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_objection.svh(1271) @ 70: reporter [TEST_DONE] 'run' phase is ready to proceed to the 'extract' phase
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_report_server.svh(847) @ 70: reporter [UVM/REPORT/SERVER] 
--- UVM Report Summary ---

With priority

class arb_strict_random_test extends base_test;`uvm_component_utils(arb_strict_random_test)function new(string name, uvm_component parent);super.new(name, parent);endfunctionvirtual task run_phase(uvm_phase phase);super.run_phase(phase);phase.raise_objection(this);m_env.m_seqr.set_arbitration(UVM_SEQ_ARB_STRICT_RANDOM);show_arb_cfg();forkm_seq[0].start(m_env.m_seqr, .this_priority(100));m_seq[1].start(m_env.m_seqr, .this_priority(200));m_seq[2].start(m_env.m_seqr, .this_priority(200));m_seq[3].start(m_env.m_seqr, .this_priority(200));m_seq[4].start(m_env.m_seqr, .this_priority(200));m_seq[5].start(m_env.m_seqr, .this_priority(400));joinphase.drop_objection(this);endtask
endclass

请注意，具有相同优先级的 m_seq_1 到 m_seq_4 是以随机顺序输出的。将此与 UVM_SEQ_ARB_STRICT_FIFO 模式进行比较，在该模式下这些序列是按先进先出（FIFO）顺序输出的。

UVM_INFO @ 0: reporter [RNTST] Running test arb_strict_random_test...
UVM_INFO testbench.sv(90) @ 0: uvm_test_top [TEST] Seqr set to UVM_SEQ_ARB_STRICT_RANDOM
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_4 [m_seq_4] Started body
UVM_INFO testbench.sv(23) @ 0: uvm_test_top.m_env.m_seqr@@m_seq_5 [m_seq_5] Started body
UVM_INFO testbench.sv(41) @ 10: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x5
UVM_INFO testbench.sv(27) @ 20: uvm_test_top.m_env.m_seqr@@m_seq_5 [m_seq_5] Ended body
UVM_INFO testbench.sv(41) @ 20: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x1
UVM_INFO testbench.sv(27) @ 30: uvm_test_top.m_env.m_seqr@@m_seq_1 [m_seq_1] Ended body
UVM_INFO testbench.sv(41) @ 30: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x4
UVM_INFO testbench.sv(27) @ 40: uvm_test_top.m_env.m_seqr@@m_seq_4 [m_seq_4] Ended body
UVM_INFO testbench.sv(41) @ 40: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x2
UVM_INFO testbench.sv(27) @ 50: uvm_test_top.m_env.m_seqr@@m_seq_2 [m_seq_2] Ended body
UVM_INFO testbench.sv(41) @ 50: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x3
UVM_INFO testbench.sv(27) @ 60: uvm_test_top.m_env.m_seqr@@m_seq_3 [m_seq_3] Ended body
UVM_INFO testbench.sv(41) @ 60: uvm_test_top.m_env.m_drv [DRV] Drive packet with addr=0x0
UVM_INFO testbench.sv(27) @ 70: uvm_test_top.m_env.m_seqr@@m_seq_0 [m_seq_0] Ended body
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_objection.svh(1271) @ 70: reporter [TEST_DONE] 'run' phase is ready to proceed to the 'extract' phase
UVM_INFO /playground_lib/uvm-1.2/src/base/uvm_report_server.svh(847) @ 70: reporter [UVM/REPORT/SERVER] 
--- UVM Report Summary ---

 UVM_SEQ_ARB_WEIGHTED

在这种模式下，选择高优先级序列的概率更高。

UVM_SEQ_ARB_USER

如果以上模式均不能满足您的需求，您可以创建自定义仲裁方案。您只需新建一个继承自uvm_sequencer的序列器，并定义其user_priority_arbitration函数即可。

summary

 sequencer 的仲裁对于多个sequence绑定在一个sequencer 时 ，在base test 上使用

        sequencer.set_arbitration(xxxx)的方式实现仲裁方法选择；

        sequence.start(srquencer,parent_sequencer,this_priority,call_pre) 。上述代码使用显示端口引用方式（.端口名称(端口赋值)），支持端口任意顺序赋值；

        带*_strict_*和weighted   仲裁方法会看this_priority 的值，其他不看，赋值也会被忽略；

        *_fifo的仲裁方法会，权重相同时，执行顺序与start的顺序有关（fifo 时保序入，保序出）；

        *_random的仲裁方法会，权重相同时，会随机轮询；

http://www.dtcms.com/a/605118.html

相关文章：

  • Lanelet2 OSM数据格式详解
  • 分布式系统保证数据强一致性的示例
  • Spring Boot性能提升的核武器，速度提升500%！
  • SOLIDWORKS 2025设计效率的大幅提高
  • 比标准Json库好用——json-iterator
  • 汇编语言编译器的作用 | 探讨汇编编译器的工作原理和实际应用
  • C语言编译器下载地址与安装指南
  • kanass实战教程系列(4) - 产品经理如何使用kanass有效管理需求
  • RLS（递归最小二乘）算法详解
  • 红色好看的网站济南网络推广软件公司
  • mvcc 简介
  • UniApp 商品分类左右联动技术文档
  • pytest 入门指南：Python 测试框架从零到一（2025 实战版）
  • SpringBoot教程（三十三）| SpringBoot集成MinIO
  • 【开题答辩全过程】以 基于.NET MVC的线上鞋服交易系统设计与实现为例，包含答辩的问题和答案
  • MySQL 全体系深度解析（存储引擎、事务、日志、MVCC、锁、索引、执行计划、复制、调优）
  • SpringMVC基础教程（1）--MVC/DispathcerServlet
  • 在streampark运行paimon-flink-action-1.20.0.jar
  • AI得贤面试智能体：重构企业招聘新范式
  • 硅基计划6.0 陆 JavaEE HttpHttps协议
  • 稳定边界层高度参数化方案的回归建模
  • 企业网站推广方法wap网站预览
  • 可以做推广的门户网站wordpress适合中国的小插件介绍
  • Dubbo服务治理全解析：从零搭建高可用微服务架构
  • java List怎么转换为Vector
  • 2023年辽宁省数学建模竞赛-B题 数据驱动的水下导航适配区分类预测-基于支持向量机对水下导航适配区分类的研究
  • 机器学习--KNN算法中的距离、范数、正则化
  • openGauss向量数据库功能实操测评：轻量部署下的高维检索能力
  • php做网站还是linuxseo服务外包费用
  • 《算法通关指南：算法基础篇 ---- 二维前缀和 — 1. 【模板】二维度前缀和，2.激光炸弹》